DOI QR코드

DOI QR Code

Improvement of tip analysis model for drilled shafts in cohesionless soils

  • Chen, Yit-Jin (Department of Civil Engineering, Chung Yuan Christian University) ;
  • Wu, Hao-Wei (Department of Civil Engineering, Chung Yuan Christian University) ;
  • Marcos, Maria Cecilia M. (Department of Civil Engineering, Chung Yuan Christian University) ;
  • Lin, Shiu-Shin (Department of Civil Engineering, Chung Yuan Christian University)
  • 투고 : 2012.09.24
  • 심사 : 2013.05.18
  • 발행 : 2013.10.25

초록

An analysis model for predicting the tip bearing capacity of drilled shafts in cohesionless soils is improved in this study. The evaluation is based on large amounts of drilled shaft load test data. Assessment on the analysis model reveals a greater variation in two coefficients, namely, the overburden bearing capacity factor ($N_q$) and the bearing capacity modifier for soil rigidity (${\zeta}_{qr}$). These factors are modified from the back analysis of drilled shaft load test results. Different effective shaft depths and interpreted capacities at various loading stages (i.e., low, middle, and high) are adopted for the back calculation. Results show that the modified bearing capacity coefficients maintain their basic relationship with soil effective friction angle ($\bar{\phi}$), in which the $N_q$ increases and ${\zeta}_{qr}$ decreases as $\bar{\phi}$ increases. The suggested effective shaft depth is limited to 15B (B = shaft diameter) for the evaluation of effective overburden pressure. Specific design recommendations for the tip bearing capacity analysis of drilled shafts in cohesionless soils are given for engineering practice.

키워드

참고문헌

  1. Cai, G., Liu, S. and Puppala, A.J. (2012), "Reliability assessment of CPTU-based pile capacity predictions in soft clay deposits", Eng. Geo., 141-142, 84-91. https://doi.org/10.1016/j.enggeo.2012.05.006
  2. Cai, G., Liu, S., Tong, L. and Du, G. (2009), "Assessment of direct CPT and CPTU methods for predicting the ultimate bearing capacity of single piles", Eng. Geo., 104(3-4), 211-222. https://doi.org/10.1016/j.enggeo.2008.10.010
  3. Chen, C.H. (2010), "Evaluation of compression behavior for digging construction pre-bored PC piles in drained soils", Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan.
  4. Chen, Y.J. and Chu, T.H. (2012), "Evaluation of uplift interpretation criteria for drilled shafts in gravelly soils", Can. Geotech. J., 49(1), 70-77. https://doi.org/10.1139/t11-080
  5. Chen, Y.J. and Fang, Y.C. (2009), "Critical evaluation of compression interpretation criteria for drilled shafts", J. Geotech. Geoenviron. Eng., 135(8), 1056-1069. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000027
  6. Chen, Y.J. and Kulhawy, F.H. (1994), "Case history evaluation of drilled shaft behavior", Rpt TR-104601, Electric Power Research Institute, Palo Alto.
  7. Chen, Y.J., Chang, H.W. and Kulhawy, F.H. (2008), "Evaluation of uplift interpretation criteria for drilled shaft capacity", J. Geotech. Geoenviron. Eng., 134(10), 1459-1468. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:10(1459)
  8. Chen, Y.J., Fang, Y.C. and Chu, T.H. (2009), "Evaluation of compression tip capacity for drilled shafts", Proceedings of International Foundation Congress and Equipment Expo, Orlando, Florida, March.
  9. Chen, Y.J., Lin, S.S., Chang, H.W. and Marcos, M.C. (2011), "Evaluation of side resistance capacity for drilled shafts", J. Marine Sci. Tech., 19(2), 210-221.
  10. Chin, F.K. (1970), "Estimation of the ultimate load of piles not carried to failure", Proceedings of 2nd Southeast Asian Conference on Soil Engineering, Singapore, June.
  11. Ching, J. and Chen, J.R. (2010), "Predicting displacement of augered cast-in-place piles based on load test database", Struct. Saf., 32(6), 372-383. https://doi.org/10.1016/j.strusafe.2010.04.007
  12. Chu, T.H. (2009), "Evaluation of interpretation criteria and capacity for drilled shafts in gravelly soils under axial and lateral loading", Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan.
  13. Das, B.M. (2010), Principles of Foundation Engineering, (7th Edition), Cengage Learning.
  14. Department of the Navy, Naval Facilities Engineering Command (NAVFAC) (1982), Foundation and Earth Structure, Design Manual 7.2".
  15. Fang, Y.C. (2007), "Evaluation of tip resistance and compression interpretation criteria for drilled shafts", Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan.
  16. Hansen, J.B. (1970), "A revised and extended formula for bearing capacity", Bull. 28, Danish Geotechnical Institute, Copenhagen, 5-11.
  17. Hirany, A. and Kulhawy, F.H. (1988), "Conduct and interpretation of load tests on drilled shaft foundations", Detailed Guidelines, Rpt EL-5915(1), Electric Power Research Institute, Palo Alto.
  18. Hirany, A. and Kulhawy, F.H. (2002), "On the interpretation of drilled foundation load test results", Proceedings of International Deep Foundations Congress, Orlando, Florida, February.
  19. Kulhawy, F.H. (1991), "Drilled Shaft Foundations", Chapter 14: in Foundation Engineering Handbook (2nd Edition), Van Nostrand Reinhold, N.Y.
  20. Kulhawy, F.H. and Mayne, P.W. (1990), "Manual on estimating soil properties for foundation design", Report EL-6800, EPRI, Palo Alto.
  21. Kulhawy, F.H., Trautmann, H.C., Beech, J.F., O'Rourke, T.D., McGuire, W., Wood, W.A. and Capano, C. (1983), "Transmission line structure foundations for uplift-compression loading", Rpt EL-2870, EPRI, Palo Alto.
  22. Marcos, M.C., Chen, C.H. and Chen, Y.J. (2011), "Evaluation of axial capacity of pre-bored PC piles in drained soils", J. Adv. Eng., 6(4), 321-326.
  23. Schneider, J., Xu, X. and Lehane, B.M. (2008), "Database assessment of CPT-based design methods for axial capacity of driven piles in siliceous sands", J. Geotech. Geoenviron. Eng., 134(9), 1227-1244. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:9(1227)
  24. Vesic, A.S. (1963), "Bearing capacity of deep foundation in sand", Highway Research Board Record, No. 39, 112-153.
  25. Vesic, A.S. (1975), "Bearing capacity of shallow foundation", Chapter 3: in Foundation Engineering Handbook, Van Nostrand Reinhold, N.Y.
  26. Zhang, L.M., Shek, L.M.P., Pang, H.W. and Pang C.F. (2006), "Knowledge-based design and construction of driven piles", Proceedings of the Institution of Civil Engineers: Geotech. Eng., 159(3), 177-185. https://doi.org/10.1680/geng.2006.159.3.177

피인용 문헌

  1. Development of an integrated Web-based system with a pile load test database and pre-analyzed data vol.7, pp.1, 2014, https://doi.org/10.12989/gae.2014.7.1.037
  2. Experimental evaluation of the active tension bolt vol.11, pp.2, 2016, https://doi.org/10.12989/gae.2016.11.2.177