DOI QR코드

DOI QR Code

Theoretical solutions for displacement and stress of a circular opening reinforced by grouted rock bolt

  • Zou, Jin-Feng (School of Civil Engineering, Central South University) ;
  • Xia, Zhang-Qi (School of Civil Engineering, Central South University) ;
  • Dan, Han-Cheng (School of Civil Engineering, Central South University)
  • 투고 : 2015.07.08
  • 심사 : 2016.05.14
  • 발행 : 2016.09.25

초록

This paper presented solutions of displacement and stress for a circular opening which is reinforced with grouted rock bolt. It satisfies the Mohr-Coulomb (M-C) or generalized Hoek-Brown (H-B) failure criterion, and exhibits elastic-brittle-plastic or strain-softening behavior. The numerical stepwise produce for strain-softening rock mass reinforced with grouted rock bolt was developed with non-associative flow rules and two segments piecewise linear functions related to a principle strain-dependent plastic parameter, to model the transition from peak to residual strength. Three models of the interaction mechanism between grouted rock bolt and surrounding rock proposed by Fahimifar and Soroush (2005) were adopted. Based on the axial symmetrical plane strain assumption, the theoretical solution of the displacement and stress were proposed for a circular tunnel excavated in elastic-brittle-plastic and strain-softening rock mass compatible with M-C or generalized H-B failure criterion, which is reinforced with grouted rock bolt. It showed that Fahimifar and Soroush's (2005) solution is a special case of the proposed solution for n = 0.5. Further, the proposed method is validated through example comparison calculated by MATLAB programming. Meanwhile, some particular examples for M-C or generalized H-B failure criterion have been conducted, and parametric studies were carried out to highlight the influence of different parameters (e.g., the very good, average and very poor rock mass). The results showed that, stress field in plastic region of surrounding rock with considering the supporting effectiveness of the grouted rock bolt is more than that without considering the effectiveness of the grouted rock bolt, and the convergence and plastic radius are reduced.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Ahmad, F. and Hamed, S. (2005), "A theoretical approach for analysis of the interaction between grouted rock bolt and rock masses", Tunn. Undergr. Space Technol., 20(4) 333-343. https://doi.org/10.1016/j.tust.2004.12.005
  2. Brown, E.T., Bray, J.W., Ladanyi, B. and Hoek, E. (1983), "Ground response curves for rock tunnels", J. Geotech. Eng., 109(1), 15-39. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:1(15)
  3. Bobet, A. and Einstein, H.H. (2011), "Tunnel reinforcement with rockbolts", Tunn. Undergr. Space Technol., 26(1), 100-123. https://doi.org/10.1016/j.tust.2010.06.006
  4. Carranza-Torres, C. (2009), "Analytical and numerical study of the mechanics of rockbolt reinforcement around tunnels in rock masses", Rock Mech. Rock Eng., 42(2), 175-228. https://doi.org/10.1007/s00603-009-0178-2
  5. Cai, Y., Esaki, T. and Jiang, Y. (2004a), "A rock bolt and rock mass interaction model", International J. Rock Mech. Min. Sci., 41(7), 1055-1067. https://doi.org/10.1016/j.ijrmms.2004.04.005
  6. Cai, Y. (2004b), "A study of rock bolting design in soft rock", Int. J. Rock Mech. Min. Sci., 41(3), 545-550. https://doi.org/10.1016/j.ijrmms.2003.12.135
  7. Cai, Y., Esaki, T. and Jiang, Y. (2004c), "An analytical model to predict axial load in grouted rock bolt for soft rock tunneling", Tunn. Undergr. Space Technol., 19(6), 607-618. https://doi.org/10.1016/j.tust.2004.02.129
  8. Dan, H.C., He, L.H., Zhao, L.H. and Chen, J.Q. (2015), "Coupled hydro-mechanical response of saturated asphalt pavement under moving traffic load", Int. J. Pavement Eng., 16(2), 125-143. https://doi.org/10.1080/10298436.2014.937712
