DOI QR코드

DOI QR Code

Numerical simulation of hydraulic fracturing in circular holes

  • Haeri, Hadi (Young Researchers and Elite Club, Bafgh Branch, Islamic Azad University) ;
  • Sarfarazi, Vahab (Department of Mining Engineering, Hamedan University of Technology) ;
  • Hedayat, Ahmadreza (Department of Civil and Environmental Engineering, Colorado School of Mines) ;
  • Zhu, Zheming (College of Architecture and Environment, Sichuan University)
  • Received : 2016.04.24
  • Accepted : 2016.09.27
  • Published : 2016.12.25

Abstract

For investigating the effect of the pre-existing joints on the initiation pattern of hydraulic fractures, the numerical simulation of circular holes under internal hydraulic pressure with a different pattern of the joint distributions are conducted by using a finite element code, FRANC2D. The pattern of hydraulic fracturing initiation are scrutinized with changing the values of the joint length, joint offset angle. The hydraulic pressures with 70% of the peak value of borehole wall breakout pressure are applied at the similar models. The simulation results suggest that the opening-mode fracture initiated from the joint tip and propagated toward the borehole for critical values of ligament angle and joint offset angle. At these critical values, the crack grow length is influenced by joint ligament length. When the ligament length is less than 3 times the borehole diameter the crack growth length increases monotonically with increasing joint length. The opening-mode fracture disappears at the joint tip as the ligament length increases.

