DOI QR코드

DOI QR Code

Design of Two-axis Force/Torque Sensor for Hip Joint Rehabilitation Robot

고관절 재활로봇의 2축 힘/토크센서 설계

  • Kim, Han-Sol (Department of Control and Instrumentation Engineering/ERI, Gyeongsang National University) ;
  • Kim, Gab-Soon (Department of Control and Instrumentation Engineering/ERI, Gyeongsang National University)
  • 김한솔 (경상대학교 제어계측공학과, ERI) ;
  • 김갑순 (경상대학교 제어계측공학과, ERI)
  • Received : 2016.04.11
  • Accepted : 2016.06.02
  • Published : 2016.07.01

Abstract

We describe the design and fabrication of a two-axis force/torque sensor with parallel-plate beams (PPBs) and single beams for measuring force and torque in hip-joint rehabilitation exercise using a lower rehabilitation robot. The two-axis force/torque sensor is composed of an Fz force sensor and a Tz torque sensor, which detect z direction force and z direction torque, respectively. The two-axis force/torque sensor was designed using the FEM (Finite Element Method) and manufactured using strain gages. The characteristics experiment of the two-axis force/torque sensor was carried out. The test results show that the interference error of the two-axis force/torque sensor was less than 0.64% and the repeatability error and the non-linearity of the two-axis force/torque sensor were less than 0.03%. It is thought that the developed two-axis force/torque sensor could be used for a lower rehabilitation robot.

Keywords

References

  1. J. F. Zhang, Y. M. Dong, C. J. Yang, Y. Geng, Y. Chen, and T. Yang, "5-Link model based gait trajectory adaption control strategies of the gait rehabilitation exoskeleton for post-stroke patients," Mechatronics, no. 20, pp. 368-376, 2010.
  2. E. Akdogan and M.A. Adli, "The design and control a therapeutic exercise robot for lower limb rehabilitation : Physiotherabot," Mechatronics, no. 21, pp. 509-522, 2011.
  3. S. Mefoued, "A robust adaptive neural control scheme to drive an actuated orthosis for assistance of knee movements," Neurocomputing, no. 140, pp. 27-40, 2014.
  4. H. Yu, S. Huang, G. Chen, and N. Thakor, "Control design of a novel compliant actuator for rehabilitation robots," Mechatronics, no. 23, pp. 1072-1083, 2013.
  5. K. Nagai, Y. Ito, M. Yazaki, K. Higuchi, and S. Abe, "Development of a small Six-component force/torque sensor based on the double-cross structure," Journal of the Robotics Society of Japan, vol. 22, no. 3, pp. 361-369, 2004. https://doi.org/10.7210/jrsj.22.361
  6. H. M. Kim, J. W. Yoon, and G. S. Kim, "Development of a sixaxis force/moment sensor for a spherical-type finger force measuring system," IET Science, Measurement and Technology, vol. 6, pp. 96-104, 2012.
  7. G. S. Kim, "Development of a six-axis force/moment sensor with rectangular taper beams for an intelligent robot," International Journal of Control, Automation, and Systems, vol. 5, no. 4, pp. 419-428, 2007.
  8. K. J Lee and G. S. Kim, "Design of Structure of four-axis force/torque sensor with parallel step plate beams," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 20 no. 11, pp. 1147-1152, 2014. https://doi.org/10.5302/J.ICROS.2014.14.0082
  9. J. J. Park and G. S. Kim, "Development of the 6-axis force/moment sensor for an intelligent robot's gripper," Sensors and Actuators A, vol. 118, pp. 127-134, 2005. https://doi.org/10.1016/S0924-4247(04)00538-2
  10. ATI Industrial Automation, Multi-axis Forcre/torque Sensor, ATI Industrial Automation, pp. 4-45, 2014.
  11. G. S. Kim and J. W. Yoon, "Development of calibration system for multi-axis force/moment sensor and its uncertainty evaluation," Korean Society Precision Engineering, vol. 24, no. 10, pp. 91-98, 2007.