대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

  • 제32권7호
  • /
  • Pages.49-56
  • /
  • 2016
  • /
  • 1226-9107(pISSN)
  • /
  • 2384-1788(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

하이브리드 섬유를 혼입한 고강도 모르타르의 역학적 특성에 관한 연구

A Study on the Mechanical Property of High Strength Mortar Reinforced With Hybrid Fibers

  • 투고 : 2016.03.31
  • 심사 : 2016.06.21
  • 발행 : 2016.07.30
⟨ 이전 논문 다음 논문 ⟩

초록

Recently as a way to overcome the limitations of fiber-reinforced concrete(FRC), it is considered that development possibility of HPHRC(High Performance Hybrid fiber Reinforced concrete) is high, because HPHRC containing one or more type of fiber which differ in length and mixing proportion permits to control the structural cracks and increase the toughness of the concrete composites. However the existing researches which excludes the influence of the compressive strength are far from practical application. This paper is a fundamental study on the compressive strength properties to induce a high strength and flexibility of HPFRC. So it concentrates on highlighting mechanical property of high strength mortar reinforced by hybrid fiber.

키워드

과제정보

연구 과제 주관 기관 : 한국연구재단

참고문헌

  1. Ahn, Y. (2005). A Study of Tension Properties on Hybrid Fiber Reinforced Cement-Based Composite, Thesis, Seoul National University, 52.
  2. Dawood, E., & Ramli, M. (2012). Mechanical properties of high strength flowing concrete with hybrid fibers, Construction and Building Materials, 28(1), 193-200. https://doi.org/10.1016/j.conbuildmat.2011.08.057
  3. Hsie, M., Tu, C., & Song, P. (2008) Mechanical properties of polypropylene hybrid fiber-reinforced concrete, Materials Science and Engineering: A, 494(1), 153-157. https://doi.org/10.1016/j.msea.2008.05.037
  4. Kwak, C. (2011). Effect of Micro Steel Fibers on Fluidity and Mechanical Performance of High-Strength Cementitious Material, Thesis, Han Yang University, 37.
  5. Lee, S. (2008). The Effect of High Strength Concrete by Admixture Types and Mixture Condition, Thesis, Dae Jeon University, 1.
  6. Moon, H., & Choi, Y. (1998). The effect of ground granulated blast-furnace slag on the control of temperature rising in high strength concrete, Journal of the KCI, 10(4), 195-204.
  7. Park, C., Noh M., & Park, D. (2005). Flexural and workable properties of high performance hybrid fiber reinforced concrete, Journal of the KCI, 17(4), 543-550.
  8. Oh, B. (1996). A Study on the strength and drying shrinkage crack control characteristics of polypropylene fiber reinforced concrete, Journal of the KCI, 8(6), 151-161.
  9. Won, J., & Park, C. (2006). Performance and application of hybrid fiber reinforced concrete, Journal of the KCI, 18(1), 22-27.