한국재료학회지 (Korean Journal of Materials Research)

  • 제22권12호
  • /
  • Pages.696-700
  • /
  • 2012
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

솔-젤 법을 통해 제조된 강유전체 (Na,K)NbO3 막의 두께에 미치는 PVP의 영향

Influence of PVP on the Thickness of Ferroelectric (Na,K)NbO3 Film by Sol-Gel

  • Kim, Dae-Gun (Green Energy and Environment Laboratory (GE2)) ;
  • Yoo, In-Sang (Green Energy and Environment Laboratory (GE2)) ;
  • Kim, Sae-Hoon (Department of Ceramic Engineering, Gangneung-Wonju National University) ;
  • Kim, Jin-Ho (Korea Institute of Ceramic Engineering and Technology, Optic & Display Materials Team)
  • 투고 : 2012.10.31
  • 심사 : 2012.12.05
  • 발행 : 2012.12.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

(Na, K) $NbO_3$ thick film was successfully achieved using a sol-gel coating process with the addition of polyvinylpyrrolidone (PVP) to a metal alkoxide solution. The transparent coating solution, mixed with Nb:PVP = 1:1 in a molar ration, was synthesized by evaporating the solvent to over 62.5 wt%. Additive PVP increased the viscosity of the solution so that the coating thickness could be enhanced. The thickness of the (Na, K) $NbO_3$ film assisted by PVP was ca. 320 nm at the time of deposition; this value is four times thicker than that of the sample fabricated without PVP. Also, due to PVP binding with the OH groups of the metal alkoxide, the condensation reaction in the film was suppressed. The crystalline size of the (Na, K) $NbO_3$ films assisted by PVP was ca. 15 nm smaller than that of the film fabricated without PVP. After the sintering process at $700^{\circ}C$, the (Na, K) $NbO_3$ films were mainly composed of randomly oriented (Na, K) $NbO_3$ phase of perovskite crystal structure, including a somewhat secondary phase of $K_2Nb_4O_{11}$. However, by adding PVP, the content of the secondary phase became quite smaller than that of the sample without PVP. It was thought that the addition of PVP might have the effect of restraining the loss of potassium and that PVP could hold metalloxane by strong hydrogen bonding before complete decomposition. Therefore, the film thickness of the (Na, K) $NbO_3$ films could be considerably advanced and made more crack-free by the addition of PVP.

키워드

과제정보

연구 과제 주관 기관 : 한국세라믹기술원

참고문헌

  1. S. J. Gross, S. Tadigadapa, T. N. Jackson, S. Trolier- McKinstry and Q. Q. Zhang, Appl. Phys. Lett., 83, 174 (2003). https://doi.org/10.1063/1.1589192
  2. W. Gong, J. F. Li, C. E. Peng, Z. L. Gui and L.T. Li, Adv. Mater., 17, 1952 (2005). https://doi.org/10.1002/adma.200500340
  3. M. H. Kuk, M. H. Kim, J. A. Cho, Y. S. Sung, T. K. Song, D. S. Bae, S. J. Jeong and J. S. Song, Kor. J. Mater. Res., 15(11), 683 (2005) (in Korean). https://doi.org/10.3740/MRSK.2005.15.11.683
  4. K. Singh, V. Lingwal, S. C. Bhatt, N. S. Panwar and B. S. Semwal, Mater. Res. Bull., 36, 2365 (2001). https://doi.org/10.1016/S0025-5408(01)00711-5
  5. E. Ringgaard and T. Wurlitzer, J. Eur. Ceram. Soc., 25, 2701 (2005). https://doi.org/10.1016/j.jeurceramsoc.2005.03.126
  6. J. F. Li, K. Wang, B. P. Zhang and L. M. Zhang, J. Am. Ceram. Soc., 89, 706 (2006). https://doi.org/10.1111/j.1551-2916.2005.00743.x
  7. B. P. Zhang, J. F. Li, K. Wang and H. L. Zhang, J. Am. Ceram. Soc., 89, 1605 (2006). https://doi.org/10.1111/j.1551-2916.2006.00960.x
  8. V. Lingwal, B. S. Semwal and N. S. Panwar, Bull. Mater. Sci., 26, 619 (2003). https://doi.org/10.1007/BF02704326
  9. M. Matsubara, K. Kikuta and S. Hirano, J. Appl. Phys. 97, 114105 (2005). https://doi.org/10.1063/1.1926396
  10. Y. Saito, H. Takao, T. Tani, T. Nonoyama, K. Takatori, T. Homma, T. Nagaya and M. Nakamura, Nature, 432, 84 (2004). https://doi.org/10.1038/nature03028
  11. X. Wang, U. Helmersson, S. Olafsson, S. Rudner, L.D. Wernlund and S. Gevorgian, Appl. Phys. Lett., 73, 927 (1998). https://doi.org/10.1063/1.122040
  12. Y. L. Tu and S. J. Milne, J. Mater. Res., 11, 2556 (1996). https://doi.org/10.1557/JMR.1996.0321
  13. G. W. Scherer. J. Non-Cryst. Solids, 147-148, 363 (1992). https://doi.org/10.1016/S0022-3093(05)80645-3
  14. H. Schmidt, G. Rinn, R. Nab and D. Sporn, Mater. Res. Soc. Symp., 121, 743 (1988). https://doi.org/10.1557/PROC-121-743
  15. Y. -L. Tu, M. L. Calzada, N. J. Phillips and S. J. Milne, J. Am. Ceram. Soc., 79, 441 (1996). https://doi.org/10.1111/j.1151-2916.1996.tb08142.x
  16. H. Kozuka and M. Kajimura, Chem. Lett., 28, 1029 (1999). https://doi.org/10.1246/cl.1999.1029
  17. H. Kozuka and M. Kajimura, J. Am. Ceram. Soc., 83, 1056 (2000).
  18. M. Foroutan, Acta Chim. Slov., 53, 219 (2005).
  19. J. Swei and J. B. Talbot, J. Appl. Polymer Sci., 90, 1153 (2003). https://doi.org/10.1002/app.12799
  20. H. Kozuka and A. Higuchi, J. Mater. Res., 16, 3116 (2001). https://doi.org/10.1557/JMR.2001.0430
  21. H. Kozuka, M. Kajimura, T. Hirano and K. Katayama, J. Sol-Gel Sci. Technol., 19, 205 (2000). https://doi.org/10.1023/A:1008780120351
  22. F. Lai and J. F. Li, Ferroelectrics, 358, 181 (2007). https://doi.org/10.1080/00150190701537257