DOI QR코드

DOI QR Code

Factors governing redistribution of moment in continuous prestressed concrete beams

  • Kodur, V.K.R. (Institute for Research in Construction, National Research Council Canada) ;
  • Campbell, T.I. (Department of Civil Engineering, Queen's University)
  • Published : 1999.08.25

Abstract

The failure load of a continuous prestressed concrete beam depends partially on the amount of redistribution of moment that occurs prior to failure. Results from a parametric study, carried out using a nonlinear finite element computer program, are presented to demonstrate the influences of various factors on redistribution of moment in two-span, continuous bonded prestressed concrete beams. Trends in the data from the numerical studies are compared with those from a theoretical expression for percentage of redistribution, and it is shown that the redistribution of moment occurring in a continuous prestressed concrete beam is a function of number of parameters.

Keywords

References

  1. ACI Committee 318. (1995), "Building code requirements structural concrete (ACI318-95) and commentary (ACI 318R-95)", American Concrete Institute, Detroit, MI.
  2. Bazant, Z. P., Pan, J. and Pijaudier-Cabot, G. (1987), "Softening in reinforced concrete beams and frames", Journal of Structural Engineering, 113(12), 2333-2347.
  3. Bhatia, S. (1984), "Continuous prestressed concrete beams in the inelastic range", M.Sc. Thesis, Department of Civil Engineering, Queen's University, Kingston, Ontario, Canada.
  4. Campbell, T. I. and Kodur, V. K. R. (1990), "Deformation controlled nonlinear analysis of prestressed concrete continuous beams", PCI JOURNAL, 35(5), 42-90.
  5. CSA (Canadian Standards Association) (1994), "Design of concrete structures", A23.3-94, Rexdale, Canada.
  6. Cohn, M. Z. (1986), "Continuity in prestressed concrete", Partial Prestressing, From Theory to Practice, 1, Martinus Nijhoff Publishers, Boston, USA, 189-256.
  7. Cohn, M. Z. and Bartlett, M. (1982), "Computer-simulated flexural tests of partially prestressed concrete sections", ASCE Journal of the Structures Division, 108(ST 12), 2747-2765.
  8. Cohn, M. Z. and Lounis, Z. (1991), "Moment redistribution in standard concrete codes", Canadian Journal of Civil Engineering, 18(2), 92-108.
  9. Gattesco, N and Cohn, M. Z. (1989), "Computer-simulated tests on moment redistribution - Part 1: Ultimate limit state considerations", Study E Richere - No. 11, Politecnico de Milano, Italia, 269- 299.
  10. CEB-FIP (1990), "CEB-PIP model code 1990", Comite Euro-International du Beton, Lausanne, Switzerland.
  11. Kodur, V. K. R. (1992), "Redistribution of moment and the lifluence of secondary moment on continuous prestressed concrete beams", Ph.D. Thesis, Department of Civil Engineering, Queen's University, Kingston, Ontario, Canada.
  12. Kodur, V. K. R. and Campbell, T. I. (1996), "Evaluation of moment redistribution in a two-span continuous prestressed concrete beam", American Concrete Institute (ACI) Structural Journal, 93(6), 721-728.
  13. Kodur, V. K. R. and Campbell, T. I. (1995), "A computer program for the non-linear analysis of prestressed concrete continuous beams", 'External Prestressing in Structures', AFPC, Paris, France, 75-86.
  14. Moucessian, A. (1986), "Nonlinearity and continuity in prestressed concrete beams", Ph.D. Thesis, Department of Civil Engineering, Queen's University, Kingston, Ontario, Canada.
  15. Moucessian, A. and Campbell, T. I. (1988), "Prediction of the load capacity of two-span continuous prestressed concrete beams", PCI JOURNAL, 33(2), 130-151. https://doi.org/10.15554/pcij.03011988.130.151
  16. Naaman, A. E., Harajili, M. H. and Wight, J. K. (1986), "Analysis of ductility in partially prestressed concrete flexural members", PCI Journal, 31(3), 64-87. https://doi.org/10.15554/pcij.05011986.64.87
  17. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley and Sons, New York, N.Y.
  18. Park, R., Priestley, M. J. N. and Scott, B. D. (1982), "Stress-strain behaviour of concrete confined by overlapping hoops at low and high strain", ACI Journal, Proceedings, 79(1), 13-27.
  19. SAA (Standards Association of Australia), (1994), "Concrete structures", AS 3600, Homebush, Australia.
  20. Sveinson, T., and Dilger, W. H. (1991), "Moment redistribution in reinforced concrete structures", Progress in Structural Engineering, Kluwer Academic Publishers, Boston, MA, 51-70.
  21. Warner, R. F. and Yeo, M. F. (1986), "Ductility requirements for partially prestressed concrete", Partial Prestressing, From Theory to Practice, II, Martinus Nijhoff Publishers, Boston, MA, 316-326.
  22. Wyche, P., Uren, G. and Reynolds, G. (1992), "Interaction between prestress secondary moments, moment redistribution, and ductility - A treatise on the Australian concrete code", ACI Structural Journal, 89(1), 57-70.

Cited by

  1. Redistribution of moments in reinforced high-strength concrete beams with and without confinement vol.55, pp.2, 2015, https://doi.org/10.12989/sem.2015.55.2.379
  2. Factors affecting moment redistribution at ultimate in continuous beams prestressed with external CFRP tendons vol.66, 2014, https://doi.org/10.1016/j.compositesb.2014.05.007
  3. Numerical modelling of nonlinear behaviour of prestressed concrete continuous beams vol.15, pp.3, 2015, https://doi.org/10.12989/cac.2015.15.3.373
  4. External CFRP tendon members: Secondary reactions and moment redistribution vol.57, 2014, https://doi.org/10.1016/j.compositesb.2013.10.010
  5. Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum vol.19, pp.5, 2002, https://doi.org/10.1108/02644400210435843
  6. Moment redistribution in two-span prestressed NSC and HSC beams vol.50, pp.6, 2017, https://doi.org/10.1617/s11527-017-1116-5
  7. Moment Redistribution in EPC Continuous Curved Box Beams vol.22, pp.8, 2017, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001055
  8. New analytical method for computing moment redistribution in RC beams under concentrated load vol.22, pp.2, 1999, https://doi.org/10.1080/13287982.2021.1912518