• Title/Summary/Keyword: siloxane

Search Result 258, Processing Time 0.188 seconds

Effect of Landfill Site Characteristics on Siloxane Production in Landfill Gas (매립지 특성이 매립가스 내 siloxane 발생에 미치는 영향)

  • Nam, Sangchul;Kang, Jeong-Hee;Hur, Kwang-Beom;Lee, Nam-Hoon
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.19 no.3
    • /
    • pp.44-53
    • /
    • 2011
  • Siloxane, organo-silicon compound, is used in the various forms of products such as cosmetics and detergents due to its quality physical chemistry attributes. Siloxane included in landfill gas which is caused in the process of decomposing of such products after landfill has imposed negative impacts on the operation of landfill gas utility facilities. The objective of this study was to investigate the siloxane production characteristics depending on the features of various landfill site in Korea so that the analysis was made on the landfilling age and landfill waste by in terms of its concentration, structure and composition. As for the concentration of siloxane depending on time passage, 12 landfill sites were reviewed by landfilling age. As for production attributes change of siloxane by landfill wastes, the source of wastes, physical production ration and siloxane concentration were compared in 6 landfills. The average concentration of total-siloxane within LFG is $6.75mg/m^3$ and cyclic-siloxane out of it occupies over 93%. By element, D4 and D5 in order take the highest proportion regardless of total-siloxane concentration and landfilling age. Even though this study is not able to verify the different impact of each kind of wastes on the generation of siloxane, it is confirmed that total-siloxane and cyclic-siloxane decrease in line with the increase of landfilling age as it does in the first order decay model for landfill gas.

Characteristics of Siloxane Concentrations in Bio Gas from Anaerobic Digestion of Food Wastewater (음식물류폐기물폐수의 혐기성 소화에서 바이오가스의 실록산 농도 특성)

  • Lee, Chae-Young;Lee, Se-Wook;Park, Su-Hee;Hur, Kwang-Beom;Kim, Hae-Ryong;Lee, Nam-Hoon
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.19 no.4
    • /
    • pp.60-65
    • /
    • 2011
  • Siloxane is an organic silicon compound and is volatilized into the bio gas from anaerobic digestion. It causes failure of gas combustion engines using the bio gas. Siloxane emission characteristics should be identified to provide a proper siloxane control. This study focuses on characterizing siloxane emission in bio gas from an anaerobic digester of food wastewater operating from January to March. The concentrations of total average siloxane and cycle-siloxane D4 were detected to be 9.5 and $4.0mg\;siloxane/m^3$, respectively. The concentrations of cycle-siloxane and linear-siloxane were resulted in D4>D5>D6 and L4>L3>L5>L2, respectively. The total siloxane concentration was the lowest in January and the highest in March.

The Effect of Epoxy and Epoxy-Siloxane Emulsion Treatment on the Anticrease Property of Silk Fabrics (Epoxy 및 Siloxane Emulsion 처리가 견직물의 방추성에 미치는 영향)

  • 장병호;신광호;이병학
    • Textile Coloration and Finishing
    • /
    • v.5 no.1
    • /
    • pp.10-18
    • /
    • 1993
  • Epoxy compound was synthesized from bisphellol-A with epichlorophydrine. Epoxy compound and siloxane were emulsified conjugative one or another. The water repellency of silk fabrics was also highly improved by the treatment of epoxy-siloxane mixed emulsions containing stannic chloride and zirconium oxychloride. The maximum wrinkle recovery was obtained from the fabrics treated under the condition 2.5%-epoxy-siloxane emulsion at 16$0^{\circ}C$. The breaking elongation, the reflectance, the tensile strength and the bending properties of silk fabrics were not degraded severely by the treatment of epoxy-siloxane emulsion.

