DOI QR코드

DOI QR Code

Experimental and numerical studies of the flow around the Ahmed body

  • Tunay, Tural (Department of Mechanical Engineering, Cukurova University) ;
  • Sahin, Besir (Department of Mechanical Engineering, Cukurova University) ;
  • Akilli, Huseyin (Department of Mechanical Engineering, Cukurova University)
  • 투고 : 2012.09.24
  • 심사 : 2013.07.11
  • 발행 : 2013.11.25

초록

The present study aims to investigate characteristics of the flow structures around the Ahmed body by using both experimental and numerical methods. Therefore, 1/4 scale Ahmed body having $25^{\circ}$ slant angle was employed. The Reynolds number based on the body height, H and the free stream velocity, U was $Re_H=1.48{\times}10^4$. Investigations were conducted in two parts. In the first part of the study, Large Eddy Simulation (LES) method was used to resolve the flow structures around the Ahmed body, numerically. In the second part of the study the particle image velocimetry (PIV) technique was used to measure instantaneous velocity fields around the Ahmed body. Time-averaged and instantaneous velocity vectors maps, streamline topology and vorticity contours of the flow fields were presented and discussed in details. Comparison of the mean and turbulent quantities of the LES results and the PIV results with the results of Lienhart et al. (2000) at different locations over the slanted surface and in the wake region of the Ahmed body were also given. Flow features such as critical points and recirculation zones in the wake region downstream of the Ahmed body were well captured. The spectra of numerically and experimentally obtained stream-wise and vertical velocity fluctuations were presented and they show good consistency with the numerical result of Minguez et al. (2008).

