DOI QR코드

DOI QR Code

An elastoplastic bounding surface model for the cyclic undrained behaviour of saturated soft clays

  • Cheng, Xinglei (State Key Laboratory of Hydraulic Engineering Simulation and Safety of Tianjin University, Tianjin University) ;
  • Wang, Jianhua (State Key Laboratory of Hydraulic Engineering Simulation and Safety of Tianjin University, Tianjin University)
  • 투고 : 2015.05.29
  • 심사 : 2016.05.01
  • 발행 : 2016.09.25

초록

A total stress-based bounding surface model is developed to predict the undrained behaviour of saturated soft clays under cyclic loads based on the anisotropic hardening modulus field and bounding-surface theories. A new hardening rule is developed based on a new interpolation function of the hardening modulus that has simple mathematic expression and fewer model parameters. The evolution of hardening modulus field is described in the deviatoric stress space. It is assumed that the stress reverse points are the mapping centre points and the mapping centre moves with the variation of loading and unloading paths to describe the cyclic stress-strain hysteresis curve. In addition, by introducing a model parameter that reflects the accumulation rate and level of shear strain to the interpolation function, the cyclic shakedown and failure behaviour of soil elements with different combinations of initial and cyclic stresses can be captured. The methods to determine the model parameters using cyclic triaxial compression tests are also studied. Finally, the cyclic triaxial extension and torsional shear tests are performed. By comparing the predictions with the test results, the model can be used to describe undrained cyclic stress-strain responses of elements with different stress states for the tested clays.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Anastasopoulos, I., Gelagoti, F., Kourkoulis, R. and Gazetas, G. (2011), "Simplified constitutive model for simulation of cyclic response of shallow foundations: Validation against laboratory tests", J. Geotech. Geoenviron. Eng., ASCE, 137(12), 1154-1168. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000534
  2. Anderson, K.H. (2009), "Bearing capacity under cyclic loading-offshore, along the coast, and on land", Can. Geotech. J., 46(5), 513-535. https://doi.org/10.1139/T09-003
  3. API RP2A-WSD (2002), Recommended practice for planning, designing, and constructing fixed offshore platforms-working stress design; American Petroleum Institute, Houston, TX, USA.
  4. Borja, R.I. and Amies, A.P. (1994), "Multiaxial cyclic plasticity model for clays", J. Geotech. Eng., 120(6), 1051-1070. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:6(1051)
  5. Chen, W. and Randolph, M.F. (2007), "Uplift capacity of suction caissons under sustained and cyclic loading in soft clay", J. Geotech. Geoenviron. Eng., 133(11), 1352-1363. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1352)
  6. Crouch, R.S. and Wolf, J.P. (1994), "Unified 3D critical state bounding-surface plasticity model for soils incorporating continuous plastic loading under cyclic paths", Int. J. Numer. Anal. Method. Geomech., 18(11), 735-784. https://doi.org/10.1002/nag.1610181102
  7. Dafalias, Y.F. and Herrmann, L.R. (1982), "A generalized bounding sufrace constitutive model for clays", Application of Plasticity and Generalized Stress-Strain in Geotechnical Engineering, Proceedings of the Symposium on Limit Equilibrium, Plasticity, and Generalized Stress Strain Applications in Geotechnical Engineering, ASCE, Hollywood, FL, USA, October, pp. 78-95.
  8. Dafalias, Y.F. and Herrmann, L.R. (1986), "Bounding surface plasticity. Part II: Application to isotropic cohesive soils", J. Eng. Mech., 112(12), 1263-1291. https://doi.org/10.1061/(ASCE)0733-9399(1986)112:12(1263)
  9. Hong, P.Y., Pereira, J.M., Cui, Y.J., Tang, A.M., Collin, F. and Li, X.L. (2014), "An elastoplastic model with combined isotropic-kinematic hardening to predict the cyclic behavior of stiff clays", Comput. Geotech., 62, 193-202. https://doi.org/10.1016/j.compgeo.2014.07.008
  10. Hu, C., Liu, H.X. and Huang, W. (2012), "Anisotropic bounding-surface plasticity model for the cyclic shakedown and degradation of saturated clay", Comput. Geotech., 44, 34-47. https://doi.org/10.1016/j.compgeo.2012.03.009
  11. Huang, M.S. and Liu, Y. (2014), "Numerical analysis of axial cyclic degradation of a single pile in saturated soft soil based on nonlinear kinematic hardening constitutive model", Chinese J. Geotech. Eng., 36(12), 2170-2178.
