반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

핸드폰의 형상디자인과 표면처리에 대한 연구

A Study on Surface Treatment and Configuration Design of Cellular Phone

  • 이정현 (볼보자동차) ;
  • 박재원 (서울과학기술대학교 NID 융합기술 대학원)
  • 투고 : 2011.07.12
  • 심사 : 2011.09.15
  • 발행 : 2011.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In Korea, the car mobile phone service had started in 1961 and with this Korea Mobile Telecommunications Services was established in 1984. Its service was mainly focused on the mobile phone service for the car which led the popularity of the full-scale mobile phone service. There are many kinds of materials, colors and patterns which are the elements of surface coating techniques. In light of that, we are focused on the UV coating that is ranked as an important part of the techniques in this study. In the first, the use of various materials for the cellular phone and surface processing techniques for the cellular phone were searched. On the basis of the results, the experiments of actual consumer experience with the exfoliation of the surface were done and through that we proposed the best way of processing the surface for the cellular phone and the materials. The result of the Wear Test showed that thick coating was detached more slowly and each company differed in their results with UV paints despite the same thickness of UV coating. The seal (UV) exfoliation of cellular phone is deeply related with the film thickness and the film formation when the users use the cellular phones and the exfoliation of the cellular phone surface will be decreased if the manufacturers meet the best conditions for the cellular phone.

키워드

참고문헌

  1. Ajay R. Mishra, 2000, "Fundamentals of Cellular Network Planning and Optimisation", John Wiley & Sons, Ltd
  2. Bo Goransson, Bo Hagerman, Sven Petersson, Joakim Sorelius, 2000, "Advanced Antenna Systems for WCDMA: Link and System Level Results", The 11th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, Vol. 1, pp. 62- 66,
  3. Dartevelle, C., McAlpine, E., Thompson, G. E. and Alexander, M. R., 2003, "Low Pressure Plasma Trearment for Improving the Strength and Durability of Adhesively Bonded Aluminum Joints," Surface & Coatings Technology, Vol. 173, pp. 249-258 https://doi.org/10.1016/S0257-8972(03)00427-4
  4. Kim, M. C., Yang, S. H., Boo, J. H. and Han, J. G., 2003, "Surface Treatment of Metals Using an Atmospheric Pressure Plasma Jet and Their Surface Characteristics," Surface & Coatings Technology, Vol. 174-175, pp.839-844 https://doi.org/10.1016/S0257-8972(03)00560-7
  5. Tang, S., Kwon, O. J., Lu, N. and Choi, H. S., 2005, "Surface Characteristics of AISI 304L Stainless Steel After an Atmospheric Pressure Plasma Treatment," Surface & Coatings Technology, Vol. 195, pp. 298-306. https://doi.org/10.1016/j.surfcoat.2004.07.071
  6. Critchlow, G. W., Webb, P. W., Tremlett, C. J. and Brown, K., 2000, "Chemical Conversion Coatings for Structural Adhesive Bonding of Plain Carbon Steels," International Journal of Adhesion & Adhesives, Vol. 20, pp. 113-122 https://doi.org/10.1016/S0143-7496(99)00036-6
  7. Shin, D. H., Bang, C. U., Kim, J. H., Han, K. H., Hong, Y. C., Uhm, H. S., Park, D. K. and Kim, K. H., 2007, "Modification of Metal Surfaces by Microwave Plasma at Atmospheric Pressure," Surface & Coatings Technology, Vol. 201, pp. 4939-4942. https://doi.org/10.1016/j.surfcoat.2006.07.073
  8. Noh, B. I., Seok, C. S., Moon, W. C. and Jung, S. B., 2007, "Effect of Plasma Treatment on Adhesion Characteristic at Interfaces Between Underfill and Substrate," International Journal of Adhesion & Adhesive, Vol. 27, pp. 200-206. https://doi.org/10.1016/j.ijadhadh.2006.03.005
  9. Rhee, K.Y., Yang, J. H. and Choi, N. S., 2001, "Effect of Aluminum Treatment by Plasma on the Bonding Strength Between Aluminum and CFRP Composite," Transations of the Korean Society of Mechanical Engineers A, Vol. 25, No. 12, pp. 1981-1987.6.
  10. Kagotani, and Motofumi Homma, 1998 "Barium Mtypeferrite as an electromagnetic microwave absorber in the GHz range", Journal of Materials Transctions, JIM, vol. 39, no. 10, pp. 1080-1083.
  11. A. Verma, R. G. Mendiratta, T. C. Goel, and D. C.Dube, 2002, "Microwave studies on strontium ferritebased absorbers", Journal of Electroceramics, vol.8, pp. 203-208. https://doi.org/10.1023/A:1020841915616
  12. Kagotani, and Motofumi Homma, "Barium M-type ferrite as an electromagnetic microwave absorber in the GHz range", Journal of Materials Transctions, JIM, vol. 39, no. 10, pp. 1080-1083, 1998.
  13. A. Verma, R. G. Mendiratta, T. C. Goel, and D. ㅂ C.Dube, "Microwave studies on strontium ferrite based absorbers", Journal of Electroceramics, vol. 8, pp. 203-208, 2002. https://doi.org/10.1023/A:1020841915616