키워드

참고문헌

  1. Ahmed, S.R., Ramm, G. and Faltin, G. (1984), Some salient features of the time-averaged ground vehicle wake, SAE Technical Paper.
  2. Aider J.L., Beaudoin J.F. and Wesfreid J.E. (2010), "Drag and lift reduction of a 3D bluff-body using active vortex generators", Exp. Fluids, 48(5), 771-789. https://doi.org/10.1007/s00348-009-0770-y
  3. Barlow, J., Guterres, R., Ranzenbach, R. and Williams, J. (1999), Wake structures of rectangular bodies with radiused edges near a plane surface, SAE Paper.
  4. Barlow, J.B., Guterres, R., and Ranzenbach, R. (1999), Rectangular bodies with radiused edges in ground effect, AIAA Paper No. 99-3153.
  5. Beaudoin, J.F. and Aider, J.L. (2008), "Drag and lift reduction of a 3D bluff body using flaps", Exp. Fluids, 44(4), 491-501. https://doi.org/10.1007/s00348-007-0392-1
  6. Beaudoin, J.F., Cadot, O., Aider, J.L., Gosse, K., Paranthoen, P., Hamelin, B., Tissier, M., Allano, D., Mutabazi, I., Gonzales, M. and Wesfreid, J.E. (2004), "Cavitation as a complementary tool for automotive aerodynamics", Exp. Fluids, 37(5), 763-768. https://doi.org/10.1007/s00348-004-0879-y
  7. Bernard, P.S., Collins, P. and Potts, M. (2005), Vortex method simulation of ground vehicle aerodynamics, SAE Technical papers.
  8. Cooper, K. R. (1985), The effect of front-edge rounding and rear edge shaping on the aerodynamic drag of bluff vehicles in ground proximity, SAE Paper.
  9. Fares, E. (2006), "Unsteady flow simulation of the Ahmed reference body using a lattice boltzmann approach", Comput. Fluids, 35(8-9), 940-950. https://doi.org/10.1016/j.compfluid.2005.04.011
  10. Gillieron, P. and Chometon, F. (1999), "Modelling of stationary three-dimensional separated air flows around an Ahmed reference model", Proceedings of the 3rd International Workshop on Vortex ESAIM.
  11. Guilmineau, E. (2008), "Computational study of flow around a simplified car body", J. Wind Eng. Ind. Aerod., 96(6-7), 1207-1217. https://doi.org/10.1016/j.jweia.2007.06.041
  12. Gurlek, C., Sahin, B., Ozalp, C. and Akilli, H. (2008), "Flow structures around a three-dimensional rectangular body with ground effect", Wind Struct., 11(5), 345-359. https://doi.org/10.12989/was.2008.11.5.345
  13. Gurlek C., Sahin B. and Ozkan G.M. (2012), "PIV studies around a bus model", Exp. Therm. Fluid Sci., 38, 115-126. https://doi.org/10.1016/j.expthermflusci.2011.11.014
  14. Han, T. (1989), "Computational analysis of three-dimensional turbulent flow around a bluff body in ground proximity", AIAA J., 27(9), 1213-1219. https://doi.org/10.2514/3.10248
  15. Hinterberger, C., Garcia-Villalba, M. and Rodi W. (2004), Large eddy simulation of flow around the Ahmed body, The aerodynamics of heavy vehicles: trucks, buses and trains, Lecture Notes in Applied and Computational Mechanics, Springer, Berlin.
  16. Howard, R.J.A. and Pourquie, M. (2002), "Large eddy simulation of an Ahmed reference model", J. Turbul., 3.
  17. Hucho, W.H. and Sovran, G. (1993), "Aerodynamics of road vehicles", Annu. Rev. Fluid Mech., 25, 485-537. https://doi.org/10.1146/annurev.fl.25.010193.002413
  18. Kapadia, S., Roy, S., Vallero, M., Wurtzler, K. and Forsythe, J. (2003), "Detached-eddy simulation over a reference Ahmed car model", Proceedings of the Direct and Large-Eddy Simulation-V, Garching, Germany, 27-29 August.
  19. Kapadia, S., Roy, S. and Wurtzler, K. (2003), "Detached eddy simulation over a reference Ahmed car model", Proceedings of the 41st Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 6-9 January.
  20. Krajnovic, S. and Davidson, L. (2004), "Large eddy simulation of the flow around an Ahmed body", Proceedings of the HTFED04, ASME Heat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, USA.
  21. Krajnovic, S. and Davidson, L. (2004), "Large-eddy simulation of the flow around simplified car model", Proceedings of the SAE World Congress, SAE Paper No. 2004-01-0227, Detroit, USA.
  22. Krajnovic, S. and Davidson, L. (2005), "Flow around a simplified car, Part 1: large eddy simulation", J. Fluid. Eng. - T. ASME, 127(5), 907-918. https://doi.org/10.1115/1.1989371
  23. Krajnovic, S. and Davidson, L. (2005), "Flow around a simplified car, Part 2: understanding the flow", J. Fluid. Eng. - T. ASME, 127(5), 919-928. https://doi.org/10.1115/1.1989372
  24. Krajnovic, S. and Davidson, L. (2005), "Influence of floor motions in wind tunnels on the aerodynamics of road vehicles", J. Wind Eng. Ind. Aerod., 93, 677-696. https://doi.org/10.1016/j.jweia.2005.05.002
  25. Lehmkuhl, O., Borrell, R., Rodriguez, I., Perez-Segarra, C.D. and Oliva, A. (2012), "Assessment of the symmetry-preserving regularization model on complex flows using unstructured grids", Comput. Fluids, 60, 108-116. https://doi.org/10.1016/j.compfluid.2012.02.030
  26. Lienhart, H., Stoots, C. and Becker, S. (2000), "Flow and turbulence structures in the wake of a simplified car model (Ahmed model)", Proceedings of the DGLR Fach. Symp. der AG STAB DGLR Fach. Symp. der AG STAB, Stuttgart University.
  27. Makowski, F.T. and Kim, S.E. (2000), Advances in external-aero simulation of ground vehicles using the steady RANS equations, SAE Technical Paper Series, World Congress Detroit, Michigan, 6-9 March.
  28. Minguez, M., Pasquetti, R. and Serre, E. (2008), "High-order large-eddy simulation of flow over the "Ahmed body" car model", Phys. Fluids, 20(9), 095101. https://doi.org/10.1063/1.2952595
  29. Robinson, C.M.E. (2001), Advanced CFD modelling of road-vehicle aerodynamics, PhD thesis, Institute of Science and Technology of University of Manchester.
  30. Sharma, R., Chadwick, D. and Haines, J. (2008), "Aerodynamics of an intercity bus", Wind Struct., 11(4), 257-273. https://doi.org/10.12989/was.2008.11.4.257
  31. Spohn, A. and Gillieron, P. (2002), "Flow separations generated by a simplified geometry of an automotive vehicle", Proceedings of the IUTAM Symposium: Unsteady Separated Flows, Toulouse, France, April 8-12.
  32. Strachan, R., Knowles, K. and Lawson, N. (2005), "Comparisons between CFD and experimental results for a simplified car model in wall proximity", Proceedings of the Integrating CFD and Experiments in Aerodynamics, 5-6 September.
  33. Strachan, R., Knowles, K. and Lawson, N. (2007), "The vortex structure behind an Ahmed reference model in the presence of a moving ground plane", Exp. Fluids, 42(5), 659-669. https://doi.org/10.1007/s00348-007-0270-x
  34. Vino, G., Watkins, S., Mousley, P., Watmuff, J. and Prasad, S. (2004), "The unsteady near-wake of a simplified passenger car", Proceedings of the 15th Australasian Fluid Mechanics Conference, Sydney, Australia.
  35. Vino, G., Watkins, S., Mousley, P., Watmuff, J. and Prasad, S. (2005), "Flow structures in the near-wake of the Ahmed model", J. Fluid. Struct., 20(5), 673-695. https://doi.org/10.1016/j.jfluidstructs.2005.03.006
  36. Wang X.W., Zhou Y., Pin Y.F. and Chan T.L. (2013), "Turbulent near wake of an Ahmed vehicle model", Exp. Fluids, 54, 1490-1509. https://doi.org/10.1007/s00348-013-1490-x

피인용 문헌

  1. Computational and experimental investigations of the vortical flow structures in the near wake region downstream of the Ahmed vehicle model vol.159, 2016, https://doi.org/10.1016/j.jweia.2016.10.006
  2. A combination method to generate fluctuating boundary conditions for large eddy simulation vol.20, pp.4, 2015, https://doi.org/10.12989/was.2015.20.4.579
  3. Investigation of vehicle ride height and diffuser ramp angle on downforce and efficiency pp.2041-2991, 2018, https://doi.org/10.1177/0954407018776767
  4. Wake Flow Investigation on Notchback MIRA Model by PIV Experiments vol.14, pp.15, 2013, https://doi.org/10.3390/en14154568