대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

  • 제32권8호
  • /
  • Pages.19-26
  • /
  • 2016
  • /
  • 1226-9107(pISSN)
  • /
  • 2384-1788(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

스트럿-타이 모델 설계법을 적용한 구조 BIM의 자동철근배근 시스템 개발에 관한 연구

Development of Automatic Rebar Placement System of Structural BIM applied Strut and Tie Model Design

  • 조영상 (한양대학교 건축학부) ;
  • 장현석 (한양대학교 일반대학원 첨단건축도시환경공학과) ;
  • 정근석 (한양대학교 일반대학원 건축시스템공학과)
  • 투고 : 2016.05.30
  • 심사 : 2016.08.13
  • 발행 : 2016.08.30
⟨ 이전 논문 다음 논문 ⟩

초록

Research about development of Automatic Rebar Placement System applied Strut-Tie model is conducted. Existing Structural BIM related research, Rebar Placement on structural member of which stress change linearly is carried out, but in this research, problem of complicated and repeated calculation process of Strut-Tie Design Method, a calculation method to design disturbed region by analyzing the work of precedent researchers, is understood, the following potential problem is being suggested and solution of this problem approached from BIM standpoint is suggested. For the solution of such problems, Automatic Placement of Structural BIM was suggested in this study, and it is considered that if Structural BIM is brought in to when Strut-Tie model design about Deep Beams, a structural member disturbed region, is progressed, time for Structural Document Stage can be saved and especially in the case of design method with complicated design process, the effect is considered to be huge. Furthermore, calculated value, designed in Strut-Tie form that suits stress path through finite element analysis about disturbed region and structural BIM research that reflects this, it would be much efficient in designing disturbed region.

키워드

과제정보

연구 과제 주관 기관 : 한국연구재단

참고문헌

  1. Yeo, D. (2009). Development of web-based visual tool for strut-and-tie models, Thesis, Seoul National University.
  2. Kim, Y. (2010). Development of automatic reinforcement placing system for RC structures based on structural BIM, Thesis, Hanyang University.
  3. Jeung, C. (2006). Development of Indeterminate Strut-Tie Model for Design of Reinforced Concrete Deep Beams, Thesis, Kyungpook National University.
  4. Yang, G., Eun, H., & Chung, H. (2001). Comparison of Deep Beam Test Results with Present Shear Design Codes, Journal of the Architectural Institute of Korea, Structure & Construction, 17(8), 19-26.
  5. Yang, K. (2001). An Evaluation of The Shear Strength of Reinforced High-Strength Concrete Deep Beam, Thesis, Chung Ang University.
  6. Noh, S. (2001). Determination of strut-tie model using evolutionary structural optimization, Thesis, Korea Advanced Institute of Science and Technology
  7. Kim, W. (2007). Web-based Preliminary Design Tool for Strut-and-Tie Models of Diaphragm Slabs, Thesis, Seoul National University.
  8. Kim, N., Hong, S., & Yeo, D. (2008). Development of Visual Tools for Strut-Tie Model, Computational Structural Engineering Institute of Korea.
  9. Lee, S. (2001). Development of user interface program for analysis of nonlinear strut-tie model, Thesis, Pusan National University.
  10. Lee, M. (2000). Development of User Interface Program for Analysis of Strut-Tie Model, Thesis, Pusan National University.
  11. Lee, M., & Noh, S. (2007). Applicability Improvement of Strut-Tie Model for RC Deep Beam Design, Journal of the Architectural Institute of Korea, Structure & Construction, 23(9), 107-114.
  12. Uy Lymei, (2014). Design comparison of strut-and-tie model and ACI traditional, Thesis, Konyang University.
  13. Park, J., Kim, S., Yun, Y., Tjen, T., & Daniel, K. (2007). Development of Integrated STM Design and Nonlinear FEA Environment for Design of Disturbed Region of Concrete Structure, Korea Society of Civil Engineers Conference.
  14. Kristian, A. (2012). Geometry Design Automation, Link Oping Studies in Science and Technology, Dissertation, NO. 1418.
  15. Cho, Y., Jin, H., Jang, H., & Hong, S. (2014). A Study on the Establishment of the Automatic Rebar Placement System for Reinforced Concrete Mat Foundation based on S-BIM, Journal of the Architectural Institute of Korea, Structure & Construction, 30(4), 27-34. https://doi.org/10.5659/JAIK_SC.2014.30.4.027
  16. Jang, J. (2013). Development of Rebar Placement System of R.C Foundation using Lean Design Technique based on Structural BIM (S-BIM), Thesis, Hanyang University.
  17. Kim, S. (2014). Reinforced Concrete Structural Design 5th, Munundang.
  18. ACI Committee 318, (2014). Building Code Requirements for Structural Concrete (ACI 318M-14) and Commentary (ACI 318RM-14), American Concrete Institute.
  19. Michael, D., & Oguzhan, B. (2008). Design of Deep Beams Using Strut-and-Tie Models-Part1:Evaluating U.S Provisions, ACI Structural Journal, V.105 No.4.
  20. Zaslavsky, A. (1982) A Note on Saint Venant's Principle, Israel Journal of Technology, V.20.