Keywords

References

  1. Azeemuddin, M, Ghori, S.G., Saner, S. and Khan, M.N. (2002), "Injection-induced hydraulic fracturing in a naturally fractured carbonate reservoir: a case study from Saudi Arabia", SPE 73784, presented at the SPE international symposium & exhibition on formation damage control, Lafayette, LA, 20-21 February 2002.
  2. Blair, S.C., Thorpe, R.K., Heuze, F.E., Shaffer, R.J.(1989), Laboratory observations of the effect of geological discontinuities on hydrofracture propagation, Proceedings of the 30th US Symposium on Rock Mechanics, Morgantown, 433-50.
  3. Blanton, T.L. (1982), An experimental study of interaction between hydraulically induced and pre-existing fractures. SPE 10847, Presented at the SPE/DOE unconventional gas recovery symposium, Pittsburgh, 16-18 May.
  4. Blanton, T.L. (1986), Propagation of hydraulically and dynamically induced fractures in naturally fractured reservoirs, SPE 15261, Presented at the SPE/DOE unconventional gas technology symposium, Louisville, 18-21 May.
  5. Board, M., Rorke, T., Williams, G. and Gay, N. (1992), Fluid injection for rockburst control in deep mining. In: Tillerson JR, Wawersik WR, editors, Proceedings of the 33rd U.S. symposium on rock mechanics, Rotterdam: Balkema; 111-20.
  6. Boutt, D.F, Goodwin, L. and McPherson, B.J.O.L (2009), "Role of permeability and storage in the initiation and propagation of natural hydraulic fractures", Water Resour Res., 45(5), 1-18.
  7. Britt, L.K. and Hager, C.J. (1994), Hydraulic fracturing in a naturally fractured reservoir, SPE 28717, Presented at the SPE international petroleum conference and exhibition, Veracruz, Mexico, 10-13, October.
  8. Daneshy, A.A. (1974), Hydraulic fracture propagation in the presence of planes of weakness, SPE 4852, Presented at the SPE-European Spring Meeting, Amsterdam, 29-30 May.
  9. De Pater, C.J. and Beugelsdijk, L.J.L. (2005), Experiments and numerical simulation of hydraulic fracturing in naturally fractured rock, Proceedings of the US Rock Mechanics Symposium, Anchorage, Alaska 25-29. June.
  10. Desroches, J. (1995), Stress testing with the micro-hydraulic fracturing technique-focus on fracture reopening. In: Daemen JK, Schultz RA, editors, Proceedings of the 35th U.S. symposium on rock mechanics, Rotterdam: Balkema; 217-23.
  11. Desroches, J. and Thiercelin, M. (1993), "Modeling propagation and closure of micro-hydraulic fracturing", Int. J. Rock Mech. Min. Sci., 30(7), 1231-1234. https://doi.org/10.1016/0148-9062(93)90100-R
  12. Dong, C.Y. and De Pater, C.J. (2001), "Numerical implementation of displacement discontinuity method and its application in hydraulic fracturing", Comput. Method. Appl. Mech. Eng., 191(8), 745-760. https://doi.org/10.1016/S0045-7825(01)00273-0
  13. Frasch, H. (1896), "Increasing the flow of oil-wells", U.S. Patent Number 556669, United States Patents and Trademark Office, Washington D.C.
  14. Grebe, J.J. and Stoesser, M. (1935), Increasing crude production 20,000,000 bbl. from established fields, World Petroleum J., August, 473-82.
  15. Haeri, H. (2011), "Numerical modeling of the interaction between micro and macro cracks in the rock fracture mechanism using displacement discontinuity method", Ph.D. Thesis, Department of mining engineering, Science and Research branch, Islamic Azad University, Tehran, Iran.
  16. Haeri, H. (2015f), "Propagation mechanism of neighboring cracks in rock-like cylindrical specimens under uniaxial compression", J. Min. Sci., 51(3), 487-496. https://doi.org/10.1134/S1062739115030096
  17. Haeri, H. (2015g), "Influence of the inclined edge notches on the shear-fracture behavior in edge-notched beam specimens", Comput. Concrete, 16(4), 605-623. https://doi.org/10.12989/cac.2015.16.4.605
  18. Haeri, H. (2015h), "Experimental crack analysis of rock-like CSCBD specimens using a higher order DDM", Comput. Concrete, 16(6), 881-896. https://doi.org/10.12989/cac.2015.16.6.881
  19. Haeri, H. and Sarfarazi, V. (2016a), "The effect of micro pore on the characteristics of crack tip plastic zone in concrete", Comput. Concrete, 17(1), 107-12. https://doi.org/10.12989/cac.2016.17.1.107
  20. Haeri, H., Ahranjani, A.K. (2012), "A fuzzy logic model to Predict crack propagation angle under Disc Cutters of TBM", Int. J. Academic Res., 4(3),156-169.
