Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

A New 6-DOF Parallel Haptic Device: Optimum Design and Analysis

새로운6자유도 병렬형 햅틱 기구의 최적설계 및 해석

  • Published : 2003.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

A new 6-DOF parallel haptic device is proposed. Many existing haptic devices require large power due to having floating actuator and also have small workspaces. The proposed new mechanism can generate 6-DOF reflecting force. This device is relatively light by employing non-floating actuators and has large workspace. Kinematic analysis and kinematic optimal design is performed for this mechanism. Dexterous workspace, global isotropic index, and global maximum force transmission ratio are considered as kinematic design indices. To deal with such multi-criteria optimization problem. composite design index is employed. For the given operational specifications, actuator sizing for this mechanism is also carried out.

Keywords

References

  1. R. C. Goertz, 'Fundamentals of General-purpose remote manipulators,' Journal of Nucleonics, Vol. 10, No. 11, pp. 36-42, 1952
  2. R. E. Ellis, O. M. Ismaeil, and M. G. Lipsett, 'Design and evaluation of High-performance haptic interface,' Robotica, Vol. 4, 1996
  3. T. Massie, K. Stalisbury, 'Phantom haptic interface: A device for probing virtual objects,' ASME Journal of Dynamic System and Control, New York, NY, pp. 295-299, 1994
  4. J. Berkelman, R. L. Hollis, and S. E. Salcudean, 'Interacting with virtual environments using a magnetic levitation haptic interface,' Proceedings of IEEE International Conference on Intelligent Robots and Systems, pp. 117-122, piscataway, NJ, 1995 https://doi.org/10.1109/IROS.1995.525784
  5. M. Bergamasco, et al., 'An arm exoskeleton system for teleoperation and virtual environments applications,' Proceedings of the 1994 IEEE International Conference on Robotics and Automation, San Diego, California, pp. 1449-1454, 1994 https://doi.org/10.1109/ROBOT.1994.351286
  6. M. Ishii and M. Sato, 'A 3D spatial interface device using tensed strings,' Presence-Teleoperators and Virtual Environments, Vol. 3, No. 1, MIT Press, Cambridge, MA, pp. 81-86, 1994
  7. J. M. Hollerbarch, 'Some current issues in haptic research,' Proceedings of the 2000 IEEE International Conference on Robotics and Automation, pp. 757-762, 2000 https://doi.org/10.1109/ROBOT.2000.844142
  8. J. H. Lee, B.-J. Yi, S. R. Oh, and I. H. Suh, 'Optimal design and development of a Five-bar finger with redundant actuation,' Mechatronics, Vol. 11, No. 1, pp. 27-42, 2000 https://doi.org/10.1016/S0957-4158(99)00089-6
  9. Z. Michalewicz, 'Genetic algorithms + Data structures = Evolution Programs,' Springer, 1996
  10. L. J. Stocco, S. E. Salcudean, and F. Sassani, 'On the use of scaling matrices for Task-specific robot design,' IEEE Transactions on Robotics And Automation, Vol. 15, No. 5, October 1999 https://doi.org/10.1109/70.795800
  11. M. Thomas, H. C. Yuan-Chou, and D. Tesar, 'Optimal actuatorsizing for robotic manipulators based on local dynamic criteria,' ASME Journal of Mechanisms, Transmissions and Automation in Design, Vol. 107, pp. 163-169, 1985 . https://doi.org/10.1115/1.3258705
  12. L. -W. Tsai, G. C. Walsh, and R. E. Stamper, 'Kinematics of a Novel three DOF translational platform,' Proceedings of the 1996 IEEE International Conference on Robotics and Automation, pp. 3446-3451, 1996 https://doi.org/10.1109/ROBOT.1996.509237
  13. L. -W. Tsai, S. Joshi, 'Comparison study of architectures of four 3 Degree-Of-Freedom translational parallel manipulators,' Proceedings of the 2001 IEEE International Conference on Robotics and Automation, pp. 1283-1288, 2001 https://doi.org/10.1109/ROBOT.2001.932787
  14. J. W. Yoon, J. h. Ryu, 'Design, fabrication, and evaluation of a new haptic device using a parallel mechanism,' IEEE Transactions on Mechatronics, Vol. 6, No. 3, Sept. 2001 https://doi.org/10.1109/3516.951360
  15. http://www.robot.gmc.ulaval.ca/recherche/theme05_a.html
  16. C. M. Gosselin, J. -F. Allan and T. Lalibert, 'A new architecture for a High-performance 6-DOF parallel mechanism,' Proceeding of the IFToMM Tenth World Congress on the Theory of Machine and Mechanisms, Oulu, Finland, 20-24 June, pp. 1140-1145, 1999
  17. J. W. Kim, F. C. Park, S. J. Ryu, J. W. Kim, J. C. Hwang, C. B. Park, and C. C. Iurascu, 'Design and analysis of a redundantly actuated parallel mechanism for rapid machining,' IEEE Transactions on Robotics And Automation, Vol. 17, No. 4, Aug. 2001 https://doi.org/10.1109/70.954755
  18. R. Kurtz and V. Hayward, 'Multiple-goal kinematic optimization of a parallel spherical mechanism with actuator redundancy,' IEEE Transactions On Robotics and Automation, Vol. 8, No. 5, Oct. 1992 https://doi.org/10.1109/70.163788
  19. S. -K. Song, D. -S. Kwon, 'New methodology for the forward kinematics of 6-dof parallel manipulators using tetrahedron configurations,' Proceedings of the 2001 IEEE International Conference on Robotics and Automation, pp. 1307-1312, 2001 https://doi.org/10.1109/ROBOT.2001.932791
  20. J. H. Lee, K. S. Eom, B. -J. Yi, and I. H. Suh, 'Design of a new 6-DOF parallel haptic device,' Proceedings of the 2001 IEEE International Conference on Robotics And Automation, pp. 886-891, 2001 https://doi.org/10.1109/ROBOT.2001.932662
  21. J. H. Lee, H. W. Kim, B.-J. Yi, I. H. Suh, 'Singurarity-free algorithms and design scheme for a new 6-DOF parallel haptic device,' Proceedings of the 2002 IEEE International Conference on Robotics and Automation, pp. 4229-4235, 2002
  22. Proceedings of the 2002 IEEE International Conference on Robotics and Automation Singurarity-free algorithms and design scheme for a new 6-DOF parallel haptic device J. H. Lee;H. W. Kim;B.-J.Yi;I. H. Suh