  • PDF

A Study on Dielectric Strength and Insulation Properly of PDMS (실리콘 폴리머의 내전압 및 절연특성에 관한 연구)

  • 지원영
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.14 no.11
    • /
    • pp.941-946
    • /
    • 2001
  • The fundamental study on HTV silicone for insulation material has been performed. In order to estimate the chemical behavior of siloxane under high voltage, H-NMR, GPC and vinyl contents measurement were used. As an experimental results, after high voltage stress, the molecular weight of siloxane are increased, the vinyl contents of siloxane are decreased. The dielectric strength of vinyl group containing siloxane was lower than only methyl containing siloxane.

  • PDF

Synthesis and characterization of silicone-containing polyamideimide and its gas separation

  • 이용범;심진기;이영무
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • /
    • pp.83-84
    • /
    • 1997
  • 1. INTRODUCTION : Polyimides containing siloxane moiety(poly(imide siloxane), or polysiloxaneimide) have been synthesized because of their some merits over polyimide itseft. Polyimides have excellent thermal and mechanical properties but their poor solubility and processibility in their fullly imidized form give disadvantages in applications. Incorporation of siloxane units make it possible to increase solubility and processibility, and also impart impact resistance, low moisture uptake, low dielectric constant, thermo-oxidative resistance, good adhesion properties to substrate and etc.. Incorporation methods of siloxane groups into the polyimide was mainly copolymerization or terpolymerization between oligomeric dimethylsiloxane and aromatic dianhydride. A few methods of introducing siloxane units in functional groups of polyimide was reported. In our laboratory poly(amideimide siloxane) and poly(imide siloxane) were prepared and the study about their thermal kinetics was performed. In separation membrane area, polysiloxaneimides was utilized in pervaporation and gas separation. Polyimides in gas separation show high selectivity and very low permeability, and introduction of siloxane segments increase permeability with low decrease in selectivity. We aimed to introduce silicone segments into poly(amic acid) state and synthesize polymer partially imidized, and also show the gas separation characteristics of the synthesized polymer.

  • PDF

Synthesis and Properties of Siloxane Containing Copolyimides (실록산이 함유된 폴리이미드의 합성과 물성)

  • Moon, Yoon-Duk;Lee, Young Moo
    • Applied Chemistry for Engineering
    • /
    • v.2 no.4
    • /
    • pp.340-347
    • /
    • 1991
  • Siloxane containing copolyimide (SPI) was synthesized from 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride(BTDA), 4, 4'-methylene dianiline(MDA), 4, 4'-oxydianiline(ODA) and amine-terminated polydimethyl-siloxane(PDMS). Homopolyamic acid(HPAA) in tetrahydrofuran(THF) was reacted with PDMS to obtain siloxane containing polyamic acid(SPAA) followed by the thermal curing to manufacture SPI. SPAA and HPAA exhibited inherent viscosity value of 0.35~0.48dl/g. Glass transition temperature of SPI ranged in $258^{\circ}C{\sim}264^{\circ}C$. SPI had a lower $T_g$ than that of HPI. ODA based HPI and SPI showed slightly higher $T_g$ values, thermal stability, and water content.

  • PDF

Synthesis of Hard Coating Solution for Plastic Display Plate (플라스틱 디스플레이 기판용UV 하드 코팅 용액의 합성)

  • Back, Sung Kyun;Jang, Sun Ho;Cho, Ur Ryong
    • Journal of the Semiconductor & Display Technology
    • /
    • v.16 no.1
    • /
    • pp.45-51
    • /
    • 2017
  • Poly(urethane acrylate) siloxane oligomers with Interpenetrating polymer netwoked nanoparticles were prepared to synthesize hard coating solution by reaction with diisocyanates. The diisocyanate combined siloxane hard coating solution showed more flexibility than the siloxane solution. In addition, diisocyanate resulted in improvement of curl property and surface hardness in the siloxane solution. Of the used diisocyanates, isophorone diisocyanate and acryloyloxy ethyl diisocyanate were good for UV hard coating solution. This effect will decrease brittleness in the siloxane solution using for plastic display plate.

