Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

Seismic Response Prediction Method of Cabinet Structures in a Nuclear Power Plant Using Vibration Tests

진동시험을 이용한 원자력발전소 캐비닛 구조의 지진응답예측기법

  • 구기영 (KAIST 스마트사회기반시설 연구센터) ;
  • 취진타오 (군산대학교 토목환경공학부) ;
  • 조성국 ((주)제이스코리아 기술연구소) ;
  • 김두기 (군산대학교 토목환경공학부)
  • Published : 2008.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a seismic response prediction method using vibration tests of cabinet-type electrical equipment installed in a nuclear power plant. The proposed method consists of three steps: 1) identification of earthquake-equivalent forces based on lumped-mass system idealization, 2) identification of a state-space-equation model relating input-output measurements obtained from the vibration tests, 3) seismic prediction using the identified earthquake-equivalent forces and the identified state-space-equation. The proposed method is advantageous compared to other methods based on FEM (finite element method) model update, since the proposed method is not influenced by FEM modeling errors. Through a series of numerical verifications on a frame model and 3-dimensional shell model, it was found that the proposed method could be used to accurately predict the seismic responses, even under considerable measurement noise conditions. Experimental validation is needed for further study.

본 연구는 원자력발전소에 설치되는 캐비닛형 전기기기의 동적 진동시험 자료를 이용하여 캐비닛의 지진응답을 예측할 수 있는 기법을 제안하였다. 제안된 기법은 1) 절점질량 이상화 모델에 기반한 등가 지진하중 산정, 2) 진동시험자료에 기반한 캐비닛 구조의 입출력 상태방정식 규명, 3) 산정된 등가지진하중과 규명된 입출력 상태방정식을 사용한 지진응답산정의 과정으로 구성된다. 제안된 기법은 유한요소기법(FEM) 모델 개선(Model Updating)에 기반한 지진응답예측기법에 비하여 모델링 오차가 개입 되지 않는 장점을 가진다. 캐비넷 구조를 이상화한 2차원 프레임 모델과 3차원 상세 모델에 대한 수치검증을 통하여 제안된 기법이 지진응답을 매우 정확하게 예측을 함을 관찰하였고, 측정 노이즈에 대해서도 강인함을 관찰하였다. 추후연구로 실험검증이 요구된다.

Keywords

References

  1. 조성국, 방기성, 김두기, 정영운, "현장 충격시험에 의한 고리1호기 전기기기의 동특성분석," 2008년도 한국지진공학회 학술발표회 논문집, 12권, 2008, pp. 63-70
  2. 이계희, 김재민, 김상윤, "원자력 발전소 캐비닛구조물의 내진보강," 한국지진공학회 논문집, 제7권, 제4호, 2003, pp. 31-37
  3. 이경진, 함경원, 서용표, 윤현도, "원전 주제어실3차원 층 지진격리시스템의 진동대 실험 연구," 한국지진공학회 논문집, 제12권, 제1호, 2003, pp. 31-37
  4. 이계희,하동호,"$\mu$-GA를 이용한 원전 캐비닛구조물의 최적감쇠보강," 한국지진공학회 논문집, 제9권, 제1호, 2005, pp. 1-7 https://doi.org/10.5000/EESK.2005.9.1.001
  5. NUREG-1030 : Seismic Qualification of Equipment in Operating Nuclear Power Plants (USI A-46), February 1987
  6. NUREG-1211 : Regulatory Analysis for Resolution of Unresolved Safety Issue A-46, Seismic Qualification of Equipment in Operating Plants, February 1987
  7. Seismic Qualification Utility Group (SQUG), Generic Implementation Procedure for Seismic Verification of Nuclear Plant Equipment, SQUP, 1992
  8. Electrical Power Research Institute (EPRI), Guidelines for Development of In-Cabinet Amplified Response Spectra for Electrical Benchboards and Panels, EPRI, NP-7146-SL, 1990
  9. Electrical Power Research Institute (EPRI), Guidelines for Development of In-Cabinet Demand for Devices Mounted in Electrical Cabinets, EPRI, NP-7146-SL R1, 1995
  10. Overschee, P. V. and Moor, B. D. "N4SID: Subspace algorithms for the identification of combined deterministicstochastic systems," Automatica 30(1), special issue on statistical signal processing and control, 1994, pp. 75-93 https://doi.org/10.1016/0005-1098(94)90230-5
  11. Ljung, L., System Identification: Theory for the User, second Ed., Prentice-Hall, NJ 07458, USA, 1999
  12. MIDAS Civil 2006 Online Manual, MIDAS Information Technology Co., Ltd. 2005
  13. Gupta, A., Rustogi, S. K., and Gupta, A. K., "Ritz vector approach for evaluating incabinet response spectra," Nuclear Engineering and Design, 190, 1999, pp. 255-272 https://doi.org/10.1016/S0029-5493(99)00076-X
  14. Yang, J. and Gupta, A., "Ritz vector approach forstaticand dynamic analysisof plateswith edge beams," Journal of Sound and Vibration, 253(2), 2002, pp. 373-388 https://doi.org/10.1006/jsvi.2001.4047
  15. Yang, J. and Gupta, A., "Modified Ritz vector approach for dynamic properties of electrical cabinets and control panels," Nuclear Engineering and Design, 217, 2002, pp. 49-62 https://doi.org/10.1016/S0029-5493(02)00133-4
  16. Yang, J, Rustogi, S. K., and Gupta, A., "Rocking stiffness of mounting arrangements in electrical cabinets and control panels," Nuclear Engineering and Design, 219, 2002, pp. 127-141 https://doi.org/10.1016/S0029-5493(02)00279-0
  17. Rustogil, S. and Gupta, A., "Modeling the Dynamic Behavior of Electrical Cabinets and Control Panels: Experimental and Analytical Results," Journal of Structural Engineering, Vol. 130, No. 3, March 1, 2004