Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지

Joint disturbance torque analysis for independent joint controlled robots and its application in optimal path placement

독립관절제어 로봇의 관절외란해석과 최적경로위치 문제의 해법

  • Choi, Myung-Hwan (Dept. of Control and Instrumentation Engineering, Kangwon National University)
  • 최명환 (강원대학교 제어계측공학과)
  • Published : 1998.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

A majority of industrial robots are controlled by a simple joint servo control of joint actuators. In this type of control, the performance of control is greatly influenced by the joint interaction torques including Coriolis and centrifugal forces, which act as disturbance torques to the control system. As the speed of the robot increases, the effect of this disturbance torque increases, and hence makes the high speed - high precision control more difficult to achieve. In this paper, the joint disturbance torque of robots is analyzed. The joint disturbance torque is defined using the coefficients of dynamic equation of motion, and for the case of a 2 DOF planar robot, the conditions for the minimum and maximum joint disturbance torques are identified, and the effect of link parameters and joint variables on the joint disturbance torque are examined. Then, a solution to the optimal path placement problem is propose that minimizes the joint disturbance torque during a straight line motion. The proposed method is illustrated using computer simulation. The proposed solution method can be applied to a class of robots that are controlled by independent joint servo control, which includes the vast majority of industrial robots.

Keywords

References

  1. Model Based Control of a Robot Manipulator C. H. An(et al.)
  2. Robotics: Control, Sensing. Vision and Intelligence K.S. Fu;R. C. Gonzalez;C. S. G. Lee
  3. Int. J. Robotics Research v.1 no.1 Fast nonlinear control with arbitrary pole-placement for industrial robots and manipulators E. Freund
  4. IEEE Trans. Systems, Man and Cybermatics An approach to nonlinear feedback control with applications to robotics E. G. Gilbert;I. J. Ha
  5. Proc. IEEE Int Conf. Robotics and Automation Real-time implementation and evaluation of model based controls on CMU DD Arm II P. K. Kosla;T. Kanade
  6. J. Dynamic Systems, Measurement, and Control v.101 The application of model-referenced adaptive control to robotics manipulators S. Dubowsky;D. T. DesForges
  7. Proc. IEEE Int. Cong. on Rdobotics and Automation Adaptive control of robot manipulators- A review T. C. Hsia
  8. Proc. IEEE Int. Conf. on Robotics and Automation v.1 A robust decentralizea joint contril based on interference estimation M. Nakao(et al.)
  9. IEEE Trans. on Robotics and Automation v.7 no.5 Robust position control of robotic manipulator in cartesian coordinates C. Y. Kou;S. P. T. Wang
  10. IEEE Trans. Industrial Electronics v.40 no.5 Robust servo system design with two degrees of freedom and its application to novel motion control of robot manipulators T. Umeno;T. Kaneko;Y. Hori
  11. Ph. D. Dissertation, U. C. Berkeley Robust Digital Tracking Controllers for High-Speed/High Accurac Positioning System S. Lee
  12. Proc. IEEE Int. Conf. on Robotics and utomation v.2 Manipulator control based on a disturbance obsever in the operational space K. Kaneko(et al.)
  13. Prco. 11th KACC 외란 관측기를 이용한 직접 구동형 로봇의 고속 고정도 제어 서일홍;엄광식;권기호
  14. Proc. IEEE Int. Conf. on Robotics and Automation Locating assembly tasks in a manipulators work space B. Nelson;K. Pedersen;M. Donath
  15. Proc. IEEE Int. Conf. on Robotics and Automation Optimal parh placement for kinematically redundant manipulators J. S. Hemmerle;F. B. Printz