  • PDF

Synthesis and Properties of Poly (trifluoropropylmethyl -dimethyl) Siloxane-Polyurea Copolymers (II)-Synthesis and Mechanical Properties of Polysiloxane-Polyurea Copolymers- (폴리(트리플루오로프로필메틸-디메틸)실록산-폴리요소 공중합체의 합성과 성질(II) -폴리실록산-폴리요소 공중합체의 합성과 기계적 성질-)

  • 박성균;고석원
    • Textile Science and Engineering
    • /
    • v.33 no.3
    • /
    • pp.263-272
    • /
    • 1996
  • In order to improve the mechanical properties and to utilize the useful properties of siloxane, -(AB) - type copolymers hove been the subject of study. The copolymers composed of siloxane(A) with functionalized end group as a soft segment and organic polymer(B) as a hard segment. In this study, -(AB) - type polysiloxane-polyurea copolymers were synthesized by reacting the g, m aminopropyl-terminated poly(1,1,1-kifluoropropylmethyl-dimethy1) siloxane as a soft segment and 4,4'-dicyclohexyl methane diisocyanate(H-MDI) and then 4,4'-methylenebis(cyclohexyl amice)Pl-DAM) as a hard segment in a mixed solvent system of THFINMP. It was found that there was THF/NMP mixture ratio to dissolve the copolymers according to the variations of siloxane content and F/O composition. The effects of the siloxane content, molecular weight, block length and the composition upon the mechanical properties were investigated. It was shown that the mechanical properties related to the degree of phase mixing of hard segment and soft segment.

A Synthesis of UV Hard Coating Solution for Plastic Display Plate Using Poly(Urethane Acrylate) Siloxane Oligomer (Poly(Urethane Acrylate) Siloxane Oligomer를 이용한 플라스틱 디스플레이 기판용 UV 하드코팅 용액의 합성)

  • Back, Sung Kyun;Jang, Sun Ho;Yoo, Seong Sik;Cho, Ur Ryong
    • Journal of the Semiconductor & Display Technology
    • /
    • v.16 no.3
    • /
    • pp.87-92
    • /
    • 2017
  • Poly(urethane acrylate) siloxane oligomers with Interpenetrating polymer networked nanoparticles were prepared to synthesize hard coating solution by reaction with isophorone diisocyanate(IPDI) of 1, 2, 3, 4 phr. The structures and molecular weights of the synthesized solutions were characterized by IR spectroscopy and gel permeation chromatography, respectively. In the cross-cut test for the adhesion, all the solutions showed good adhesion of 5B regardless of the content of IPDI and film thickness. The addition of 1 phr IPDI resulted in the best pencil hardness. The IPDI combined siloxane hard coating solution showed more flexibility than the siloxane solution. These results will yield the improvement in the siloxane solution using for plastic display plate.

  • PDF

Preparation and Adhesive Properties of Acrylate Copolymer with Siloxane Group (실록산기를 함유한 아크릴 공중합체의 제조 및 점착특성)

  • Yoon, Keun-Byoung;Noh, Young-Joo;Lee, Dong-Ho
    • Applied Chemistry for Engineering
    • /
    • v.18 no.2
    • /
    • pp.121-125
    • /
    • 2007
  • Siloxane monomer and oligomer were introduced to n-butyl acrylate and methyl methacrylate copolymer for improvement of water resistance and tactile sensation of acryl-type emulsion. Terpolymerimerization of n-butylacrylate, methyl methacrylate and siloxane monomer or oligomer was carried out in aqueous solution. The glass transition temperature (Tg) of terpolymer decreased with increasing siloxane monomer, however, the Tg of terpolymer increased with increasing siloxane oligomer due to the crosslinking of acrylated end group. The adhesion property and surface energy of the obtained terpolymer decreased with introducing siloxane monomer or oligomer in terpolymer. Decrement of tack and surface energy means the enhancement of water resistance and tactile sensation of the emulsion.