Journal of the Korean Society for Advanced Composite Structures (복합신소재구조학회 논문집)

Korean Society for Advanced Composite Structures (한국복합신소재구조학회)
권호 표지
DOI QR코드

DOI QR Code

Parametric Study for Optimum Shape of Gestation Stall Structures

임신돼지용 스톨 구조물의 최적형상을 위한 파라미터 해석

  • Son, Byung Jik (Department of International Civil & Plant Engineering, Konyang University)
  • 손병직 (건양대학교 해외건설플랜트학과)
  • Received : 2016.03.02
  • Accepted : 2016.03.15
  • Published : 2016.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study analyzes gestation stall structures with high strength concrete. The ANSYS program described in this paper is effective not only because it shows good accuracy but also it shows the goodness of parameter studies by using APDL(ANSYS Parametric Design Language). We have performed the various parameter studies by thickness change. The results is presented by using contours and tables. The analysis results showed that it was effective to increase the height thickness(tz) rather than longitudinal thickness(tx).

Keywords

References

  1. Alinia M. M.(2005), "A study into optimization of stiffeners in plates subjected to shear loading", Thin-Walled Structures 43, pp. 845-860 https://doi.org/10.1016/j.tws.2004.10.008
  2. Alinia M. M., Moosavi S. H.(2008), "A parametric study on the longitudinal stiffeners of web panels", Thin-Walled Structures 46, pp. 1213-1223 https://doi.org/10.1016/j.tws.2008.02.004
  3. Anatoly Perelmuter, Vitalina Yurchenko(2013), "Parametric Optimization of Steel Shell Towers of High-Power Wind Turbines", Procedia Engineering 57, pp. 895-905 https://doi.org/10.1016/j.proeng.2013.04.114
  4. ANSYS version 15.0(2013), "Structural Analysis Guide"
  5. B. Gangadhara Prushy, S.K. Satsangi(2001), "Analysis of stiffened shell for ships and ocean structures by finite element method", Ocean Engineering 28, pp. 621-638 https://doi.org/10.1016/S0029-8018(00)00021-4
  6. Daniel Zwick, Michael Muskulus, Geir, Moe(2012), "Iterative optimization approach for the design of full-height lattice towers for offshore wind turbines", Energy Procedia 24, pp. 297-304 https://doi.org/10.1016/j.egypro.2012.06.112
  7. Park, J. M., Lee, S. Y., Ji H. Y., Son, B. J.(2014) , "Optimal Fiber-Angle of Wind Turbine Tower made of Composites under Wind Loads", J. Korean Soc. Adv. Comp. Struc. Vol. 5, No. 1, pp. 9-15 https://doi.org/10.11004/kosacs.2014.5.1.009
  8. Son, B. J., Uy Lymei (2014), "Study on Validity of Pigpen made of Polycarbonate", J. Korean Soc. Adv. Comp. Struc. Vol. 5, No. 3, pp. 32-36 https://doi.org/10.11004/kosacs.2014.5.3.032
  9. Son, B. J. (2014), "Feasibility Study of Pigpen Structures with Polycarbonate through Economic Analysis", J. Korean Soc. Adv. Comp. Struc. Vol. 5, No. 4, pp. 58-64 https://doi.org/10.11004/kosacs.2014.5.4.058