DOI QR코드

DOI QR Code

Performance Analysis in Wireless Home Network using Bluetooth with SAW-ARQ

SAW-ARQ를 활용하여 블루투스 하에서의 무선 홈 네트워크의 성능 분석

  • Hong, Sung-Hwa (Department of Software Engineering, Dongyang Mirae University) ;
  • Kang, Bong-Jik (Department of Software Engineering, Dongyang Mirae University)
  • 홍성화 (동양미래대학 소프트웨어정보과) ;
  • 강봉직 (동양미래대학 소프트웨어정보과)
  • Received : 2009.11.10
  • Accepted : 2010.05.13
  • Published : 2010.05.31

Abstract

In this paper, we proposed the method called "DoublePico"(Double Piconet) forovercoming low data transmission rate in a scatternet. This needs a new Ad-hoc network topology to transmit with high rate. Every node performs the function of the relay station. DoublePico has two bluetooth devices that should form two different poconets; every node can make a link between two different piconets. Two different piconets are linked in one node by the link with two bluetooth divices thereby forming the Ad-Hoc network. In this paper, we shows the method of DoublePico which supports about 457kbps of the maximum data transmission rate. This method supports a higher data transmission rate than the traditional bluetooth's Ad-Hoc topology by using analysis and comparison of existing algorithm of bluetooth specification and simulation results. Specifically, this paper focuses on the impact of intererence on the PER (Packet Error Rate), throughput performance, and the throughput improvement with SAW(Stop and Wait)-ARQ scheme in DoublePico.

본 논문에서, 우리는 스캐터넷에서 저속 데이터 전송을 극복하기 위한 더블피코(Double Pico) 방안을 제서히 였다. 이는 고속 전송을 위한 새로운 애드혹 네트워크 토폴로지를 필요로 한다. 모든 노드는 릴레이 장비를 위해 기능을 동작한다. 더블 피코는 서로 다른 피코넷을 형성하는 두 블루투스 장비를 가지고 있다 모든 노드는 서로 다른 피코넷에서 링크를 만들 수 있다. 서로 다른 두 피코넷은 두 개의 블루투스 장비의 링크에의해 하나의 노드로 링크되며, 따라서 애드혹 망을 구성하게 된다. 본 논문에서는 최대 전송 속도 475kbps를 지원하는 더블 피코 방안을 제시하였다. 이 방안은 일반적인 블루투스 스펙과 시뮬레이션 결과와 비교하여 전통적인 블루투스 애드혹 토폴로지보다 보다 빠른 속도를 지원한다. 특히 본 논문에서는 PER에서의 간섭 효과, 성능 분석과 더블 피코하에서의 SAW(Stop and Wait)-ARQ 성능 향상에 초점을 두었다.

Keywords

References

  1. Telefonaktiebolaget LM Ericsson, International Business Machines Corporation, Intel Corporation, Nokia Corporation, Toshiba Corporation, "Specification of the Bluetooth system, Specification Volume 2, Core", Version 1.1b, February 2001.
  2. Telefonaktiebolaget LM Ericsson, International Business Machines Corporation, Intel Corporation, Nokia Corporation, Toshiba Corporation, "Specification of the Bluetooth system, Specification Volume 2, Profiles", Version 1.1b, February 2001.
  3. The Official Bluetooth Website, http://www.bluetooth.com
  4. Manthos Kazantzidis, "End-to-end Adaptive Multimedia over Bluetooth Scatternets", Proc. European Wireless 2002.
  5. J.Y.Khan and J.Wall, "Bluetooth-Based Wireless Personal Area Network for Multimedia Communication", Proc. IEEE Computer Society 2002.
  6. Specification of the Bluetooth System, Core, Version 1.0B, December 1999.
  7. X. Li and I. Stojmenovic. Partial Delaunay triangulation and degree-limited localized Bluetooth scatternet formation. In Proceedings of AD-HOC NetwOrks and Wireless (ADHOCNOW), Fields Institute, Toronto, Canada, Sep. 2002.
  8. C. Petrioli, S. Basagni, and I. Chlamtac. Configuring BlueStars: Multihop scatternet formation for Bluetooth networks. IEEE Transactions on Computers, special issue on Wireless Internet (Y.-B. Lin and Y.C. Tseng, eds.), 2002. in press.
  9. Chong Hooi Chia, M. Slim Beg, "Realizing MPEG-4 Video Transmission over Wireless Bluetooth Link via HCI", Proc. IEEE Transaction on Consumer Electronics, Vol.49, pp.1028-1034, Nov. 2003. https://doi.org/10.1109/TCE.2003.1261191
  10. The Website of MPEG4 Open Project Group, http://www.mpeg4ip.net