DOI QR코드

DOI QR Code

Development of High-Speed RFID Reader System

고속 RFID Reader 시스템 개발

  • 신재호 (인천대학교 전자공학과) ;
  • 홍연찬 (인천대학교 전자공학과)
  • Published : 2007.09.01

Abstract

This paper proposed a transponder detection method to reduce recognition time in RFID system. It's also shown that conventional procedure of communication in the system could cause a waste of time when a reader recognizes a transponder. The reduction of recognition time can be obtained by developing a circuit to detect a transponder actively. Detecting a transponder is achieved by using the voltage variation of reader antenna voltage that happens when a transponder approaches to the vicinity of magnetic field formed by the reader. By adding a comparator to the antenna receiver of a reader, the reader can perceive approach or existence of a transponder. A reader for experiment is made using the MFRC500 by Phillips that supports ISO/IEC 14443 protocol. Comparing the proposed method with the conventional methods by experiment, there are 47.5ms reduction of recognition time maximally and 12ms in average.

Keywords

References

  1. 김상태, 'RFID 기술개요 및 국내외 동향 분석,' 전자부품연구원 전자정보센터, Aug. 2003
  2. 장동원 조평동, 'RFID 기술기준 도입을 위한 기술분석,' 전자통신동향분석, Dec. 2003
  3. 이근호 김대희, 'RFID 기술 및 산업동향,' 주간 전자정보 Nov.' 2003
  4. ISO/lEC 14443-1, Identification Cards-Contactless Integrated circuit(s) Proximity Cards Part 1: Physical charateristics, International Standard, April 2000
  5. ISO/lEC 14443-2, Identification Cards-Contactless Integrated circuit(s) Proximity Cards Part 2: Radio frequency power and signal interface, International Standard, July 2001
  6. ISO/lEC 14443-3, Identification Cards-Contactless Integrated circuit(s) Proximity Cards Part 3: Initialisation and anticollision, International Standard, Feb. 2001
  7. ISO/lEC 14443-4, Identification Cards-Contactless Integrated circuit(s) Proximity Cards Part 4: Transmission protocal, International Standard, Feb. 2001
  8. Klaus Finkenzeller, RFID Handbook, John Wiley & Sons, Chichester, 2003, PP 61-110
  9. T. B. Lee, Y. C. Hong, and Y. H. Kim, 'Design of active RFID reader for fast recognition time,' IEEE International Symposium on Industrial Electronics, Montreal, Canada, July 9-13, 2006

Cited by

  1. RFID Based Indoor Localization and Effective Tag Arrangement Method vol.16, pp.12, 2015, https://doi.org/10.5762/KAIS.2015.16.12.8760
  2. Indoor Positioning Using RFID Technique vol.20, pp.1, 2016, https://doi.org/10.6109/jkiice.2016.20.1.207