Adsorption of Amine and Sulfur Compounds by Cobalt Phthalocyanine Derivatives

코발트 프탈로시아닌 유도체에 의한 아민 및 황 화합물의 흡착

  • Lee, Jeong Se (School of Chemical Engineering and Bioengineering, Ulsan University) ;
  • Lee, Hak Sung (School of Chemical Engineering and Bioengineering, Ulsan University)
  • 이정세 (울산대학교 생명화학공학부) ;
  • 이학성 (울산대학교 생명화학공학부)
  • Received : 2007.07.18
  • Accepted : 2007.09.27
  • Published : 2007.12.10

Abstract

The adsorption capability of cobalt phthalocyanine derivatives was investigated by means of X-ray diffractometor (XRD), FT-IR spectroscopy, scanning electron microscopy (SEM), and temperature programmed desorption (TPD). According to TPD results for ammonia, cobalt phthalocyanine derivatives showed two desorption peaks at low temperature ($100{\sim}150^{\circ}C$) and high temperature ($350{\sim}400^{\circ}C$) indicating that there were two kinds of acidities. Tetracarboxylic cobalt phthalocyanine (Co-TCPC) has a stronger desorption peak (chemical adsorption) at high temperature and a weaker desorption peak (physical adsorption) at low temperature than cobalt phthalocyanine (Co-PC). The specific surface areas of Co-TCPC and Co-PC were 37.5 and $18.4m^2/g$, respectively. The pore volumes of Co-TCPC and Co-PC were 0.17 and $0.10cm^3/g$, respectively. The adsorption capability of triethyl amine calculated by breakthrough curve at 120 ppm of equilibrium concentration was 24.3 mmol/g for Co-TCPC and 0.8 mmol/g for Co-PC. The removal efficiencies of dimethyl sulfide of Co-TCPC and Co-PC in batch experiment of 225 ppm of initial concentration were 92 and 18%, respectively. The removal efficiencies of trimethyl amine of Co-TCPC and Co-PC in batch experiment of 118 ppm of initial concentration were 100 and 17%, respectively.

Temperature programmed desorption (TPD), XRD, SEM 및 FT-IR를 이용하여 코발트 프탈로시아닌 유도체의 황과 아민화합물에 대한 흡착효율을 조사하였다. 코발트 프탈로시아닌 유도체의 암모니아에 대한 TPD 측정결과, 산도가 낮은 온도($100{\sim}150^{\circ}C$)와 높은 온도($350{\sim}400^{\circ}C$)에서 두개의 탈착피크가 나타났다. 테트라카르복실 코발트프탈로시아닌(Co-TCPC)은 코발트 프탈로시아닌(Co-PC)보다 낮은 온도(물리적 흡착)에서 탈착피크가 약했지만 높은 온도(화학적 흡착)에서 강한 탈착피크가 나타났다. Co-TCPC와 Co-PC의 비표면적은 각각 37.5와 $18.4m^2/g$이었다. Co-TCPC와 Co-PC의 기공부피는 각각 0.17과 $0.10cm^3/g$이었다. 파과곡선으로부터 흡착용량을 계산하였더니 트리에틸 아민 가스 120 ppm의 평형농도에서 Co-TCPC의 흡착용량은 24.3 mmol/g, Co-PC의 흡착용량은 0.8 mmol/g로 나타났다. Co-TCPC와 Co-PC로 디메틸 술파이드 제거효율은 디메틸 술파이드 초기농도 225 ppm에서 각각 92와 18% 제거효율을 보였다. Co-TCPC와 Co-PC로 트리메틸아민 제거효율은 트리메틸아민 초기농도 118 ppm에서 각각 100.0%와 17.0% 제거효율을 보였다.

Keywords

Acknowledgement

Supported by : 울산지역환경기술개발센터

References

  1. K. S. Kim and Y. C. Chun, J. Kor. Chem. Soc., 33, 662 (1989)
  2. Y. L. Lee, C. Y. Hsiao, and R. H. Hsiao, Thin Solid Films, 468, 280 (2004) https://doi.org/10.1016/j.tsf.2004.04.060
  3. T. Kitamura, K. Kanai, T. Yamaoka, K. Sato, and K. Toyofuku, J. Imag. Sci., 34, 230 (1990)
  4. K. S. Kim, Y. W. Lee, and Y. J. Kim, J. Ind. Sci. and Tech. Inst., 2, 31 (1988)
  5. N. B. McKewon, Phthalo cyanine materials, Cambridge University Press, 1 (1998)
  6. E. G. Girenko, S. A. Borisenkova, and O. L. Kaliya, Rus. Chem. Bull., 51, 1231 (2002) https://doi.org/10.1023/A:1020900529609
  7. M. J. Lee, S. W. Nam, W. Y. Lee, H. K. Rhee, and B. P. Sung, J. of the KIChE, 25, 71 (1987)
  8. J. W. Choe and C. S. Lee, J. Ind. Eng. Chem., 10, 239 (2004)
  9. W. Herbst and K. Hunger, VCH, Industrial Organic Pigments, New York, 418 (1993)
  10. T. F. Tadros, Solid-Liquid Dispersion, Academic Press., London, 186 (1987)
  11. D. L. Cho, C. N. Choi, H. J. Kim, and A. K. Kim, J. Kor. Fib. Soc., 36, 943 (1999)
  12. J. S. Lee and H. S. Lee, J. Ind. Eng. Chem., 18, 41 (2007)
  13. D. J. Kim, S. G. Seo, and S. C. Kim, J. Kor. Soc. Atmos. Env., 21, 155 (2005)
  14. H. Shirai and T. Yokozeki, J. Frag., 13, 83 (1985)