Modal Parameter Identification of a Generator Stator Frame for Fossil Power Plants

화력 발전용 발전기 고정자 프레임의 모드매개변수 규명

  • 김철홍 (한국중공업(주) 기술연구원) ;
  • 류석주 (한국중공업(주) 기술연구원) ;
  • 박종포 (한국중공업(주) 기술연구원)
  • Published : 1999.06.01

Abstract

This paper presents numerical and experimental results of modal parameter identification in a generator stator frame for 500 MW fossil power plants. A commercial finite element analysis S/W was employed for modal analysis. The generator is excited by alternating electromagnetic forces, mainly of 120 Hz in 60 Hz machines, due to magnetic field and electric current in windings. It is necessary to verify that the stator frame has adequate frequency margin from the excitation frequency to avoid possible resonance when operating. Thus, frequency margin required for the stator frame is established using the numerical and experimental results. The results show that the stator frame meets the frequency-margin requirements. Also, results of modal analysis for design modification in order to reduce weights of the stator frame without deteriorating vibration characteristics are presented.

Keywords

References

  1. Canadian Electrical Association Thermal and Nuclear Power Section Reliability and Performance...Dual Challenges in The Design of Turbine Driven Generators Fenton, R. E.;Jones, N. H.;Johnson, M. G.
  2. AIEE winter convention Suppression of Magnetic Vibration and Noise of Two-Pole Turbine Generators Penniman, A. L. Jr.;Taylor, H. D.
  3. IEEE Winter Power Meeting no.31 Stator Vibration in Large Two-Pole Generators Richardson, P.
  4. NASA SP-280 Vibration of Shells Leissa, A. W.
  5. Vibrations of Shells and Plate Soedel, W.
  6. The Mechanics of Vibration of Cylindrical Shells Markus, S.
  7. ANSYS Users Manual v.Ⅲ Swanson Analysis Inc.
  8. I-DEAS Modal Analysis Users Guide SDRC Inc.
  9. Finite Element Model Updating in Structural Dynamics Friswell, M. I.;Mottershead, J. E.
  10. 연구 보고서 발전기 고정자 프레임 진동 해석 한국중공업(주)