DOI QR코드

DOI QR Code

New UWB 1:2 Power Divider with Flat In-Band Splitting and Bandpass Filtering Functions

  • Duong, Thai Hoa (The Industrial Liaison Research Institute, College of Electronics & Information, Kyunghee University) ;
  • Kim, Ihn-Seok (The Industrial Liaison Research Institute, College of Electronics & Information, Kyunghee University)
  • Received : 2009.11.27
  • Published : 2010.03.31

Abstract

This paper introduces a new U.S. ultra-wideband(UWB: 3.1~10.6 GHz) 1:2 power divider based on a single section Wilkinson type configuration. The divider provides very flat in-band power splitting, high isolation, low insertion loss, sharp roll-off bandpass filtering, and DC blocking characteristics. The circuit consists of a $\lambda$/4 Y resonator, three capacitively coupled $\lambda$/2 short-circuited lines, and a resistor between the two output ports. The circuit structure was simulated with ADS and HFSS, and realized with low-temperature co-fired ceramic(LTCC) green tape, which has a dielectric constant of 7.8. $|S_{11}|$ better than 10 dB, $|S_{21}|$ and $|S_{31}|$ less than 3.2 dB, with both $|S_{22}|$ and $|S_{32}|$ measured as better than 12 dB for the whole UWB band. Measurement results agree closely with HFSS simulation results. The power divider has a compact size of $4\times9\times0.6mm^3$.

Keywords

References

  1. "Revision of part 15 of the commission's rules regarding ultra wideband transmission system", Federal Communications Commission, 2006 [Online]. Available: http://ftp.fcc.gov/oet/info/rules/part15.
  2. S. W. Lee, C. S. Kim, K. S. Choi, J. S. Park, and D. Ahn, "A general design formula of multi-section power divider based on singly terminated filter design theory", IEEE MTT-S Int. Microwave Symp. Dig., vol. 2, pp. 1297-1300, May 2001. https://doi.org/10.1109/MWSYM.2001.967131
  3. Y. Sun, A. P. Freundorfer, "Broadband folded Wilkinson power combiner/splitter", IEEE Microwave Wireless Compon. Lett., vol. 14, no. 6, pp. 295-297, Jun. 2004. https://doi.org/10.1109/LMWC.2003.821491
  4. L. Chiu, T. Y. Yum, Q. Xue, and C. H. Chan, "A wideband compact parallel-strip 180° Wilkinson power divider for push-pull circuitries", IEEE Microwave Wireless Compon. Lett., vol. 16, no. 1, pp. 49-51, Jan. 2006. https://doi.org/10.1109/LMWC.2005.859972
  5. H. Oraizi, A.-R. Sharifi, "Design and optimization of broadband asymmetrical multisection Wilkinson", IEEE Trans. Microwave Theory Tech., vol. 54, no. 5, pp. 2220-2231, May 2006. https://doi.org/10.1109/TMTT.2006.872786
  6. M. E. Bialkowski, A. M. Abbosh, "Design of a compact UWB out-of-phase power divider", IEEE Microwave Wireless Compon. Lett., vol. 17, no. 4, pp. 289-291, Apr. 2007. https://doi.org/10.1109/LMWC.2007.892979
  7. A. M. Abbosh, "Design of ultra-wideband three-way arbitrary power dividers", IEEE Trans. Microwave Theory Tech., vol. 56, no. 1, pp. 194-201, Jan. 2008. https://doi.org/10.1109/TMTT.2007.912170
  8. S. W. Wong, L. Zhu, "Ultra-wideband power divider with good in-band splitting and isolation performances", IEEE Microwave Wireless Compon. Lett., vol. 18, no. 8, pp. 518-520, Aug. 2008. https://doi.org/10.1109/LMWC.2008.2001009
  9. G. L. Zysman, A. K. Johnson, "Coupled transmission line networks in an inhomogeneous dielectric medium", IEEE Trans. Microwave Theory Tech., vol. 17, no. 10, pp. 753-759, Oct. 1969. https://doi.org/10.1109/TMTT.1969.1127055
  10. T. H. Duong, I. S. Kim, "New elliptic function type UWB BPF based on capacitively coupled lambda/4 open T resonator", IEEE Trans. Microwave Theory Tech., vol. 57, no. 12, Dec. 2009. https://doi.org/10.1109/TMTT.2009.2033886
  11. I. S. Kim, T. H. Duong, "1:n ultra wideband power divider/combiner based on capacitively coupled n transmission lines with n shorted lines", Korean Patent, Application No. 10-2009-0046338, May 2009.
  12. I. S. Kim, T. H. Duong, "1:3 ultra wideband power divider/combiner", Korean Patent, Application No. 10-2009-0086113, Sep. 2009.
  13. D. M. Pozar, Microwave Engineering, 2nd Ed. New York, Wiley, p. 418, section 8.7, 1998.