DOI QR코드

DOI QR Code

Open-slip coupled model for simulating three-dimensional bond behavior of reinforcing bars in concrete

  • Shang, Feng (State Key Laboratory of Hydro Science and Engineering, Tsinghua University) ;
  • An, Xuhui (State Key Laboratory of Hydro Science and Engineering, Tsinghua University) ;
  • Kawai, Seji (State Key Laboratory of Hydro Science and Engineering, Tsinghua University) ;
  • Mishima, Tetsuya (Maeda Corporation)
  • Received : 2009.06.15
  • Accepted : 2010.03.23
  • Published : 2010.10.25

Abstract

The bond mechanism for reinforcing bars in concrete is equivalent to the normal contact and friction between the inclined ribs and the surrounding concrete. Based on the contact density model for the computation of shear transfer across cracks, an open-slip coupled model was developed for simulating three-dimensional bond behavior for reinforcing bars in concrete. A parameter study was performed and verified by simulating pull-out experiments of extremely different boundary conditions: short bar embedment with a huge concrete cover, extremely long bar embedment with a huge concrete cover, embedded aluminum bar and short bar embedded length with an insufficient concrete cover. The bar strain effect and splitting of the concrete cover on a local bond can be explained by finite element (FE) analysis. The analysis shows that the strain effect results from a large local slip and the splitting effect of a large opening of the interface. Finally, the sensitivity of rebar geometry was also checked by FE analysis and implies that the open-slip coupled model can be extended to the case of plain bar.

