References
- Bao, T.Y. and Qiu, W.J. (1995), Interior Ballistic, Beijing Institute of Technology Press, Beijing.
- Borvik, T., Hanssen, A.G., Langseth, M. and Olovsson, L. (2009), "Response of stuctures to planar blast loads - A finite element engineering approach", Comput. Struct., 87(9-10), 507-520. https://doi.org/10.1016/j.compstruc.2009.02.005
- Cordebois, J.P. and Sidoroff, F. (1982), "Endommagement anisotropic", J. Theor. App. Mech., 1(4), 45-60.
- Chow, C.L. and Wang, J. (1988), "A finite element analysis of continuum damage mechanics for ductile fracture", Int. J. Fracture, 38, 83-102.
- Feldgun, V.R., Karinski, Y.S. and Yankelevsky, D.Z. (2011), "A simplified model with lumped parameters for explosion venting simulation", Int. J. Impact Eng., 38(12), 964-975. https://doi.org/10.1016/j.ijimpeng.2011.08.004
- Parisi, F. and Augenti, N. (2012), "Influence of seismic design criteria on blast resistance of RC framed buildings: A case study", Eng. Struct., 44, 78-93. https://doi.org/10.1016/j.engstruct.2012.05.046
- Pandey, A.K. (2010), "Damage prediction of RC containment shell under impact and blast loading", Struct. Eng. Mech. Int. J., 36(6), 729-744. https://doi.org/10.12989/sem.2010.36.6.729
- Fahrenthold, E.P. (1991), "A continuum damage model for fracture of brittle solids under dynamic loading", J. Appl. Mech.-T., ASME, 58, 904-909.
- Giacomini, A., Thoeni, K., Lambert, C., Booth, S. and Sloan, S.W. (2012), "Experimental study on rockfall drapery systems for open pit highwalls", Int. J. Rock Mech. Min., 56,171-181.
- Hussein, A.T. (2010), "Non-linear analysis of SDOF system under blast load", Eur. J. Sci. Res., 45(3), 430-437.
- Kachanov, L.M. (1986), Introduction to continuum damage mechanics, Martinus Nijhoff Publishers, Brookline MA02146, USA.
- Khandelwal, M. (2010), "Evaluation and prediction of blast-induced ground vibration using support vector machine", Int. J. Rock Mech. Min., 47(3), 509-516. https://doi.org/10.1016/j.ijrmms.2010.01.007
- Liu, Y.Q., Li, H.B. and Li, J.R. (2004), "UDEC simulation on dynamic response of rock slope of huangmailing phosphorite mine under explosion", Chin. J. Rock Mech. Eng., 23(21), 3659-3663.
- Ma, G.W., Huang, X. and Li, J.C. (2009), "Damage assessment for buried structures against internal blast load", Struct. Eng. Mech., An Int. J., 32(2), 301-320. https://doi.org/10.12989/sem.2009.32.2.301
- Ngo, T., Mendis, P., Gupta, A. and Ramsay, J. (2007), "Blast loading and blast effects on structures-an overview", EJSE Special Issue: Loading on Structures, 76-91.
- Nayak, G. and Zienkiewicz, O.C. (1972), "Convenient form of stress invariants for plasticity", J. Struct. Div. ASCE, 949-953.
- Nor, H. and Abdul, H. (2010), "A concept development and proposed design procedure for rocking precast hollow core wall in warehouse", J. Inst.Eng., 71(2), 18-26.
- Shihada, S.M. and Jerjawy, M.A. (2011), "Assessment and strengthening of a sixteen storey RC building damaged by air attack", The Islamic University Journal (Series of Natural Studies and Engineering), 19(2), 37-56.
- Sanada, H., Nakamura, T. and Sugita, Y. (2012), "Mine-by experiment in a deep shaft in Neogene sedimentary rocks at Horonobe, Japan", Int. J. Rock Mech. Min., 56, 127-135.
- Sevim, B., Altunisik, A.C., Bayraktar, A., Akkose, M. and Adanur, S. (2012), "Estimation of elasticity modulus of a prototype arch dam using experimental methods", J. Mater. Civil Eng., ASCE, 24(4), 321-329. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000361
- Sevim, B., Altunisik, A.C. and Bayraktar, A. (2012), "Experimental evaluation of crack effects on the dynamic characteristics of a prototype arch dam using ambient vibration tests", Comput. Concrete, An Int. J., 10(3), 277-294. https://doi.org/10.12989/cac.2012.10.3.277
- Valliappan, S., Zhang, W.H. and Murti, V. (1990), "Finite element analysis of anisotropic damage mechanics problems", Eng. Fract. Mech., 35, 1061-1071. https://doi.org/10.1016/0013-7944(90)90134-3
- Vijayaraghavan, C., Thirumalaivasan, D. and Venkatesan, R. (2012), "A study on nuclear blast overpressure on buildings and other infrastructures using geospatial technology", J. Comput. Sci., 8(9), 1520-1530. https://doi.org/10.3844/jcssp.2012.1520.1530
- Vestroni, F. and Capecchi, D. (1996), "Damage evaluation in vibrating beams using experimental frequencies and finite element models", J. Vib. Control, 2, 69-86. https://doi.org/10.1177/107754639600200105
- Wang, S.S., Ren, Q.W. and Qiao, P.Z. (2006), "Structural damage detection using local damage factor", J. Vib. Control, 12, 955-973. https://doi.org/10.1177/1077546306068286
- Xia, X., Li, H.B. and Li, J.R. (1987) "Numerical simulation of blast-induced cracks in rock", Rock Soil Mech., 27(11),1987-1991.
- Zhang, L. (2008), "The research of crack extending in rock under blast loading", J. Huinan Vocational Tech. College, 8(1),15-16.
- Zhu, C.Y., Lu, W.B. and Dong, Z.H. (1997), "Summary of control standard for rock slope under blasting vibration", Blasting, 14(4), 13-17.
- Zhang, W.H., Chen, Y.M. and Jin, Y. (2000), "A Study of Dynamic Responses of Incorporating Damage Materials and Structure", Struct. Eng. Mech., Int. J., 12(2), 139-156.
- Zhang, W.H. (1992), "Numerical Analysis of Continuum Damage Mechanics", Ph.D. Thesis, University of New South Wales, Australia.
- Zhang, W.H. and Valliappan, S.(1998), "Continuum damage mechanics theory and application-part I: theory; part II-application", Int. J. Damage Mech.,7, 250-273. https://doi.org/10.1177/105678959800700303
Cited by
- Blasting Response of a Two-Storey RC Building Under Different Charge Weight of TNT Explosives vol.44, pp.2, 2013, https://doi.org/10.1007/s40996-019-00256-0