DOI QR코드

DOI QR Code

Properties of artificial lightweight aggregates made from waste sludge

  • Chiou, I.J. (Graduate School of Materials Applied Technology, Department of Civil and Environmental Engineering, Nanya Institute of Technology) ;
  • Chen, C.H. (Department of Social and Regional Development, National Taipei University of Education)
  • 투고 : 2010.10.10
  • 심사 : 2011.02.14
  • 발행 : 2011.12.25

초록

In this investigation, reservoir sediment and municipal sewage sludge were sintered to form the artificial lightweight aggregates. The sintered aggregates were compared with the commercialized lightweight aggregates to in terms of potential alkali-silica reactivity and chemical stability based on analyses of their physical and chemical properties, leaching of heavy metal, alkali-silica reactivity, crystal phase species and microstructure. Experimental results demonstrated that the degree of sintering of an aggregate affected the chemical resistance more strongly than did its chemical composition. According to ASTM C289-94, all potential alkali-silica reactivity of artificial lightweight aggregates were in the harmless zone, while the potential reactivity of artificial lightweight aggregates made from reservoir sediment and municipal sewage sludge were much lower than those of traditional lightweight aggregates.

키워드

참고문헌

  1. ASTM C289-94 (2000), Standard test method for potential alkali-silica reactivity of aggregates (Chemical Method), Annual Book of ASTM Standards, Philadelphia, UAS.
  2. Chatterji, S. (2005), "Chemistry of alkali-silica reaction and testing of aggregates", Cement Concrete Compos., 27(7-8), 788-795. https://doi.org/10.1016/j.cemconcomp.2005.03.005
  3. Chiou, I.J., Wang, K.S., Chen, C.H. and Lin, Y.T. (2006), "Lightweight aggregate made from sewage sludge and incinerated ash", Waste Manage., 26(12), 1453-1461. https://doi.org/10.1016/j.wasman.2005.11.024
  4. Chu, B.L. and Yen, T. (1994), Alkali reaction of aggregate from Western Taiwan, Taiwan Area National Expressway Engineering Bureau, Taipei, Taiwan.
  5. Dolar-Mantuani, L. (1984), Handbook of concrete aggregates, Noges Publications.
  6. Ducman, V., Mladenovi, A. and Šuput, J.S. (2002), "Lightweight aggregate based on waste glass and its alkalisilica reactivity", Cement Concrete Res., 32(2), 223-226. https://doi.org/10.1016/S0008-8846(01)00663-9
  7. Gillot, J.E. (1975), "Alkali-aggregate reaction in concrete", Eng. Geology, 9, 303-326. https://doi.org/10.1016/0013-7952(75)90013-7
  8. Khandaker M. Anwar Hossain. (2009), "Influence of extreme curing conditions on compressive strength and pulse velocity of lightweight pumice concrete", Comput. Concrete, 6(6), 437-450. https://doi.org/10.12989/cac.2009.6.6.437
  9. Khouchaf, L. and Verstraete, J. (2007), "Multi-technique and multi-scale approach applied to study the structural behavior of heterogeneous materials: natural $SiO_2$ case", J. Mater. Sci., 42(7), 2455-2462. https://doi.org/10.1007/s10853-006-1239-5
  10. Leemann, A. and Lothenbach, B. (2008), "The influence of potassium-sodium ratio in cement on concrete expansion due to alkali-aggregate reaction", Cement Concrete Res., 38, 1162-1168. https://doi.org/10.1016/j.cemconres.2008.05.004
  11. Mehta, P.K. and Monteiro Paulo, J.M. (2006), Concrete: microstructure, properties, and materials, McGraw-Hill Companies, Inc. Third edition, 168-175.
  12. Mladenovic , A., Suput, J.S., Ducman, V. and Skapin, AS. (2004), "Alkali-silica reactivity of some frequently used lightweight aggregates", Cement Concrete Res., 34(10), 1809-1816. https://doi.org/10.1016/j.cemconres.2004.01.017
  13. Multon, S., Cyr, M., Sellier, A., Leklou, N. and Petit, L. (2008), "Coupled effects of aggregate size and alkali content on ASR expansion", Cement Concrete Res., 38, 350-359. https://doi.org/10.1016/j.cemconres.2007.09.013
  14. Riley, C.M. (1950), "Relation of chemical process to the bloating clay", J. Am. Ceram. Sci., 34(4), 121-128.
  15. Su, N. and Huang, C.L. (1987), "Micron structure and macron properties and concrete quality of rivers in north and central taiwan", Taiwan University of Science and Technology, Taipei, Taiwan.
  16. Swamy, R.N. (1992), The alkali-silica reaction in concrete, Van Nostrand Reinhold, New York.
  17. Wang, H.Y. (2007), Study on durability of densified high-performance lightweight aggregate concrete", Comput. Concrete, 4(6), 499-510. https://doi.org/10.12989/cac.2007.4.6.499
  18. Wang, H.Y. and Sheen Y.N. (2010), "Performance characteristics of dredged silt and high-performance lightweight aggregate concrete", Comput. Concrete, 7(1), 53-62. https://doi.org/10.12989/cac.2010.7.1.053
  19. Wang, Y.M. (1989), "Study on alkali aggregate reaction in Taiwan", National Science Council, Taipei, Taiwan.
  20. Yeinobali, A., Smadi, M. and Khedaywi, T. (2006), "Effectiveness of oil shale ash in reducing alkali-silica reaction expansions", Mater. Struct., 26(3), 159-166.
  21. Young, J.F., Mindess, S., Bentur, A. and Gray, R.J. (1999), The science and technology of civil engineering materials, Prentice Hall, 142-150.
  22. Young, S.H. (1997), "A study for potential alkali reactivity aggregates in east of taiwan", National Central University, Taipei, Taiwan.

피인용 문헌

  1. Performance of adding waste glass and sewage sludge to reservoir-sediment aggregates vol.13, pp.1, 2014, https://doi.org/10.12989/cac.2014.13.1.083
  2. Effect of sludge from oil refining industry or sludge from pomace oil extraction industry addition to clay ceramics vol.114, 2015, https://doi.org/10.1016/j.clay.2015.06.009
  3. Lightweight aggregates from waste materials: Reappraisal of expansion behavior and prediction schemes for bloating vol.127, 2016, https://doi.org/10.1016/j.conbuildmat.2016.09.111
  4. Effects of waste-glass fineness on sintering of reservoir-sediment aggregates vol.38, 2013, https://doi.org/10.1016/j.conbuildmat.2012.09.042