Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Real-time transmission properties of industrial switched Ethernet with cascade structure

다계층 구조를 가진 산업용 스위치드 이더넷에서의 실시간 전송 특성

  • 이경창 (부산대학교 기계공학부) ;
  • 이석 (부산대학교 기계공학부)
  • Published : 2004.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The real-time industrial network, often referred to as fieldbus, is an important element for intelligent manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet with cascade structure for industrial communications. More specifically, this paper presents an analytical performance evaluation of switched Ethernet with cascade structure, and a case study about networked control system.

Keywords

References

  1. 홍승호, 손병관, 'Foundatin Fieldbus 에서의 긴급 데이터의 시간지연 성능해석 및 실험적 검증,' 제어자동화시스템공학 논문지, 제9권, 제7호, pp. 569-576, 2003
  2. 이재수, 박홍성, 홍성수, '페트리네트를 이용한 필드버스 시스템의 성능 해석,' 제어.자동화.시스템공학 논문지, 제2권, 제3호, pp. 220-228, 1996
  3. IEC 61158-4, Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification, 1999
  4. G. Kaplan, 'Ethernet's winning ways,' IEEE Spectrum, vol. 38, no. 1, pp. 113-115, 2001 https://doi.org/10.1109/6.893358
  5. J. H. Park and Y. C. Yoon, 'An extended TCP/IP protocol for real-time local area network,' Control Engineering Practice, vol. 6, pp. 111-118, 1998 https://doi.org/10.1016/S0967-0661(97)10049-1
  6. W. Stalling, Local and Metropolitan Area Network, 6th Ed. Macmillan Publishing Company, 2000
  7. 이경창, 김태준, 이석, 실시간 산업용 통신을 위한 Switched Ethernet 의 성능 평가, 제어 자동화 시스템공학논문지, 제9권, 제1호, pp. 90-98, 2003 https://doi.org/10.5302/J.ICROS.2003.9.1.090
  8. M. Y. Chow and Y. Tipsuwan, 'Network-based control system: a tutorial,' The 27th Annual Conference of the IEEE Industrial Electronics Society, pp. 1593-1602, 2001 https://doi.org/10.1109/IECON.2001.975529
  9. 이경창, 이석, Profibus-DP 를 이용한 네트워크 기반 제어 시스템의 원격 퍼지 제어, 제어 자동화 시스템공학 논문지, 제8권, 제4호, pp. 281-287, 2002 https://doi.org/10.5302/J.ICROS.2002.8.4.281
  10. IEEE Standard 802.3, Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications, 2000
  11. B. Y. Choi, S. Song, N. Birch and J. Huang, 'Probabilistic approach to switched Ethernet for real-time control applications,' Proceedings of Seventh International Conference on Real-Time Computing Systems and Applications, pp. 384-388, 2000 https://doi.org/10.1109/RTCSA.2000.896415
  12. K. Bender, Profibus - The Fieldbus for Industrial Automation, Prentice-Hall, pp. 4-7, 1993
  13. 이경창, 김인준, 이석, '공장자동화를 위한 필드버스 프로토콜의 평가,' 한국정밀공학회지, 제16권 제3호, pp. 116-127, 1999
  14. EN 50170, Profibus Specification - Normative Parts of PROFIBUS-FMS, -DP, -PA according to the European Standard, vol 2, Profibus International, 1998
  15. K. Ogata, Modern Control Engineering, Prentice-Hall, pp.257-270, 1990