Journal of the Semiconductor & Display Technology (반도체디스플레이기술학회지)

The Korean Society Of Semiconductor & Display Technology (한국반도체디스플레이기술학회)
권호 표지

Stress Analysis of the Vacuum glazing according to the Pillar shapes and Arrangements using Finite Element Method

FEM을 이용한 지지대 형상 및 배열에 따른 진공창 유리의 응력해석

  • Kim, Jae-Kyung (Graduate School of Mechanical Engineering, Kongju National University) ;
  • Jeon, Euy-Sik (Graduate School of Mechanical Engineering, Kongju National University) ;
  • Kim, Young-Shin (Graduate School of Mechanical Engineering, Kongju National University)
  • 김재경 (공주대학교 대학원 기계공학과) ;
  • 전의식 (공주대학교 대학원 기계공학과) ;
  • 김영신 (공주대학교 대학원 기계공학과)
  • Published : 2010.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Windows are still the thermally weakest part in considering energy efficiency. The vacuum glazing is considered as a new alternative in terms of energy efficiency. Vacuum glazing are consisting of two separated glass, pillars are support the under and upper glass. Therefore in this paper suggested the pillar shapes and array arrangements method using Finite Element Method and validity were proved by comparing and analyzing with the research that it is announced through the existing experiment. It is considered to solve pillar shapes and arrangement method problem of the vacuum glazing using proposed FEM analysis.

Keywords

References

  1. 박병철, 최안섭, "복층유리 격자루버시스템의 주광특성에 관한 시뮬레이션 평가", 한국조명.전기설비학회 춘계학술대회 논문집, pp. 117-120, 2009.
  2. 초단열 첨단 진공창의 설계 및 제조기반 기술 개발, 과학기술부, 1998.
  3. A. C. Fischer-Cripps, R. E. Collins, G. M. Turner, E. Bezzel, "Stresses and Fracture Probability in Evacuated Glazing", Building and Environment, vol. 30, No.1, pp. 41-59, 1995. https://doi.org/10.1016/0360-1323(94)E0032-M
  4. R. E. Collins, O Asano, M Misonou, H Katoh & S Nagasaka, "Vacuum Glazing: Design option and performance capability", Proceedings of Glass in Buildings Conference, Bath UK, pp. 221-226.
  5. Standards Association of Australia, Glass in building - selection and installation. Australian Standard AS 1288-1989, 1989.
  6. R. E. Collins and A. C. Fischer-Scripps, "Design of pillar arrays in' flat evacuated windows". Australian Journal of Physics 44, pp. 73-86, 1991.
  7. 닛폰 이타가라스 가부시키가이샤, "투광성 유리패널", 출원번호 - 10-2004-7017711.
  8. H. Weinlader, H.-P Ebert, J.Fricke, "VIG - Vacuum Insulation Glass", Bavarian Center for Applied Energy Research (ZAE Bayern), Am Hubland, D-97074 Wurzburg.
  9. Martin Tenpierik and Hans Cauberg, "Vacuum Insulation Panel: friend or foe?" PLEA2006 - The 23rd Conference on Passive and Low Energy Architecture, 2006.
  10. 이보화, 윤일섭, 송태호, 곽호상, "단열 진공유리의 제작 및 열전달계수 측정에 관한 실험적 연구", 대한기계학회 논문지, 제30권, 제8호, pp. 772-779, 2006.
  11. 정유진, 전재삼, 성우경, 김형순, "플라스마 디스플레이 패널의 격벽형성의 에칭 메커니즘", 반도체 및 디스플레이 장비학회지, 제 5권, 제 3호, pp. 33-36, 2006.