  9. Fahimifar, A. and Soroush, H. (2005), "A theoretical approach for analysis of the interaction between grouted rockbolts and rock masses", Tunn. Undergr. Space Technol., 20(4), 333-343. https://doi.org/10.1016/j.tust.2004.12.005
  10. Li, C. and Stillborg, B. (1999), "Analytical models for rock bolts", Int. J. Rock Mech. Min. Sci., 36(36), 1013-1029. https://doi.org/10.1016/S1365-1609(99)00064-7
  11. Ma, S., Nemcik, J. and Aziz, N. (2013), "An analytical model of fully grouted rock bolts subjected to tensile load", Construct. Build. Mater., 49(1), 519-526. https://doi.org/10.1016/j.conbuildmat.2013.08.084
  12. Osgoui, R.R. and Oreste, P. (2010), "Elasto-plastic analytical model for the design of grouted bolts in a Hoek-Brown medium", Int. J. Numer. Anal. Method. Geomech., 34(16), 1651-1686.
  13. Pan, Q. and Dias, D. (2015), "Face stability analysis for a shield-driven tunnel in anisotropic and nonhomogeneous soils by the kinematical approach", Int. J. Geomech., 04015076.
  14. Pan, Q. and Dias, D. (2016), "The effect of pore water pressure on tunnel face stability", Int. J. Numer. Anal. Method. Geomech.
  15. Park, K.H., Tantayopin, K., Tontavanich, B. and Owatsiriwong, A. (2009), "Analytical solution for seismicinduced ovaling of circular tunnel lining under no-slip interface conditions: A revisit", Tunn. Undergr. Space Technol., 24(2), 231-235. https://doi.org/10.1016/j.tust.2008.07.001
  16. Serrano, A. and Olalla, C. (1999), "Tensile resistance of rock anchors", Int. J. Rock Mech. Min. Sci., 36(4), 449-474.
  17. Sharan, S.K. (2003), "Elastic-brittle-plastic analysis of circular openings in hoek-brown media", Int. J. Rock Mech. Min. Sci., 40(40), 817-824. https://doi.org/10.1016/S1365-1609(03)00040-6
  18. Sharan, S.K. (2005), "Exact and approximate solutions for displacements around circular openings in elastic-brittle-plastic hoek-brown rock", Int. J. Rock Mech. Min. Sci., 42(4), 542-549. https://doi.org/10.1016/j.ijrmms.2005.03.019
  19. Sharan, S.K. (2008), "Analytical solutions for stresses and displacements around a circular opening in a generalized hoek-brown rock", Int. J. Rock Mech. Min. Sci., 45(1), 78-85. https://doi.org/10.1016/j.ijrmms.2007.03.002
  20. Showkati, A., Maarefvand, P. and Hassani, H. (2015), "Theoretical determination of stress around a tensioned grouted anchor in rock", Geomech. Eng., Int. J., 8(3), 441-460. https://doi.org/10.12989/gae.2015.8.3.441
  21. Shin, Y.J., Song, K.I., Lee, I.M. and Cho, G.C. (2011), "Interaction between tunnel supports and ground convergence-consideration of seepage forces", Int. J. Rock Mech. Min. Sci., 48(3), 394-405. https://doi.org/10.1016/j.ijrmms.2011.01.003
  22. Wang, S., Yin, X., Tang, H. and Ge, X. (2010), "A new approach for analyzing circular tunnel in strainsoftening rock masses", Int. J. Rock Mech. Min. Sci, 47(1), 170-178. https://doi.org/10.1016/j.ijrmms.2009.02.011
  23. Wang, S., Wu, Z., Guo, M. and Ge, X. (2012), "Theoretical solutions of a circular tunnel with the influence of axial in situ stress in elastic-brittle-plastic rock", Tunn. Undergr. Space Technol., 30, 155-168. https://doi.org/10.1016/j.tust.2012.02.016
  24. Zou, J. and Li, S. (2015a), "Theoretical solution for displacement and stress in strain-softening surrounding rock under hydraulic-mechanical coupling", Sci. China Technol. Sci., 58(8), 1401-1413. https://doi.org/10.1007/s11431-015-5885-1
  25. Zou, J.F. and Yu, S. (2015b), "Theoretical solutions of a circular tunnel with the influence of the out-ofplane stress based on the generalized hoek-brown failure criterion", Int. J. Geomech., 16(3), 06015006.
  26. Zou, J.F. and He, Z. (2016), "Numerical approach for strain-softening rock with axial stress", Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, pp. 1-15.
  27. Zou, J.F., Li, S.S., Xu, Y., Dan, H.C. and Zhao, L.H. (2016), "Theoretical solutions for a circular opening in an elastic-brittle-plastic rock mass incorporating the out-of-plane stress and seepage force", Ksce J. Civil Eng., 20(2), 687-701. https://doi.org/10.1007/s12205-015-0789-y