  21. Haeri, H., Khaloo, A. and Marji, M.F. (2015d), "A coupled experimental and numerical simulation of rock slope joints behavior", Arab. J. Geosci., 8(9), 7297-7308. https://doi.org/10.1007/s12517-014-1741-z
  22. Haeri, H., Khaloo, A. and Marji, M.F. (2015e), "Experimental and numerical simulation of the microcracks coalescence mechanism in rock-like materials", Strength Mater., 47(1), 740-754. https://doi.org/10.1007/s11223-015-9711-6
  23. Haeri, H., khaloo, K. and Marji, M.F. (2015b), "Experimental and numerical analysis of Brazilian discs with multiple parallel cracks", Arab. J. Geosci., 8(8), 5897-5908. https://doi.org/10.1007/s12517-014-1598-1
  24. Haeri, H., Marji, M.F. and Shahriar, K. (2015a), "Simulating the effect of disc erosion in TBM disc cutters by a semi-infinite DDM", Arab. J. Geosci., 8(6), 3915-3927. https://doi.org/10.1007/s12517-014-1489-5
  25. Haeri, H., Sarfarazi, V. and Lazemi, H.A. (2016b), "Experimental study of shear behavior of planar nonpersistent joint", Comput. Concrete, 17(5), 639-653. https://doi.org/10.12989/cac.2016.17.5.639
  26. Haeri, H., Shahriar, K., Marji, M.F. and Moaref Vand, P. (2013a), Modeling the propagation mechanism of two random micro cracks in rock samples under uniform tensile loading, Proceedings of 13th International Conference on Fracture, China.
  27. Haeri, H., Shahriar, K., Marji, M.F. and Moaref Vand, P. (2013b), Simulating the bluntness of TBM Disc cutters in rocks using displacement discontinuity method, Proceedings of 13th International Conference on Fracture, China.
  28. Haeri, H., Shahriar, K., Marji, M.F. and Moarefvand, P. (2014a), "Investigating the fracturing process of rock-like Brazilian discs containing three parallel cracks under compressive line loading", Strength Mater., 46(3), 133-148.
  29. Haeri, H., Shahriar, K., Marji, M.F. and Moarefvand, P. (2014b), "On the cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression", J. Central South Univ., 21(6), 2404-2414. https://doi.org/10.1007/s11771-014-2194-y
  30. Haeri,H., Shahriar, K., Marji, M.F. and Moarefvand, P. (2015c), "The HDD analysis of micro cracks initiation, propagation and coalescence in brittle substances", Arab. J. Geosci., 8(5), 2841-2852 https://doi.org/10.1007/s12517-014-1290-5
  31. Kresse, O. and Weng, X. et al. (2013), "Numerical modeling of hydraulic fractures interaction in complex naturally fractured formations", Rock Mech. Rock Eng., 46(3), 555-568. https://doi.org/10.1007/s00603-012-0359-2
  32. Lamont, N. and Jessen, F. (1963.), "The effects of existing fractures in rocks on the extension of hydraulic fractures", J. Petrol. Technol., February, 203-9.
  33. Li, L.C., Tang, C.A., Li, G., Wang, S.Y., Liang, Z.Z. and Zhang, Y.B. (2012b), "Numerical simulation of 3D hydraulic fracturing based on an improved flow-stress-damage model and a parallel FEM technique", Rock Mech. Rock Eng., 45(5), 801-818. https://doi.org/10.1007/s00603-012-0252-z
  34. Lin, P, Zhou, W.Y. and Liu, H.Y. (2015), "Experimental study on cracking, reinforcement and overall stability of the Xiaowan super-high arch dam", Rock Mech. Rock Eng. 48(2), 819-841. https://doi.org/10.1007/s00603-014-0593-x
  35. Liu, H., Zhang, G., Zhang, J., BIAO, F., WU, H.A. and WANG, X. (2010), "Friction loss calculation and surface pressure prediction in oil well hydraulic fracturing", Chin. J. Rock Mech. Eng., 29, 2833-2839.
  36. Mack, M.G. and Warpinski, N.R. (2000), "Mechanics of hydraulic fracturing", Economides, Nolte, editors. Reservoir stimulation, 3rd ed. Chichester; Wiley, Chapter 6.
  37. Moschovidis (2000), The Mounds drill-cuttings injection experiment: final results and conclusions, Proceedings of the IADC/ SPE drilling conference, 23-25, New Orleans, February, Richardson: Society of Petroleum Engineers.
  38. Murphy, H.D. and Fehler, M.C. (1986), Hydraulic fracturing of jointed formations, Presented at the SPE international meeting on petroleum engineering, 17-20, Beijing, March.
  39. Nagel, N.B., Sanchez-Nagel, M.A. et al. (2013), "Coupled numerical evaluations of the geomechanical interactions between a hydraulic fracture stimulation and a natural fracture system in shale formations", Rock Mech. Rock Eng., 46(3), 581-609. https://doi.org/10.1007/s00603-013-0391-x
