DOI QR코드

DOI QR Code

Experimental investigation of the effects of pipe location on the bearing capacity

  • Bildik, Selcuk (Department of Civil Engineering, Osmaniye Korkut Ata University) ;
  • Laman, Mustafa (Department of Civil Engineering, Cukurova University)
  • 투고 : 2014.08.18
  • 심사 : 2014.11.15
  • 발행 : 2015.02.25

초록

A series of laboratory model tests were conducted to investigate the effects of buried pipes location on the bearing capacity of strip footing in cohesionless soil. The variables examined in the testing program include relative density of the sand, loading rate of tests, burial depths of pipe and horizontal distance of pipe to footing. The test results showed a significant increase in bearing capacities when embedment ratio of pipe and horizontal distance of pipe to footing were increased. Based on the test results, it can be concluded that the location of pipes and relative density of sand are main parameters that affect the bearing capacity of strip footing. However, loading rate has not considerable effect on bearing capacity.

키워드

참고문헌

  1. Adams, D.N., Muindi, T. and Selig E.T. (1989), "Polyethylene Pipe under High Fill", Transportation Research Record, No. 1231, pp. 88-95.
  2. ASTM D 4253-00 (2000), Standart Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table.
  3. ASTM D 4254-00 (2000), Standart Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density.
  4. Balkaya, M., Moore, I. and Saglamer, A. (2013), "Study of non-uniform bedding support under continuous PVC water distribution pipes", Tunn. Undergr. Space Technol., 35, 99-108. https://doi.org/10.1016/j.tust.2012.12.005
  5. Bildik, S. (2013), "Investigation of buried pipe systems in different soil and loading conditions", Ph.D. Thesis, Institute of Natural and Applied Science, Cukurova University, Adana, Turkey.
  6. Brachman, R.W.I. (1999), "Structural performance of Leachete collection pipes", Ph.D. Thesis, Department of Civil and Environmental Engineering, University of Western Ontario, London, ON, Canada.
  7. Brachman, R.W.I. and Krushelnitzky, R.P. (2005), "Response of a landfill drainage pipe buried in a trench", Can. Geotech. J., 42(3), 752-762. https://doi.org/10.1139/t05-005
  8. Burns, J.Q. and Richard, R.M. (1964), "Attenuation of stresses for buried cylinders", Proceedings of Soil Symposium on Soil-Structure Interaction, University of Arizona, Tucson, AZ, USA, pp. 379-392.
  9. Cameron, D.A. (2005), "Analysis of buried flexible pipes in granular backfill subjected to construction traffic", Ph.D. Thesis, Graduate School of Engineering, University of Sydney, Sydney, Australia.
  10. Cho, S. (2003), "Behaviour of Flexible Plastic Pipes with Flowable Backfill in Trench Conditions", Ph.D. Thesis, University of Houston, Houston , TX, USA.
  11. Corey, R., Han, J., Khatri, D. and Parsons, R. (2014), "Laboratory study on geosynthtetic protection of guried steel-reinforcement HDPE pipes from static loading", J. Geotech. Geoenviron. Eng., 140(6), 04014019. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001113
  12. Hoeg, K. (1966), "Pressure distiribution on underground structural cylinders", Technical Report, No. AFWL TR 65-98, Kirtland Air Force Base, Albuquerque, NM, USA.
  13. Hurd, J.O. (1986), "Field performance of corrugated polyethylene pipe culverts in Ohio", Serial of Transportation Research Record (TRR), Issue No. 1087, pp. 1.
  14. Khatri, D.K., Han, J., Parsons, R.L., Young, B., Brennan, J.J. and Corey, R. (2013), "Laboratory evaluation of deformations of steel-reinforced high-density polyethylene pipes under static loads", J. Mater. Civil Eng., 25(12), 1964-1969. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000779
  15. Marston, A. and Anderson, A.O. (1913), Bulletin No. 31, Iowa Engineering Experiment Station, Ames, IA, USA.
  16. Selig, E.T., DiFrancesco, L.C. and McGrath, T.J. (1993), "Laboratory tests of buried pipe in hoop Compression", Buried Plastic Pipe Technology, (ASTM STP 1222), PA, USA, pp. 119-132.
  17. Spangler, M.G. and Shafer, G.E. (1941), "Structural design of flexible pipe culverts", Bulletin No 153, Iowa Engineering Experiment Station, Ames, IA, USA.
  18. Sun, Z., Gong, X., Yu, J. and Zhang, J. (2013), "Analysis of the displacement of buried pipelines caused by adjacent surcharge loads", International Conference on Pipelines and Trenchless Technology, Xi'an, China, October.
  19. Talesnick, M.L., Xia, H.W. and Moore, I.D. (2011), "Earth pressure measurements on buried HDPE pipe", Geotechnique, 61(9), 721-732. https://doi.org/10.1680/geot.8.P.048
  20. Terzi, N.U. (2007), "Investigation of the effects of vertical and lateral loads on the stability of buried pipes", Ph.D. Thesis, Institute of Natural and Applied Science, Yildiz Technical University, Istanbul, Turkey.

피인용 문헌

  1. Model test and numerical simulation on the bearing mechanism of tunnel-type anchorage vol.12, pp.1, 2015, https://doi.org/10.12989/gae.2017.12.1.139
  2. Numerical and experimental study of multi-bench retained excavations vol.13, pp.5, 2015, https://doi.org/10.12989/gae.2017.13.5.715
  3. Innovative approach to determine the minimum wall thickness of flexible buried pipes vol.15, pp.2, 2018, https://doi.org/10.12989/gae.2018.15.2.755
  4. Experimental Investigation of Soil - Structure - Pipe Interaction vol.23, pp.9, 2015, https://doi.org/10.1007/s12205-019-0134-y
  5. Load-Settlement Response and Bearing Capacity of a Surface Footing Located Over a Conduit Buried Within a Soil Slope vol.20, pp.10, 2015, https://doi.org/10.1061/(asce)gm.1943-5622.0001807