DOI QR코드

DOI QR Code

Horizontal pullout capacity of a group of two vertical plate anchors in clay

  • Bhattacharya, Paramita (Civil Engineering Dept., Indian Institute of Technology Kharagpur) ;
  • Kumar, Jyant (Civil Engineering Dept., Indian Institute of Science Bangalore)
  • 투고 : 2013.01.01
  • 심사 : 2013.03.28
  • 발행 : 2013.08.25

초록

The horizontal pullout capacity of a group of two vertical strip plate anchors, placed along the same vertical plane, in a fully cohesive soil has been computed by using the lower bound finite element limit analysis. The effect of spacing between the plate anchors on the magnitude of total group failure load ($P_{uT}$) has been evaluated. An increase of soil cohesion with depth has also been incorporated in the analysis. For a weightless medium, the total pullout resistance of the group becomes maximum corresponding to a certain optimum spacing between the anchor plates which has been found to vary generally between 0.5B and B; where B is the width of the anchor plate. As compared to a single plate anchor, the increase in the pullout resistance for a group of two anchors becomes greater at a higher embedment ratio. The effect of soil unit weight has also been analyzed. It is noted that the interference effect on the pullout resistance increases further with an increase in the unit weight of soil mass.

키워드

참고문헌

  1. Bishop, A.W. (1966), "The strength of soils as engineering materials", Geotechnique, 16(2), 91-218. https://doi.org/10.1680/geot.1966.16.2.91
  2. Bottero, A., Negre, R., Pastor, J. and Turgeman, S. (1980), "Finite element method and limit analysis theory for soil mechanics problem", Comput. Methods. Appl. Mech. Eng., 22(1), 131-149. https://doi.org/10.1016/0045-7825(80)90055-9
  3. Das, B.M., Moreno, R. and Dallo, K.F. (1985), "Ultimate pullout capacity of shallow vertical anchors in clay", Soils Found., 25(2), 148-152. https://doi.org/10.3208/sandf1972.25.2_148
  4. Dickin, E.A. and Leung, C.F. (1983), "Centrifugal model tests on vertical anchor plates", J. Geotech. Eng., ASCE, 109(12), 1503-1515. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:12(1503)
  5. Ei Sawwaf, M.E. and Nazir, A. (2006), "The effect of soil reinforcement on pullout resistance of an existing vertical anchor plate in sand", Comput. Geotech., 33(3), 167-176. https://doi.org/10.1016/j.compgeo.2006.04.001
  6. Kumar, J. and Khatri, V.N. (2008a), "Effect of footing width on bearing capacity factor $N\gamma$ for smooth strip footings", J. Geotech. Geoenviron. Eng., ASCE, 134(9), 1299-1310. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:9(1299)
  7. Kumar, J. and Khatri, V.N. (2008b), "Effect of footing width $N_{\gamma}$", Can. Geotech. J., 45(12), 1673-1684. https://doi.org/10.1139/T08-113
  8. Merifield, R.S. and Sloan, S.W. (2006), "The ultimate pullout capacity of anchors in frictional soil", Can. Geotech. J., 43(8), 852-868. https://doi.org/10.1139/t06-052
  9. Merifield, R.S., Lyamin, A.V., Sloan, S.W. and Yu, H.S. (2003), "Three dimensional lower bound solutions for stability of plate anchors in clays", J. Geotech. Geoenviron. Eng., ASCE, 129(3), 243-253. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:3(243)
  10. Merifield, R.S., Sloan, S.W. and Yu, H.S. (2001), "Stability of plate anchors in undrained clays", Geotechnique, 51(2), 141-153. https://doi.org/10.1680/geot.2001.51.2.141
  11. Meyerhof, G.G. (1973), "Uplift resistance of inclined anchors and piles", Proeeding of 8th International Conference on Soil Mechanics and Foundation Engineering, Moscow, 2, 167-172.
  12. Rowe, R.K. and Davis, E.H. (1982), "The behaviour of anchor plates in clay", Geotechnique, 32(1), 9-23. https://doi.org/10.1680/geot.1982.32.1.9
  13. Sahoo, J.P. and Kumar, J. (2012), "Horizontal pullout resistance for a group of vertical plate anchors in clays", Geotech. Geol. Eng., 30(5), 1279-1287. https://doi.org/10.1007/s10706-012-9537-y
  14. Sloan, S.W. (1988), "Lower bound limit analysis using finite elements and linear programming", Int'l J. Num. Anal. Methods Geomech., 12(1), 61-77. https://doi.org/10.1002/nag.1610120105
  15. Yu, L., Liu, J., Kong, X.J. and Hu, Y. (2009), "Three-dimensional numerical analysis of the keying of the vertically installed plate anchors in clay", Comput. Geotech., 36(4), 558-567. https://doi.org/10.1016/j.compgeo.2008.10.008

피인용 문헌

  1. Square plates as symmetrical anchor plates under uplift test in loose sand vol.6, pp.6, 2014, https://doi.org/10.12989/gae.2014.6.6.593
  2. Experimental investigation of the uplift capacity of group anchor plates embedded in sand vol.11, pp.5, 2016, https://doi.org/10.12989/gae.2016.11.5.691
  3. Experimental and numerical investigation of uplift behavior of umbrella-shaped ground anchor vol.7, pp.2, 2014, https://doi.org/10.12989/gae.2014.7.2.165
  4. Response of square anchor plates embedded in reinforced soft clay subjected to cyclic loading vol.17, pp.2, 2013, https://doi.org/10.12989/gae.2019.17.2.165