Seismic Behavior of the Friction Pendulum System in Bridge Seismic Isolation

교량에 설치된 마찰 단진자 시스템의 지진하중에 의한 거동연구

  • 오순택 (서울산업대학교 구조공학과) ;
  • 김영석 ((주) 금호건설 기술연구소 연구원) ;
  • 김연택 (서울산업대학교 구조공학과)
  • Published : 1998.06.01

Abstract

This paper summarizes a study on the application of the friction pendulum system in bridge seismic isolation. Shaking table tests have been carried out on a model structure isolated with F.P.S and the obtained structural responses are compared to those of non-isolated. It can be concluded the F.P.S increases the earthquake resistance capacity of the isolated structure. It is also found that the stiffness of bearing, being controlled by the radius of curvature of the spherical sliding interface, is unaffected by the amplitude of the input excitation. Furthermore, the coefficient of sliding friction is velocity dependent so that in weak excitation the sliding velocity is low and, accordingly, the mobilized friction force is less than the one mobilized in strong excitation. Also, the frictional properties of the bearings remain markedly stable after extensive testing, and the permanent displacements are small and not cumulative in successive earthquakes.

본 연구는 지진격리장치의 일종인 마찰 단진자 시스템(FPS)의 교량에의 적용에 관한 연구이다. FPS에 의하여 지진 격리된 교량과 지진 격리되지 않은 교량의 지진하중 작용시의 응답을 비교하기 위하여 축소모델 교량을 이용한 진동대 실험을 수행하였다. 연구결과, 본 장치를 설치한 경우 지진하중에 대한 지지능력이 향상하는 것으로 나타났다. 또한, 활동면 곡류반경에 의해 조절이 가능한 F.P.S 베어링의 강성은 입력된 kwlsfur의 강도와는 무관하며, 활동면의 마찰계수에 따라 속도가 변화하여 약진시에는 활동면에서의 속도가 작으므로 강진시와 비교하여 지진하중에 의하여 발생하는 마찰력도 감소하게 되었다. 한편 F.P.S 베어링의 마찰특성은 반복된 실험에서도 변화하지 않았고, 영구변형은 약적으로도 작았을 뿐만 아니라 누적되지도 않았다.

Keywords

References

  1. Passive Energy Dissipation Systems in Structural Engineering Soong, T. T.;Dargush, G. T.
  2. Report No. NCEER-88-0038 Teflon bearings in aseismic base isolation. experimental studies and mathematical modeling Mokha, A.;Constantinou, M.C.;Reinhorn, A.M.
  3. Earthquake Engineering and Structural Dynamics v.18 no.1 A comparative study of performance of various base isolation systems, part Ⅰ:shear beam structures Su, L.; Ahmadi, G.;Tadjbakhsh, I.
  4. Earthquake Engineering and Structural Dynamics v.15 no.3 Dynamics of resilient friction base isolator (R-FBI) Mostaghel, N.;Khodaverdian, M.
  5. J. Stuct. Engrg. v.116 no.2 Teflon bearings in base isolation Ⅱ: modeling Constantinou, M.C.;Mokha, A.; Reinhorn, A.M.
  6. Guide specifications for seismic isolation design American Association of State Highway;Transportation Officials-AASHTO
  7. Uniform building code, earthquake regulations for seismicisolated structure International Conference of Building Officials ICBO