DOI QR코드

DOI QR Code

Preparation and assessment of airborne fibrous reference sample for a proficiency test

국내 공기 중 섬유상 분진 숙련도 시험용 표준시료 제조 및 평가

  • Lim, Hoju (Indoor Environmental Research Team, National Institute of Environmental Research) ;
  • Ryu, Jaihyuk (Indoor Environmental Research Team, National Institute of Environmental Research) ;
  • Choi, Sungho (Indoor Environmental Research Team, National Institute of Environmental Research) ;
  • Choi, Arum (Indoor Environmental Research Team, National Institute of Environmental Research) ;
  • Jung, Hyunsung (Indoor Environmental Research Team, National Institute of Environmental Research) ;
  • Ryu, Jungmin (Indoor Environmental Research Team, National Institute of Environmental Research) ;
  • Kim, Hyunwook (Dept. of Preventive Medicine, Coll. of Medicine, The Catholic University of Korea) ;
  • Jang, Seongki (Indoor Environmental Research Team, National Institute of Environmental Research)
  • 임호주 (국립환경과학원 실내환경연구팀) ;
  • 유재혁 (국립환경과학원 실내환경연구팀) ;
  • 최성호 (국립환경과학원 실내환경연구팀) ;
  • 최아름 (국립환경과학원 실내환경연구팀) ;
  • 정현성 (국립환경과학원 실내환경연구팀) ;
  • 류정민 (국립환경과학원 실내환경연구팀) ;
  • 김현욱 (가톨릭대학교 의과대학 예방의학교실) ;
  • 장성기 (국립환경과학원 실내환경연구팀)
  • Received : 2009.06.08
  • Accepted : 2009.08.17
  • Published : 2009.10.25

Abstract

We evaluated the homogeneity and accuracy of low level airborne fibrous standard, and accomplished the proper proficiency test. We had found that the correlation of concentration of standard solution and asbestos density was 0.9863~0.9968, and concluded that the proper guideline of the analysis result was ${\mid}Z{\mid}{\leq}2$ interval of Z-score.

저농도 섬유상 분진 표준시료를 제조하여 균질도와 정확성을 조사하고, 모의 숙련도 시험을 통해 최적의 숙련도 시험 방안을 평가하였다. 분석 결과 표준시료 농도와 석면밀도의 상관성이 0.9863~0.9968으로 매우 높게 나타났고, 표준시료를 이용한 모의 숙련도 시험을 통해서, 국내에서의 숙련도 시험 결과 평가 기준은 표준시료 분석결과의 Z값이 ${\mid}Z{\mid}{\leq}2$를 만족하는 것이 타당한 것으로 나타났다.

Keywords

References

  1. IARC Monographs, Sup. 7(1977)
  2. C. Ilsabe and Lois L. Niemeyer, Gerchman, Preparation of asbestos filter samples for reference standard using a wet generation technique, Am, Ind, Assoc, J. 42, 757-759(1981) https://doi.org/10.1080/15298668191420657
  3. V. Timbell and R. E. G. Rendall, Preparation of the UICC Standard reference samples of asbestos powder technology, 5, 279-287(1970) https://doi.org/10.1016/0032-5910(72)80032-9
  4. A. Skogstad, W. Eduard and P. O. Huser, A laboratory method for generation of replicate filter samples of asbestos fibers in air, AIHA J., 57, 741-745(1996) https://doi.org/10.1080/15428119691014602
  5. 이종한, 이광용, 정시정, 석면분석 정도관리용 표준 시료 개발연구, 한국산업안전공단 산업안전보건연구원 (2008)
  6. 강보영, 신용철, 백남원, 위상차 현미경법을 이용한 공기 중 석면농도 분석에서의 정도관리, 서울대학교 보건대학원, 한국위생학회지, 제 1권, 제 2호, 221-237 (1991)
  7. L. W. Ortiz and Harry J. Ettinger, Charles I. Fairchild, Calibration standard for counting asbestos, Am, Ind, Assoc, J. 36, 104-112(1975) https://doi.org/10.1080/0002889758507217
  8. 실내공기질공정시험방법, 환경부 (2004)
  9. J. Cherrie, A. Jones and A. Johnston, The Influence of Fiber Density on the Assessment of Fiber Concentration Using the Membrane Filter Method. Am. Ind. Hyg. Assoc. J., 474(1986)
  10. C. S. Paul and A. S. Stanley, Performance of asbestos fiber counting laboratories in the NIOSH proficiency analytical testing (PAT) program, am. IND. HYG. ASSOC. J., 47(5), 259-269(1986) https://doi.org/10.1080/15298668691389748