An Experimental Study on the Stick-Slip Vibration of the Clutch during Starting of a Vehicle

차량 출발 시 클러치에서의 고착-미끄럼 진동현상에 관한 실험적

  • 김상수 (대우자동차 기술연구소, 아주대학교 대학원) ;
  • 장한기 (고등기술연구원 소음진동기술센터) ;
  • 조연 (고등기술연구원 소음진동기술센터) ;
  • 박영원 (아주대학교 대학원 시스템공학과) ;
  • 채장범 (아주대학교 대학원 시스템공학과)
  • Published : 2001.06.01

Abstract

A friction-type clutch system sometimes generates spick-slip vibration during engagement, which disturbs smooth start of a car and makes a passenger uncomfortable. In this study, the spick-slip vibration in four types of friction couples was investigated at two different engagement conditions respectively of which the amount of slip time and clutch travel was varied. Results are found as follows. First, the vibration increased at the condition of small engine torque and large torque fluctuations due to higher harmonics of engine speed. Second, the friction couple without a pre-damper has advantages of reducing the vibration. This study also suggested an evaluation method of vehicle vibration in the view point of human perception by using the frequency weighting of ISO2631-1.

Keywords

References

  1. SAE 951318 An Analysis of Clutch Judder Takeshi S.;Kiyoaki S.
  2. SAE 982846 Self-Excited Vibrations During Engagements of Dry Friction Clutchs Christoper C.B.;Andrew S.
  3. 전북대 박사학위 논문 자동차 클러치 시스템의 비틀림 진동 특성에 관한 연구 윤영진
  4. 한국 자동차공학회 추계학술대회(2000-03-2196) v.1 차량 출발시 클러치 시스템에 의한 고착-미끌림진동 현상에 관한 연구 김상수;조연;이현구
  5. SAE Technical Paper 951319 An Analysis of Clutch Self-Excited Vibration in Automotive Drive Line Noriyasu Yamada;Kunihiki Ando
  6. 14th FISITA Congress CLUTCH JUDDER Newcombe, T.P.;Spurr, R.T.
  7. SAE Technical Paper 941031 Friction Material for Continous Slip Torque Converter Applications : Anti-Shudder Considerations Lam, Rober C. Yih-Fang
  8. 한국소음진동공학회지 v.5 no.1 주행시 비틀림진동 저감을 위한 클러치 비틀림 특성 연구 정태진 외 2인
  9. ISO 2631-1 Mechanical Vibration and Shock- Evaluation of Human Exposure to Whole-Body Vibration - Part 1 : General Requirements International Organization for Standardization