Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Die Design ＆ Manufacture for Electric motor Terminal of HEV

HEV용 전기모터 터미널 금형의 설계 및 제작에 관한 연구

  • Choi, Kye-Kwang (Kongju National University, Div. of Mechanical & Automotive Engineering) ;
  • Kim, Sei-Hwan (Kongju National University, Div. of Mechanical & Automotive Engineering) ;
  • Cho, Yun-Ho (Cimatron Korea, Ltd.)
  • 최계광 (공주대학교 기계자동차공학부) ;
  • 김세환 (공주대학교 기계자동차공학부) ;
  • 이동천 (한국씨마트론기술(주))
  • Received : 2011.10.24
  • Accepted : 2011.12.13
  • Published : 2011.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Environment-friendly vehicles using electricity vary, but electrical motor, battery, BMS, inverter, converter, etc., are the core technologies. This research paper deals with the die design and manufacture of the terminal part, one of the key parts of the electrical motor. This research sought to introduce problems such as assembly defect, correction of the R-part shape, correction of the location between holes, etc., in the process of manufacturing the electrical motor terminal die and to produce final products by correcting the problems that were tackled herein.

전기를 사용하는 친환경 자동차는 상이하지만 전기모터, 배터리, BMS, 인버터, 컨버터 등이 각기 핵심기술이다. 특히 전기모터의 주요부품 중 하나인 터미널 부품을 금형설계 및 제작하였다. 본 연구에서는 전기모터 터미널 금형의 제작과정 중 조립성 불량 수정, R부 형상 수정, 구멍과 구멍간의 위치 수정 등의 문제점을 도출, 수정, 해결하고자 하였다.

Keywords

References

  1. Moon Jaewon, An Jinwoo, "Design of 65kw Class Switched Reluctance Motor for HEV Drive ", Trans.KIEE, Vol 54, No 8, pp. 358-363, 2005.
  2. Yang Inbum, "HEV technology trends for the electronic components", KIPE, Vol 12, No 5, pp. 37-40, 2007.
  3. Lee Dongjun, Lee Yeji, Heo Eunnyeong, "A Study on the Feasibility of the Three Prospective Types of HEV", KSNRE, Vol 4, No 2, pp. 52-60, 2008.
  4. Industry Research, "The future development prospects and policy challenges in the automotive industry", KIET, pp. 31, 2007.
  5. Industry Research, The future development prospects and policy challenges in the automotive industry", KIET, pp. 36, 2007.
  6. An Jaeyoung, Heo Minho, Kang Sinyoung, Kim Kwangheon, "The Optimal Sizing and Efficient Driving Scheme of Series HEV ", KIPE, pp. 651-656, 2000.
  7. Han Seungho, Choi Bingyoon, Lee Hakju, Kwon Sungchul, "Trends at home and abroad to build electric car infrastructure", KIPE, pp. 419-430, 1999.
  8. Victor Wouk. "HYBRIDS:THEN AND NOW", IEEE SPECTRUM. pp. 16-21, 1995.
  9. Kim Sehwan, "Press die design data book illustrations", Daekwangbook, pp.1-4-1-84, 2006.
  10. Kim Sehwan, "Press die design standard", Mold Information Center Korea, pp.48-122, 1992.
  11. Kim Sehwan, An Jongmin, "Progressive die design technology",Gijeon Researcher, pp.101-145, 1995.
  12. Cimatron. Co., "Cimatron E Die Design Guide".
  13. Choi Kaekwang, Jo Yunho, "Die Design & Manufacture for Electric motor Terminal of HEV", 2010년 KAIS, pp.1169-1172, 2010.