DOI QR코드

DOI QR Code

Pushover Analysis of Reinforced Concrete Shear Wall Subjected to High Axial Load Using Fiber Slices and Inelastic Shear Spring

섬유(Fiber)요소와 비선형 전단스프링을 적용한 고축력을 받는 철근콘크리트 전단벽의 비선형거동 분석

  • Jun, Dae Han (Department of Civil&Architectural Engineering, Dongseo University)
  • 전대한 (동서대학교 건축토목공학부)
  • Received : 2015.04.28
  • Accepted : 2015.07.15
  • Published : 2015.09.07

Abstract

Reinforced concrete shear walls are effective for resisting lateral loads imposed by wind or earthquakes. Observed damages of the shear wall in recent earthquakes in Chile(2010) and New Zealand(2011) exceeded expectations. Various analytical models have been proposed in order to incorporate such response features in predicting the inelastic response of RC shear walls. However, the model has not been implemented into widely available computer programs, and has not been sufficiently calibrated with and validated against extensive experimental data at both local and global response levels. In this study, reinforced concrete shear walls were modeled with fiber slices, where cross section and reinforcement details of shear walls can be arranged freely. Nonlinear analysis was performed by adding nonlinear shear spring elements that can represent shear deformation. This analysis result will be compared with the existing experiment results. To investigate the nonlinear behavior of reinforced concrete shear walls, reinforced concrete single shear walls with rectangular wall cross section were selected. The analysis results showed that the yield strength of the shear wall was approximately the same value as the experimental results. However, the yielding displacement of the shear wall was still higher in the experiment than the analysis. The analytical model used in this study is available for the analysis of shear wall subjected to high axial forces.

Keywords

References

  1. Wallace JW. Behavior. Design, and Modeling of Structural Walls and Coupling Beams-Lessons from Recent Laboratory Tests and Earthquakes. International Journal of Concrete Structures and Mechanics. 2012 March;6(1):3-18. https://doi.org/10.1007/s40069-012-0001-4
  2. Matsumoto K, Kabeyasawa T, Kuramoto H. Modeling of a Wall Member in a Non-linear Frame Analysis. Architectural Institute of Japan. Journal of Structural Engineering. 1993;39B:245-254.
  3. Linde P. Numerical Modeling and Capacity Design of Eartquake- Resistant Reinforced Concrete Walls. Institut fur Baustatik und Konstruktion, Zurich. c1993, 236p.
  4. Vulcano A, Bertero VV, Colotti V. Analytical Modeling of R/C Structural Walls. Procs. 9WCEE, Tokyo-Kyoto, c1988. p.41-46.
  5. Milev JI. Two Dimensional Analytical Model of Reinforced Concrete Shear Walls. Proc. 11WCEE, c1996.
  6. Kim DK, Eom TS, Lim YJ, Lee HS, Park HG. Macro Model for Nonlinear Analysis of Reinforced Concrete Walls. Journal of the Korea Concrete Institute. 2011;23(5):569-579. https://doi.org/10.4334/JKCI.2011.23.5.569
  7. Park HG, Eom TS. Truss model for nonlinear Analysis of RC Members subject to Cyclic Loading. Journal of Structural Engineering, ASCE. 2007;133(10):1351-1363. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1351)
  8. Kim YJ, Han A, Kim SN, Yu EJ. Pushover Analysis of Reinforced Concrete Wall-Frame Structures Using Equivalent Column Model. EESK Journal of Earthquake Engineering. 2014;18(1):53-61.
  9. Yoon SJ, Lee K, Chun YS, Kim TW. Analysis of Nonlinear Seismic Behavior of Reinforced Concrete Shear Wall Systems Designed with Special and Seimi-Special Seismic Details. EESK Journal of Earthquake Engineering. 2013;17(1):43-51.
  10. Shin J, Kim J, You Y, Choi K, Kim H. Research on the Non-linear Analysis of Reinforced Concrete Shear Walls Considering Different Macroscopic Models. EESK Journal of Earthquake Engineering. 2012;16(5):1-11.
  11. Seol MC. Nonlinear Analysis of Reinforced Concrete Shear Wall Using Fiber Model, Dongseo University, Master's Thesis. c2004, 43p.
  12. Zhang Y, Wang Z. Seismic Behavior of Reinforced Concrete Shear Walls Subjected to High Axial Loading. ACI Structural Journal. 2000;97(5):739-750.
  13. ASCE/SEI 41-06. Seismic Rehabilitation of Existing Buildings. American Society of Civil Engineers. c2007.
  14. Paulay T, Priestley MJN. Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley&Sons. c1991. 744p.
  15. Li KN. 3-Dimensional Nonlinear Static/Dynamic Structural Analysis Computer Program Package-Users Manual, CANNY CONSULTANTS PTE LTD, Singapore. c2010.
  16. Krolicki J, Maffei J, Calvi CM. Shear Strength of Reinforced Concrete Walls Subjected to Cyclic Loading. Journal of Earthquake Engineering. 2011;15(S1):30-71. https://doi.org/10.1080/13632469.2011.562049
  17. PEER/ATC-72-1. Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings-Task7 Report for Tall Buildings Initiative, Pacific Earthquake Engineering Center, University of California, Berkeley. c2010.
  18. Englekirk RE. Seismic Design of Reinforced and Precast Concrete Buildings, John Wiley&Sons. c2003. 825p.