Keywords

References

  1. An, X., Shawky, A.A. and Maekawa, K. (1997), "The collapse mechanism of a subway station during the Great Hanshin earthquake", Cement Concrete Compos., 19, 241-257. https://doi.org/10.1016/S0958-9465(97)00014-0
  2. Ayoub, A. and Filippou, F.C. (1999), "Mixed formulation of bond-slip problems under cyclic loads", J. Struct. Eng., 125(6), 661-671. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(661)
  3. Bazant, Z.P. and Oh, B.J. (1983), "Crack band theory for fracture of concrete", Mater. Struct., 16, 155-157.
  4. Bujadham, B. and Maekawa, K. (1992), "The universal model for stress transfer across cracks in concrete", Proceedings of JSCE, 17(451), 277-287.
  5. Bujadham, B., Maekawa, K. and Mishima, T. (1990), "Cyclic discrete crack modeling for reinforced concrete", Computer Aided Analysis and Design of Reinforced Concrete Structures, Pineridge Press, 1225-1236.
  6. Cox, J.V. and Herrmann, L.R. (1998), "Development of a plasticity bond model for steel reinforcement", Mech. Cohes.-Frict. Mater., 3, 155-180. https://doi.org/10.1002/(SICI)1099-1484(199804)3:2<155::AID-CFM45>3.0.CO;2-S
  7. Collins, M.P. and Vecchio, F. (1989), "The response of reinforced concrete to in-plane shear and normal stresses", University of Toronto, 1982.
  8. Chou, L., Niwa, J. and Okamura, H. (1983), "Bond model for deformed bars embedded in massive concrete", Proc. of 2nd JCI Colloquium on Shear Analysis of RC Structures, JCI. 42-52.
  9. Fukuura, N. and Maekawa, K. (1998), "Multi-directional crack model for in-plane reinforced concrete under reversed cyclic actions-Four-way fixed crack formulation and verification", Comput. Model. Concrete Struct., Euro-C, 143-152.
  10. Gambarova, P., Rosati, G. and Zasso, B. (1989), "Steel-to-concrete bond after concrete splitting: constitutive laws and interface deterioation", Mater. Struct., 22, 347-356. https://doi.org/10.1007/BF02472505
  11. Goto, Y. (1971), "Cracks formed in concrete around deformed tension bars", ACI J. Proceedings, 68(4), 244-251.
  12. Hawkins, N.M., Lin I.J. and Jeang, F.L. (1982), "Local bond strength of concrete for cyclic reversed loading", Bond in concrete, Applied Science Publishers, London, 151-161.
  13. Hauke, B. and Maekawa, K. (1999), "Three-dimensional modeling of reinforced concrete with multi-directional cracking", J. Mater. Concrete Struct. Pavements, JSCE, 45(634), 349-368.
  14. Jendele, L and Cervenka J. (2006), "Finite element modeling of reinforcement with bond", Comp. Struct., 84, 1780-1791. https://doi.org/10.1016/j.compstruc.2006.04.010
  15. Li, B., Maekawa, K. and Okamura, H. (1989), "Contact density model for stress transfer across crack in concrete", J. Fac. Eng, Univ. Tokyo (B), 40(1), 9-52.
  16. Lura, P., Plizzari, G.A. and Riva, P. (2002), "3D finite-element modelling of splitting crack propagation", Mag. Concrete Res., 54(6), 481-493. https://doi.org/10.1680/macr.2002.54.6.481
  17. Maekawa, K. and Okamura, H. (1983), "The deformational behavior and constitutive equation of concrete using the elasto-plastic and fracture model", J. Fac. Eng., Univ. Tokyo (B), 37(2), 253-328.
  18. Maekawa, K., Pimanmas, A. and Okamura, H. (2003), "Nonlinear mechanics of reinforced concrete", Spon Press, London.
  19. Mishima, T., Yamada, K. and Maekawa, K. (1992), "Localized deformational behavior of a crack in RC plates subjected to reversed cyclic loads", Proceedings of JSCE, 16(442), 161-170.
  20. Okamura, H. and Maekawa, K. (1991), "Nonlinear analysis and constitutive models of reinforced concrete", Gihodo Press, Tokyo.
  21. Ragueneau, F., Dominguez, N. and Ibrahimbegovic, A. (2006), "Thermodynamic-based interface model for cohesive brittle materials: application to bond slip in RC structures", Comput. Method. Appl. M., 195, 7249-7263. https://doi.org/10.1016/j.cma.2005.04.022
  22. Shima, H., Chou, L. and Okamura, H. (1987), "Micro and macro models for bond in reinforced concrete", J. Fac. Eng., Univ. Tokyo (B), 39(2), 133-194.
  23. Salem, H.S. and Maekawa, K. (2003), "Pre- and postyield finite element method simulation of bond of ribbed reinforcing bars", J. Struct. Eng., 130(4), 671-680.
  24. Tassios, T.P. and Yannopoulos, P.J. (1981), "Analytical studies on reinforced concrete members under cyclic loading based on bond stress-slip relations", ACI J., 5(6), 206-216.
  25. Teng, Z. and Zou, L. (1996), "Nonlinear Finite element analysis of RC members under reversed cyclic loading", China Civil Eng. J., 43(2), 17-29. (in Chinese)
  26. Xu, Y.L., Shen, W.D. and Wang, H. (1994), "An experimental study of bond-anchorage properties of bars in concrete", J. Build. Struct., 15(3), 27-36. (in Chinese)

Cited by

  1. Force transfer mechanism in positive moment continuity details for prestressed concrete girder bridges vol.14, pp.2, 2014, https://doi.org/10.12989/cac.2014.14.2.109
  2. Investigating the effect of bond slip on the seismic response of RC structures vol.46, pp.5, 2013, https://doi.org/10.12989/sem.2013.46.5.695
  3. Three-dimensional bond model considering the coupled damage effect for dowel action vol.69, pp.14, 2017, https://doi.org/10.1680/jmacr.16.00051
  4. Investigation of bond behavior between lightweight aggregate concrete and steel rebar using bending test vol.8, pp.4, 2011, https://doi.org/10.12989/cac.2011.8.4.465
  5. Nonlinear Bond Model for the Dowel Action considering the Fatigue Damage Effect vol.2018, pp.1687-8442, 2018, https://doi.org/10.1155/2018/9690202
  6. Three-dimensional Nonlinear Bond Model incorporating Transverse Action in Corroded RC Members vol.9, pp.1, 2011, https://doi.org/10.3151/jact.9.89