Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of Scanning Fixture for Flexible Panels

유연 판넬의 스캐닝 고정구 제작

  • Yin, Jeong-Je (Department of Mechanical Engineering Design, Induk University)
  • Received : 2010.10.29
  • Accepted : 2010.11.19
  • Published : 2010.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a scanning fixture for flexible parts such as large automotive panels is developed. For the minimization of the weight deflection of a hood outer panel, the N-2-1 fixture principle for flexible parts is adopted in the fixture design. The designed fixture for a hood outer panel is fabricated using the Alufix system. The springback of the entire hood outer panel can be measured successfully by the laser scanning with the developed fixture, which verifies the usefulness of the proposed design method for the flexible panels.

본 연구에서는 대형 차체 판넬과 같은 유연성이 큰 판넬의 3차원 형상을 스캐닝 하기 위한 고정구를 개발하였다. 유연 판넬에 대한 N-2-1 설계원리에 따라 자중의 영향이 최소화되는 지지점들을 유한요소 해석을 통하여 선정함으로써 hood outer 판넬의 고정구를 설계하고, Alufix 시스템을 이용하여 스캐닝 고정구를 제작하였다. 제작된 고정구를 이용하여 레이저 스캐닝을 수행하여 성공적으로 스프링 백을 측정함으로써, 본 연구에서 제안된 고정구 제작 방안의 유용성을 확인하였다.

Keywords

References

  1. S.S. Han, and D. J. Kim, "Application of Reverse Engineering on Sheet Metal Forming Analysis", Transactions of Material Processing, Vol. 14, No. 4, pp. 303-309, 2005. https://doi.org/10.5228/KSPP.2005.14.4.303
  2. J.C. Trappey and C.R. Liu, "A Literature Survey of Fixture-Design Automation", The International Journal of Advanced Manufacturing Technology, Vol. 5, pp. 240-255, 1990. https://doi.org/10.1007/BF02601534
  3. Y. S. Kim, Y. J. Jin, H. K. Lee and G. E. Yang, "Development of Fixture for Reducing Errors in Registration of 3D Laser Measuring System", J of the KSPE, Vol. 22, No. 10, pp. 107-113, 2005.
  4. R. J. Menassa, and W. R. DeVries, "Optimization Methods Applied to Selecting Support Positions in Fixture Design", ASME Journal of Engineering for Industry, Vol. 113, pp. 412-418, 1991.
  5. E. Jeon and Y. Shin, "Development of Jig System to Improve the Weldability of Vehicle Seat Frame", Journal of the Korea Academia-Industrial cooperation Society, Vol. 8, No. 2, pp. 173-178, 2007.
  6. Mark R. Rearick, S. Jack Hu and S. M. Wu, "Optimal Fixture Design for Deformable Sheet Metal Workpieces", Transactions of NAMRI/SME, Vol. XXI, pp. 407-412, 1993.
  7. W. Cai, S.J. Hu and I. X. Yuan, "Deformable Sheet Metal Fixturing : Principle, Algorithms, and Simulations", Transactions of ASME, Vol. 118, pp. 318-324, 1996.
  8. Wang Jian, Zhou Jiangqi and Lin Zhongqin, "Locators Optimization for Measuring Fixture Design", Chinese Journal of Mechanical Engineering, Vol. 17, No. 3, pp. 332-335, 2004. https://doi.org/10.3901/CJME.2004.03.332