Advances in materials Research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Elastic-plastic analysis of the J integral for repaired cracks in plates

  • Salem, Mokadem (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes) ;
  • Bouiadjra, Belabbes Bachir (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes) ;
  • Mechab, Belaid (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes) ;
  • Kaddouri, Khacem (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes)
  • Received : 2015.04.25
  • Accepted : 2015.08.05
  • Published : 2015.06.25
⟨ Previous Next ⟩

Abstract

In this paper, three-dimensional finite element method is used to analyze the J integral for repaired cracks in plates with bonded composite patch and stiffeners. For elastic the effect of cracks, the thickness of the patch ($e_r$) and properties of the patch are presented for calculating the J integral. For elastic-plastic a several calculations have been realized to extract the plasticized elements around the crack tip of repaired and un-repaired crack. The obtained results show that the presence of the composite patch and stiffener reduces considerably the size of the plastic zone ahead of the crack. The effects of crack size and the inter-distance of repaired cracks were analysed.

Keywords

References

  1. ABAQUS (2007), ABAQUS standard/user's manual, version 6.5. Hibbit Karlsson & Sorensen, Inc, Pawtucket, RI, USA.
  2. Achour, T., Bachir Bouiadjra, B. and Serier, B. (2003), "Numerical analysis of the performances of the bonded composite patch for reducing stress concentration and repairing cracks at notch", Comput. Mater. Sci., 28, 41-48. https://doi.org/10.1016/S0927-0256(03)00054-5
  3. Bachir Bouiadjra, B., Oudad, W., Albedah, A., Benyahia, F. and Belhouari, M. (2012), "Effects of the adhesive disband on the performances of bonded composite repairs in aircraft structures", Mater. Des., 37, 89-95. https://doi.org/10.1016/j.matdes.2011.12.028
  4. Bachir Bouiadjra, B., Belhouari, M. and Serier, B. (2002), "Computation of the stress intensity factor for repaired crack with bonded composite patch in mode I and mixed mode", Compos. Struct., 56, 401-406. https://doi.org/10.1016/S0263-8223(02)00023-5
  5. Ban, C.S., Lee, Y.H., Choi, J.H. and Kweon, J.H. (2008), "Strength prediction of adhesive joints using the modified damage zone theory", Compos. Struct., 86, 96-100. https://doi.org/10.1016/j.compstruct.2008.03.016
  6. Chen, Y.Z. and Lin, X.Y. (2010), "Numerical solution of singular integral equation for multiple curved branch-cracks", Struct. Eng. Mech., 34, 85-95 https://doi.org/10.12989/sem.2010.34.1.085
  7. Cetisli, F. and Kaman, M.O. (2014), "Numerical analysis of interface crack problem in composite plates jointed with composite patch", Steel Compos. Struct., 16, 203-220 https://doi.org/10.12989/scs.2014.16.2.203
  8. Costa Mattas, H.S., Monteiro, A.H. and Palazzetti, R. (2012), "Failure analysis of adhesively bonded joints incomposite materials", Mater. Des., 33, 242-7. https://doi.org/10.1016/j.matdes.2011.07.031
  9. Gu, L., Kasavajhala, A.R.M. and Zhao, S. (2011), "Finite element analysis of cracks in aging aircraft structures with bonded composite-patch repairs", Compos. Part B, 42, 505-10. https://doi.org/10.1016/j.compositesb.2010.11.014
  10. Jones, R. and Chiu, W.K. (1999), "Composite repairs to crack in metallic components", Compos Struct., 44(29), 317-325.
  11. Hosseini-Toudeshky, H., Ghaffari, M.A. and Mohammadi, B. (2011), "Fatigue propagation of induced cracks by stiffeners in repaired panels with composite patches", Proc. Eng., 10, 3285-3290. https://doi.org/10.1016/j.proeng.2011.04.542
  12. Lam, A.C.C., Yam, M.C.H., Cheng, J.J.R. and Kennedy, G.D. (2010), "Study of stress intensity factor of a cracked steel plate with a single-side CFRP composite patching", J. Compos. Constr., 14, 791-803. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000136
  13. Liu, H.B., Xiao, Z.G., Zhao, X.L. and Al-Mahaidi, R. (2009), "Prediction of fatigue life for CFRP strengthened steel plates", Thin Wall. Struct., 47, 1069-77. https://doi.org/10.1016/j.tws.2008.10.011
  14. Mhamdia, R., Serier, B., Bachir Bouiadjra, B. and Belhouari, M. (2012), "Numerical analysis of the patch shape effects on the performances of bonded composite repair in aircraft structures", Compos. Part B, 43, 391-397. https://doi.org/10.1016/j.compositesb.2011.08.047
  15. Oudad, W., Bachir Bouiadjra, B., Belhouari, M., Touzain, S. and Feaugas, X. (2009), "Analysis of the plastic zone size ahead of repaired cracks with bonded composite patch of metallic aircraft structures", Comput. Mater. Sci., 46, 950-954. https://doi.org/10.1016/j.commatsci.2009.04.041
  16. Rose, L.R.F. (1981), "An application of the inclusion analogy for bonded reinforcements", Int. J. Solid. Struct., 17, 827-38. https://doi.org/10.1016/0020-7683(81)90091-3
  17. Sapora, A., Cornetti, P. and Carpinteri, A. (2014), "V-notched elements under mode II loading conditions", Struct. Eng. Mech., 49,499-508. https://doi.org/10.12989/sem.2014.49.4.499
  18. Sayman, O., Ozen, M. and Korkmaz, B. (2013), "Elasto-plastic stress distributions in adhesively bonded double lap joints", Mater. Des., 45, 31-5. https://doi.org/10.1016/j.matdes.2012.09.005
  19. Shen, H. and Hou, C. (2011), "SIFs of CCT plate repaired with single-sided composite patch", Fatig. Fract. Eng. Mater. Struct., 34, 728-33. https://doi.org/10.1111/j.1460-2695.2011.01569.x
  20. Shouetsu, I. (2009), "Dynamic stress intensity factors for two parallel cracks in an infinite orthotropic plate subject to an impact load", Struct. Eng. Mech., 33, 697-708 https://doi.org/10.12989/sem.2009.33.6.697

Cited by

  1. New optimization method of patch shape to improve the effectiveness of cracked plates repair vol.58, pp.2, 2016, https://doi.org/10.12989/sem.2016.58.2.301
  2. Numerical analysis of the influences of thermal stresses on the efficiency of bonded composite repair of cracked metallic panels vol.51, pp.26, 2017, https://doi.org/10.1177/0021998317692033
  3. Effect of the corrosion of plate with double cracks in bonded composite repair vol.64, pp.3, 2017, https://doi.org/10.12989/sem.2017.64.3.323
  4. Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane vol.72, pp.6, 2015, https://doi.org/10.12989/sem.2019.72.6.775