DOI QR코드

DOI QR Code

Braided composite rods: Innovative fibrous materials for geotechnical applications

  • Fangueiro, Raul (Department of Civil Engineering, University of Minho) ;
  • Rana, Sohel (Department of Civil Engineering, University of Minho) ;
  • Gomes Correia, A. (Department of Civil Engineering, University of Minho)
  • 투고 : 2012.08.16
  • 심사 : 2012.12.20
  • 발행 : 2013.04.25

초록

In this paper, a novel fibrous material known as axially reinforced braided composite rods (BCRs) have been developed for reinforcement of soils. These innovative materials consist of an axial reinforcement system, comprised of longitudinally oriented core fibres, which is responsible for mechanical performance and, a braided cover, which gives a ribbed surface texture for better interfacial interactions with soils. BCRs were produced using both thermosetting (unsaturated polyester) and thermoplastic (polypropylene) matrices and synthetic (carbon, glass, HT polyethylene), as well as natural (sisal) core fibres. BCRs were characterized for tensile properties and the influence of core fibres was studied. Moreover, BCRs containing carbon fibre in the core composition were characterized for piezoresistivity and strain sensing properties under flexural deformation. According to the experimental results, the developed braided composites showed tailorable and wide range of mechanical properties, depending on the core fibres and exhibited very good strain sensing behavior.

키워드

참고문헌

  1. Bakis, C.E., Nanni, A., Terosky, J.A. and Koehler, S.W. (2001), "Self-monitoring, pseudoductile, hybrid FRP reinforcement rods for concrete applications", Compos. Sci. Technol., 61(6), 815-823. https://doi.org/10.1016/S0266-3538(00)00184-6
  2. Binici, H., Aksogan, O. and Shah, T. (2005), "Investigation of fiber reinforced mud brick as a building material", Construct. Build. Mater., 19(4), 313-318. https://doi.org/10.1016/j.conbuildmat.2004.07.013
  3. Burgoyne, C.J. (1999), "Advanced composites in civil engineering in Europe", Struct. Eng. Int., 9(4), 1-7.
  4. Fangueiro, R., Sousa, G., Araujo, M., Pereira, C.G. and Jalali, S. (2006), "Core-reinforced composite armour as a substitute for steel in concrete reinforcement," International Symposium Polymers in Concrete, ISPIC2006, Guimaraes, Portugal.
  5. Fangueiro, R., Soutinho, F., Jalali, S. and Araujo, M. (2004), "Development of braided fabrics for concrete reinforcements", The 4th World Textile Conference Autex, Czech Republic.
  6. Gonilho-Pereira, C., Jalali, S., Fangueiro, R., Araujo, M. and Marques, P. (2010), "Hybrid composite rods for concrete reinforcement", ICSA 2010 - 1st International Conference on Structures & Architecture, Guimaraes, Portugal, July.
  7. Hejazi, S.M., Sheikhzadeh, M., Abtahi, S.M. and Zadhoush, A. (2012), "A simple review of soil reinforcement by using natural and synthetic fibers", Constr. Build. Mater., 30, 100-116. https://doi.org/10.1016/j.conbuildmat.2011.11.045
  8. Miyata, K. (1996), "Walls reinforced with fiber reinforced plastic geogrids in Japan", Geosynth. Int., 3(1), 1-11. https://doi.org/10.1680/gein.3.0050
  9. Okuhara, Y. and Matsubara, H. (2006), "Memorizing maximum strain in carbon-fiber-reinforced plastic composites by measuring electrical resistance under pre-tensile load", Compos. Sci. Technol., 65(14), 2148-2155.
  10. Palmeira, E., Tatsuoka, F., Bathurst, R., Stevenson, P. and Zornberg, J. (2008), "Advances in geosynthetics materials and applications for soil reinforcement and environmental protection works", EJGE Special Volume Bouquet, 08, 38.
  11. Park, J.B., Okabe, T., Song, D.Y., Takeda, N. and Kitano, A. (2001), "In-situ health monitoring of CFRP composites using electrical characteristics", Proceedings of SPIE Smart Structures and Materials, 4328, 323-331.
  12. Prabakar, J., Dendorkar, N. and Morchhale, K. (2004), "Influence of fly ash on strength behavior of typical soils", Construct. Build. Mater., 18(4), 263-267. https://doi.org/10.1016/j.conbuildmat.2003.11.003
  13. Rosado, K. (2010), "Intelligent fibre reinforced composite rods for concrete reinforcement", Master Thesis, University of Minho, Portugal.
  14. Swanek, D.S.S. and Carey, J. (2009), "Braided composite materials for the production of lightweight, high rigidity golf shafts", Sport. Eng., 10(4), 195-208.
  15. Wang, X. and Chung, D.D.L. (1996), "Continuous carbon fibre epoxy-matrix composite as a sensor of its own strain", Smart. Mater. Struct., 5(6), 796-800. https://doi.org/10.1088/0964-1726/5/6/009
  16. Yarbasi, N., Kalkan, E. and Akbulut, S. (2007), "Modification of freezing-thawing properties of granular soils with waste additives", Col. Reg. Sci. Technol., 48(1), 44-54. https://doi.org/10.1016/j.coldregions.2006.09.009
  17. Zhou, T.H., Ruan, W.H., Yang, J.L., Rong, M.Z., Zhang, M.Q. and Zhang, Z. (2007), "A novel route for improving creep resistance of polymers using nanoparticles", Compos. Sci. Technol., 67(11-12), 2297-2302. https://doi.org/10.1016/j.compscitech.2007.01.015

피인용 문헌

  1. A review of sustainable approaches in transport infrastructure geotechnics vol.7, 2016, https://doi.org/10.1016/j.trgeo.2016.03.003
  2. Large deformation analysis of anisotropic rubber hose along cyclic path by homogenization and path interpolation methods vol.30, pp.2, 2016, https://doi.org/10.1007/s12206-016-0134-5
  3. A review on smart self-sensing composite materials for civil engineering applications vol.3, pp.2, 2016, https://doi.org/10.3934/matersci.2016.2.357
  4. Development of Hybrid Braided Composite Rods for Reinforcement and Health Monitoring of Structures vol.2014, 2014, https://doi.org/10.1155/2014/170187
  5. Development and characterization of novel auxetic structures based on re-entrant hexagon design produced from braided composites vol.93, 2016, https://doi.org/10.1016/j.compositesb.2016.02.058
  6. Development, characterization and analysis of auxetic structures from braided composites and study the influence of material and structural parameters vol.87, 2016, https://doi.org/10.1016/j.compositesa.2016.04.020