피인용 문헌

  1. Study on Dynamic Mechanical Properties of Limestone under Uniaxial Impact Compressive Loads vol.2016, 2016, https://doi.org/10.1155/2016/5207457
  2. A new procedure for ground response curve (GRC) in strain-softening surrounding rock vol.89, 2017, https://doi.org/10.1016/j.compgeo.2017.04.009
  3. Influence of stress anisotropy on the cylindrical cavity expansion in undrained elastic-perfectly plastic soil 2017, https://doi.org/10.1007/s11431-017-9127-7
  4. Shear Behaviors of the Binary Structural Plane 2017, https://doi.org/10.1007/s10706-017-0366-x
  5. A new approach for the quasi-plane strain-softening problem of cylindrical cavity expansion based on Cam-Clay model vol.31, pp.3, 2017, https://doi.org/10.1007/s12206-017-0230-1
  6. Safety factor assessment of a tunnel face reinforced by horizontal dowels vol.142, 2017, https://doi.org/10.1016/j.engstruct.2017.03.056
  7. Protecting highway bridges against debris flows using lateral berms: a case study of the 2008 and 2011 Cheyang debris flow events, China vol.9, pp.1, 2018, https://doi.org/10.1080/19475705.2017.1414718
  8. An efficient reliability method combining adaptive Support Vector Machine and Monte Carlo Simulation vol.67, 2017, https://doi.org/10.1016/j.strusafe.2017.04.006
  9. Simplified Approach for Settlement Analysis of Vertically Loaded Pile vol.143, pp.11, 2017, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001334
  10. Seismic and Static Stability Analysis for 3D Reinforced Slope in Nonhomogeneous and Anisotropic Soils vol.18, pp.7, 2018, https://doi.org/10.1061/(ASCE)GM.1943-5622.0001177
  11. Seismic and Static 3D Stability of Two-stage Slope Considering Joined Influences of Nonlinearity and Dilatancy pp.1976-3808, 2018, https://doi.org/10.1007/s12205-018-0636-z
  12. An improved numerical approach in surrounding rock incorporating rockbolt effectiveness and seepage force vol.13, pp.3, 2018, https://doi.org/10.1007/s11440-018-0635-8
  13. A new approach for the cylindrical cavity expansion problem incorporating deformation dependent of intermediate principal stress vol.12, pp.3, 2016, https://doi.org/10.12989/gae.2017.12.3.347
  14. Influences of seepage force and out-of-plane stress on cavity contracting and tunnel opening vol.13, pp.6, 2016, https://doi.org/10.12989/gae.2017.13.6.907
  15. An improved radius-incremental-approach of stress and displacement for strain-softening surrounding rock considering hydraulic-mechanical coupling vol.16, pp.1, 2018, https://doi.org/10.12989/gae.2018.16.1.059
  16. A numerical stepwise approach for cavity expansion problem in strain-softening rock or soil mass vol.18, pp.3, 2016, https://doi.org/10.12989/gae.2019.18.3.225
  17. An improved model of compaction grouting considering three-dimensional shearing failure and its engineering application vol.19, pp.3, 2019, https://doi.org/10.12989/gae.2019.19.3.217
  18. Investigating the supporting effect of rock bolts in varying anchoring methods in a tunnel vol.19, pp.6, 2019, https://doi.org/10.12989/gae.2019.19.6.485
  19. A New Semi-Analytical Method for Elasto-Plastic Analysis of a Deep Circular Tunnel Reinforced by Fully Grouted Passive Bolts vol.10, pp.12, 2016, https://doi.org/10.3390/app10124402
  20. Undrained solution for cavity expansion in strength degradation and tresca soils vol.21, pp.6, 2016, https://doi.org/10.12989/gae.2020.21.6.527
  21. Mechanical properties and reinforcement effect of jointed rock mass with pre-stressed bolt vol.27, pp.12, 2020, https://doi.org/10.1007/s11771-020-4469-9