  12. Huang, M.S., Liu, M and Liu, Y.H. (2009), "Anisotropic bounding surface model for saturated soft clay under cyclic loading", J. Hydraul. Eng., 40(2), 188-193.
  13. Huang, M.S., Liu, Y.H. and Sheng, D.C. (2011), "Simulation of yielding and stress-strain behavior of shanghai soft clay", Comput. Geotech., 38(3), 341-353. https://doi.org/10.1016/j.compgeo.2010.12.005
  14. Kimoto, S., Shahbodagh Khan, B., Mirjalili, M. and Oka, F. (2013), "Cyclic elastoviscoplastic constitutive model for clay considering nonlinear kinematic hardening rules and structural degradation", Int. J. Geomech., ASCE, 15(5), A4014005. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000327
  15. Li, G.X. (2004), Advanced Soil Mechanics, Tsing Hua University Publishing House, Beijing, China.
  16. Li, T. and Meissner, H. (2002), "Two-surface plasticity model for cyclic undrained behavior of clays", J. Geotech. Geoenviron. Eng., ASCE, 128(7), 613-626. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:7(613)
  17. Liang, R.Y. and Ma, F.G. (1992), "Anisotropic plasticity model for undrained cyclic behavior of clays", J. Geotech. Eng., ASCE, 118(2), 229-265. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:2(229)
  18. Mroz, Z., Norris, V.A. and Zienkiewicz, O.C. (1981), "An anisotropic, critical state model for soils subject to cyclic loading", Geotechnique, 31(4), 451-469. https://doi.org/10.1680/geot.1981.31.4.451
  19. Ni, J., Indraratna, B., Geng, X.Y., Carter, J.P. and Chen, Y.L. (2015), "Model of soft soils under cyclic loading", Int. J. Geomech., 15(4), 04014067 https://doi.org/10.1061/(ASCE)GM.1943-5622.0000411
  20. Pande, G.N. and Pietruszczak, S. (1982), "Reflecting surface model for soils", Proceedings of International Symposium on Numerical Models in Geomechanics, Zurich, Switzerland.
  21. Prevost, J.H. (1977), "Mathematical modelling of monotonic and cyclic undrained clay behaviour", Int. J. Numer. Anal. Method. Geomech., 1(2), 195-216. https://doi.org/10.1002/nag.1610010206
  22. Seidalinov, G. and Taiebat, M. (2014), "Bounding surface SANICLAY plasticity model for cyclic clay behaviour", Int. J. Numer. Anal. Method. Geomech., 38(7), 702-724. https://doi.org/10.1002/nag.2229
  23. Tabbaa, A.Al. and Wood, D.M. (1989), "An experimentally based "bubble" model for clay", Proceedings of the 3rd International Symposium on Numerical Models in Geomechanics, Niagara Falls, Canada, May.
  24. Wang, J.H. and Qu, Y.D. (2011), "Unconsolidated and undrained strength and failure criterion of soft clay under cyclic stresses", J. Hydraul. Eng., 42(6), 672-677.
  25. Wang, J.H. and Yao, M.l. (1996), "Elastoplastic simulation of the cyclic undrained behaviour of soft clays", Chinese J. Geotech. Eng., 18(3), 11-18.
  26. Xiong, Y.C. and Chen, J.Z. (2008), "Cyclic elasto-plastic constitutive model considering anisotropic effect", Chinese J. Geotech. Eng., 30(8), 1165-1170.
  27. Yin, Z.Y., Xu, Q. and Hicher, P.Y. (2013), "A simple critical-state-based double-yield-surface model for clay behavior under complex loading", Acta Geotechnica, 8(5), 509-523. https://doi.org/10.1007/s11440-013-0206-y
  28. Yu, H.S., Khong, C. and Wang, J. (2007), "A unified plasticity model for cyclic behaviour of clay and sand", Mech. Res. Commun., 34(2), 97-114. https://doi.org/10.1016/j.mechrescom.2006.06.010

피인용 문헌

  1. An Elasto-Plastic Damage Model for Rocks Based on a New Nonlinear Strength Criterion 2018, https://doi.org/10.1007/s00603-018-1417-1
  2. A simple anisotropic bounding surface model for saturated clay considering the cyclic degradation pp.2116-7214, 2020, https://doi.org/10.1080/19648189.2018.1549509
  3. Experimental study on the consolidation of saturated silty clay subjected to cyclic thermal loading vol.12, pp.4, 2016, https://doi.org/10.12989/gae.2017.12.4.707
  4. Application of a modified structural clay model considering anisotropy to embankment behavior vol.13, pp.1, 2016, https://doi.org/10.12989/gae.2017.13.1.079
  5. Analytical solution and experimental study of membrane penetration in triaxial test vol.13, pp.6, 2016, https://doi.org/10.12989/gae.2017.13.6.1027
  6. Geometrical parameters optimizations of scarf and double scarf bounded joint vol.5, pp.3, 2016, https://doi.org/10.12989/aas.2018.5.3.401
  7. Compression and shear responses of structured clays during subyielding vol.18, pp.2, 2016, https://doi.org/10.12989/gae.2019.18.2.121