DOI QR코드

DOI QR Code

Calculation of the Reactance for a Magnetic Phase Created in a Steam Generator Tube Material

  • Ryu, Kwon-Sang (Div. of Industry Metrology, Korea Research Institute of Standards and Science) ;
  • Jung, Jae-Kap (Div. of Physical Metrology, Korea Research Institute of Standards and Science) ;
  • Son, Derac (Department of Physics, Hannam University) ;
  • Park, Duck-Gun (Nuclear Materials Technology Development Team, KAERI)
  • 투고 : 2010.02.18
  • 심사 : 2010.04.09
  • 발행 : 20100600

초록

A magnetic phase is partly produced in a steam generator tube due to stress and heat, because steam generator tubes are exposed to high temperature, high pressure and radioactivity conditions. This adversely affects the safety of steam generator tubes. However, it is difficult to detect it using conventional eddy current methods. Therefore, a new type of probe is needed to separate the signals from the defects and magnetic phases. In this study, a new U-type yoke, which contained two types of coils, a magnetizing coil and detecting coil, was designed. In addition, the signal induced by the magnetic phase and defect in an Inconel 600 plate were simulated.

키워드

참고문헌

  1. P. Xiang, et al., Int. J. Appl. Electromagnetics and Mechanics12, 151 (2000).
  2. Y. Kamada, S. Takahashi, I. G. Park, et al., The 2nd Asian Forum on Magnetics & KMS 2005 Winter Conference, 6 (2005).
  3. V. S. Cecco, Eddy Current Manual, Chalk River National Laboratories, Ontario (1983).
  4. Young H. Kim, et al., Key Engineering Materials 270-273,555 (2004). https://doi.org/10.4028/www.scientific.net/KEM.270-273.555
  5. Ansoft Corp., http://www.ansoft.com
  6. D. G. Park, K. S. Ryu, and D. Son, Trans. Kor. Nuclear Soc. Spring Meeting, Chuncheon, Korea, May 25-26 (2006).