DOI QR코드

DOI QR Code

W/B 및 레드머드 치환율에 따른 고로슬래그 기반 무시멘트 경화체의 강도 및 반응특성에 관한 연구

Study on the Strength and Reaction Properties of Blast Furnace Slag based Non-Cement Matrix according to W/B Ratios and Replacement of Red Mud

  • 박선규 (목원대학교 공과대학 건축학부) ;
  • 김윤미 (한밭대학교 건설환경조형대학 건축공학과) ;
  • 이상수 (한밭대학교 건설환경조형대학 건축공학과)
  • 투고 : 2014.02.26
  • 심사 : 2014.05.08
  • 발행 : 2014.05.30

초록

Cement is an important construction materials in the world. However, cement industry the emit carbon dioxide($CO_2$) which is a byproduct of a chemical conversion process used in the production of clinker into the atmosphere. Also, carbon dioxide is also emitted during cement production by fossil fuel combustion. There has been a lot of research in order to protect the global environment and to reduce the consumption of cement. This experimental study is purposed to analyze the effect of alkali activator on strength development in order to develop non portland cement concrete using waste resources(paper sludge ash, blast furnace slag and red mud). Various specimens were prepared with water binder ratios and replacement of red mud of alkali activator. The physical properties of these specimens were then investigated by compressive strength and flexural test, energy dispersive spectroscopy(EDS) and observation of micro-structures using scanning electron microscope(SEM). As a results, we find that compressive flexural strength increased with the addition ratios of red mud, but those strengths decreased reversely when addition ratio of some alkali activator were higher. In the EDS of matrix, the calcium hydroxide was possible to quantitative analysis in accordance with water binder ratios and replacement of red mud of alkali activator respectively. The observation result of SEM image, it was shown calcium hydroxide, C-S-H gel etc.. It was judged that results of hydrate analysis of non potland cement matrix binder with kind of water binder ratios and replacement of red mud of alkali activator were useful to basic data for mixtures design and evaluation properties of non portland cement matrix concrete.

키워드

참고문헌

  1. 지식경제부, 에너지 산업부문 제계적 온실가스 감축 이행기반 구축, 2011
  2. 이지환, 저탄소 녹색성장을 위한 우리나라 산업부문 온실가스 배출 현황 및 전망, 계명대학교 석사학위논문, p.p.5-25, 2010
  3. 이상수, 알칼리 자극제를 사용한 무시멘트계 친환경 무기복합체의 유동특성 및 강도특성 연구, 대한건축학회지, 제 26권 제 5호, 2010
  4. 이승형, 김원기, 강석화, 고로(수쇄)슬래그의 수화반응 메커니즘, 한국콘크리트학회지, 제 24권 제 6호, 2012
  5. 이강진, 고로슬래그 미분말 제조 및 활용 현황, 대한건축학회지, 제 56권 제 8호, 2012
  6. 김윤미, 박선규, 이상수, 송하영, 알칼리 자극제 및 고로슬래그를 사용한 무시멘트 경화체의 반응 특성에 관한 연구, 대한건축학회 학술발표대회 논문집, 제 33권, 제 1호, 2013
  7. 이윤성, 이강필, 이상수, 송하영, 고로슬래그와 레드머드를 사용한 무시멘트계 복합체의 유동 및 강도특성에 관한 연구, 한국건축시공학회 학술.기술논문발표회, 2010
  8. Fernando Pacheco-Torgal, Joa.o Castro-Gomes, Said Jalali, Alkali-activated binders-A review Part 1-Historical backgra ound, terminology, reaction mecanisms and hydration products, Construction and Building Materials, 2008
  9. 이영원, 문경주, 강석표, 레드머드를 활용한 비소성 무기결합 재콘크리트의 공학적 특성에 관한 연구, 콘크리트학회논문집, 제 25권 제 1호, 2013
  10. 김해종, 레드머드의 화학적 특성과 적용에 관한 연구, 전남대학교 석사학위논문, p.p.3-11. 2007
  11. 박선규, 권성준, 김윤미, 이상수, 고로슬래그 미분말을 사용한 무시멘트 경화체의 반응 특성, 한국콘텐츠학회논문지, 제 13 권 제 9호, 2013
  12. Oswaldo Burciaga-Diaz, Jose Ivan Escalante-Garcia, Structure, Mechanisms of Reaction, and Strength of an Alkali- Activated Blast-Furnace Slag, Journal of the American Ceramic Society, 2013
  13. Xianjun Lu, Jun Qiu, Alkali Activation of Granulated Blast Furnace Slag, Advanced Materials Research, 2010
  14. Guangfan Li, Yong Huang and Chaohe Chen, Microstructu re of Alkali-Activated Granulated Blast Furnace Slag-Based Geopolymer, Advanced Materials Research, 2011
  15. Serdar Aydın, Bülent Baradan, Mechanical and microstructural properties of heat cured alkali-activated slag mortars, Materials & Design, 2012
  16. 이선관, 레드머드 혼입한 2성분계 지오폴리머 콘크리트의 강도특성에 관한 연구, 대한건축학회논문집 구조계, 제 30권 제 1호, 2014
  17. 이윤성, 이상수, 송하영, 산업부산물을 사용한 저탄소 무기결합재의 조건별 강도특성, 한국건축시공학회지, 제 12권 제 1 호, 2012
  18. 정성욱, 임남기, 나노슬래그와 알칼리 자극제를 활용한 비소성 시멘트 모르타르에 관한 연구, 한국건축시공학회지, 제 10 권 제 6호, 2010
  19. 강석표, 알칼리활성화 무시멘트 결합재의 촉진제로서 레드머드 활용에 관한 연구, 대한건축학회 논문집, 제 28권, 제 11 호, 2012
  20. 송하영, 배상우, 이상수, 3성분계 무기결합재의 혼합비율 및 알칼리자극제 첨가율에 따른 페이스트와 모르타르의 물리적 특성, 대한건축학회논문집 구조계, 제 28호 제 12권, 2012
  21. 박조법, 류득현, 서치호, 자극제 종류에 따른 혼화재 대량사용 결합재의 수화분석, 대한건축학회논문집 구조계, 제 28권 제 10호, 2012
  22. 박종필, 이상수, 송하영, 알칼리자극제의 안정온도 변화에 따른 저탄소 무기결합재의 기초특성, 대한건축학회 학술발표대회 논문집, 제 32권 제 2호, 2012
  23. 김규용, 구경모, 남정수, Miyauchi, Hiroyuki, 신경수, 이태규, 슬래그 결합재 모르타르의 압축강도 발현 성상, 대한건축학회논문집 구조계, 제 28호 제 9호, 2012
  24. Moruf Olalekan Yusuf, Megat Azmi Megat Johari, Zainal Arifin Ahmad, Mohammed Maslehuddin, Strength and microstructure of alkali-activated binary blended binder containing palm oil fuelash and ground blast-furnace slag, Construction and Building Materials, 2014
  25. Keun-Hyeok Yang, Kyung-Ho Lee, Jin-Kyu Song, Min-Ho Gong, Properties and sustainability of alkali-activated slag foamed concrete, Journal of Cleaner Production, 2014
  26. Rachel Redden, Narayanan Neithalath, Microstructure, strength, and moisture stability of alkali activated glass powder-based binders, Cement and Concrete Composites, 2014
  27. Cahit Bilim, Okan Karahan, Cengiz Duran Atiş, Serhan İlkentapar, Influence of admixtures on the properties of alkali -activated slag mortars subjected to different curing conditions, Materials & Design, 2013