References
- Y. Lee, J. Jang, S. Lee and S. Oh, "Comparisons of Low Temperature Combustion Characteristics between Diesel and Biodiesel According to EGR control", Journal of ILASS-Korea, Vol. 16, No. 3, 2011, pp.119-125.
- J. W. Lee, S. Lee, J. S. Jang, "Numerical Investigation on Capture of Sub-Micron particles in Electrostatic Precipitator without Corona Discharger", Journal of ILASS-Korea, Vol. 16, No. 2, 2011, pp. 69-75.
- S. Im, T. Kim., S. Yu, "An Experimental Study on Injection and Durability Characteristics of Common- rail Injector According to mixture Ratio of Bio-die- sel", Journal of ILASS-Korea, Vol. 16, No. 1, 2011, pp. 44-55.
- I. Jo, J. Kim, J. Lee, "Analysis of Dynamic Characteristics in Two-stage Injection for CRDi Injectors Based on AMESim Environment", Journal of ILASS-Korea, Vol. 17, No. 2, 2012, pp. 57-63. https://doi.org/10.15435/JILASSKR.2012.17.2.057
- M. S. Chon, Y. H. Hwang, H. K. Suh and C. S. Lee, "Atomization and Evaporation Characteristics of DME Fuel for the Application of HCCI Diesel Engines", Journal of ILASS-Korea, Vol. 11, No. 3, 2006, pp. 140-146.
- S. Park, H. J. Kim, C. S. Lee, "A Study on the Spray, Combustion, and Exhaust Emission Characteristics of Dimethyl-ether (DME) by Experiment and Numerical Analysis", Journal of ILASS-Korea, Vol. 15, No. 1, 2010, pp.31-37.
- S. H. Bang, M. S. Chon, C. S. Lee, "An Experimental Investigation on Spray Behavior of Biodiesel and DME on Blended Ratio in High Temperature and Pres- sure Ambient Conditions", Journal of ILASS-Korea, Vol. 15, No. 1, 2010, pp.17-24.
Cited by
- A Numerical Study on the Geometry Optimization of Internal Flow Passage in the Common-rail Diesel Injector for Improving Injection Performance vol.22, pp.2, 2014, https://doi.org/10.7467/KSAE.2014.22.2.091
- Study of Computational Fluid Dynamics for Projection Distance Prediction of the Foam Monitor vol.15, pp.10, 2014, https://doi.org/10.5762/KAIS.2014.15.10.5939