  40. Pine, R.J. and Cundall, P.A. (1985), Applications of the Fluid-Rock Interaction Program (FRIP) to the modelling of hot dry rock geothermal energy systems, Proceedings of the international symposium on fundamentals of rock joints, Bjorkliden, 293-302, Sweden, September.
  41. Reugelsdijk, L.J.L, Beugelsdijk, L.J.L, de Pater, C.J. and Sato, K. (2000), Experimental hydraulic fracture propagation in multi-fractured medium, Presented at the SPE Asia Pacific conference on integrated modeling, 25-26, Yokohoma, April.
  42. Rodgerson, J.L. (2000), Impact of natural fractures in hydraulic fracturing of tight gas sands, Presented at the SPE Permian basin oil and gas recovery conference, 21-23, Midland, TX, March.
  43. Shimizu, H., Murata, S. and Ishida, T. (2011), "The distinct element analysis for hydraulic fracturing in hard rock considering fluid viscosity and particle size distribution", Int. J. Rock Mech. Min. Sci., 48(5), 712-727. https://doi.org/10.1016/j.ijrmms.2011.04.013
  44. Veatch, R.W., Moschovidis, Z.A. and Fast, C.R. (1989), "An overview of hydraulic fracturing", Gidley, Holditch, Nierode, Veatch, editors, Recent advances in hydraulic fracturing, Monograph, 12, Richardson: Society of Petroleum Engineers, 1-38.
  45. Vinod, P.S., Flindt, M.L., Card, R.J. and Mitchell, J.P. (1997), Dynamic fluid-loss studies in lowpermeability formations with natural fractures, Presented at the SPE production operations Symposium, 9-11, Tulsa, March.
  46. Wangen, M. (2011), "Finite element modeling of hydraulic fracturing on a reservoir scale in 2D", J. Pet Sci. Eng., 77(3), 274-285. https://doi.org/10.1016/j.petrol.2011.04.001
  47. Warpinski, N.R. and Teufel, L.W. (1987), "Influence of geologic discontinuities on hydraulic fracture propagation", J. Petrol. Technol., 39(02), 209-220. https://doi.org/10.2118/13224-PA
  48. Wawrzynek, P.A. and Ingraffea, A.R. (1987), "Interactive finite element analysis of fracture processes: an integrated approach", Theo. Appl. Fract. Mech., 8(2), 137-150. https://doi.org/10.1016/0167-8442(87)90007-3
  49. Weibull, W. (1951), "Wide applicability", J. Appl. Mech., 103, 293-297.
  50. Wong, T.F., Wong, R.H., Chau, K.T. and Tang, C.A. (2006), "Microcrack statistics, Weibull distribution and micromechanical modeling of compressive failure in rock", Mech. Mater., 38(7), 664-681. https://doi.org/10.1016/j.mechmat.2005.12.002
  51. Wu, K. and Olson, J.E. (2015), "Simultaneous multifracture treatments: fully coupled fluid flow and fracture mechanics for horizontal wells", SPE J., 20(02), 337-346. https://doi.org/10.2118/167626-PA
  52. Wu, K., Paton, D. and Zha, M. (2013), "Unconformity structures controlling stratigraphic reservoirs in the north-west margin of Junggar basin, North-west China", Frontiers Earth Sci., 7(1), 55-64. https://doi.org/10.1007/s11707-012-0344-9
  53. Yang, T.H., Tham, L.G., Tang, C.A., Liang, Z.Z. and Tsui, Y. (2004), "Influence of heterogeneity of mechanical properties on hydraulic fracturing in permeable rocks", Rock Mech. Rock Eng., 37(4), 251-275. https://doi.org/10.1007/s00603-003-0022-z
  54. Yu, J., Li, H., Chen, X., Cai, Y. and Mu, K. (2014), "Experimental study of permeability and acoustic emission characteristics of sandstone during processes of unloading confining pressure and deformation", Chin. J. Rock Mech. Eng., 33(1), 69-79.
  55. Zhang, G.M., Liu, H., Zhang, J., Wu, H.A. and Wang, X.X. (2010), "Three-dimensional finite element simulation and parametric study for horizontal well hydraulic fracture", J. Petrol. Sci. Eng., 72(3), 310-317. https://doi.org/10.1016/j.petrol.2010.03.032
  56. Zhu, H.Y,, Deng, J. et al. (2015), "Hydraulic fracture initiation and propagation of oil and gas wellbore with oriented perforating technique", Rock Mech. Rock Eng., 48(2), 585-601. https://doi.org/10.1007/s00603-014-0608-7
  57. Zhu, H.Y., Deng, J.G., Chen, Z.J., An, F.C., Liu, S.J., Peng, C.Y.... and Dong, G. (2013), "Perforation optimization of hydraulic fracturing of oil and gas well", Geomech. Eng., 5(5), 463-483. https://doi.org/10.12989/gae.2013.5.5.463
  58. Zhu, H.Y., Deng, J.G., Zhao, J., Zhao, H., Liu, H.L. and Wang, T. (2014), "Cementing failure of the casingcement-rock interfaces during hydraulic fracturing", Comput. Concrete, 14(1), 91-107. https://doi.org/10.12989/cac.2014.14.1.091