DOI QR코드

DOI QR Code

Field testing and numerical modeling of a low-fill box culvert under a flexible pavement subjected to traffic loading

  • Acharya, Raju (Engineering & Testing Services, Inc.) ;
  • Han, Jie (Department of Civil, Environmental, & Architectural Engineering, The University of Kansas) ;
  • Parsons, Robert L. (Department of Civil, Environmental, & Architectural Engineering, The University of Kansas) ;
  • Brennan, James J. (Kansas Department of Transportation)
  • 투고 : 2015.08.30
  • 심사 : 2016.06.18
  • 발행 : 2016.11.25

초록

This paper presents field study and numerical modeling results for a single-cell low-fill concrete box culvert under a flexible pavement subjected to traffic loading. The culvert in the field test was instrumented with displacement transducers to capture the deformations resulting from different combinations of static and traffic loads. A low-boy truck with a known axle configuration and loads was used to apply seven static load combinations and traffic loads at different speeds. Deflections under the culvert roof were measured during loading. Soil and pavement samples were obtained by drilling operation on the test site. The properties of the soil and pavement layers were determined in the laboratory. A 3-D numerical model of the culvert was developed using a finite difference program FLAC3D. Linear elastic models were used for the pavement layers and soil. The numerical results with the material properties determined in the laboratory were compared with the field test results. The observed deflections in the field test were generally smaller under moving loads than static loads. The maximum deflections measured during the static and traffic loads were 0.6 mm and 0.41 mm respectively. The deflections computed by the numerical method were in good agreement with those observed in the field test. The deflection profiles obtained from the field test and the numerical simulation suggest that the traffic load acted more like a concentrated load distributed over a limited area on the culvert. Elastic models for culverts, pavement layers, and surrounding soil are appropriate for numerical modeling of box culverts under loading for load rating purposes.

키워드

과제정보

연구 과제 주관 기관 : Kansas Department of Transportation (KDOT)

참고문헌

  1. Abdel-Karim, A.M., Tadros, M.K. and Benak, J.V. (1990), "Live load distribution on concrete box culverts", Transportation Research Record No. 1288; Transportation Research Board of National Academics, Washington, D.C., USA, pp. 136-151.
  2. Abdel-Karim, A.M., Tadros, M.K. and Benak, J.V. (1993), "Structural response of full-scale concrete box culvert", J. Struct. Eng., 119(11), 3238-3254. DOI: 10.1061/(ASCE)0733-9445(1993)119:11(3238)
  3. Acharya, R. (2012), "Improved Load Distribution for Load Rating of Low-fill Box Structures", M.S. Thesis; University of Kansas, Lawrence, KS, USA.
  4. Acharya, R., Han, J., Brennan, J., Parsons, R. and Khatri, D. (2014), "Structural response of a low-fill box culvert under static and traffic loading", J. Perform. Constr. Facil., 30(1), 04014184. DOI: 10.1061/(ASCE)CF.1943-5509.0000690
  5. American Association of State Highway and Transportation Officials (AASHTO) (1993), Guide for Design of Pavement Structures, Washington D.C., USA.
  6. American Association of State Highway and Transportation Officials (AASHTO) (2011), The manual for bridge evaluation, Washington D.C., USA.
  7. Bloomquist, D.G. and Gutz, A.J. (2002), "Design live loads on box structures", Rep. No. BC 354; RPWO # 47-Part 2, University of Florida, Gainesville, FL, USA.
  8. Bryden P., Naggar, H.E. and Valsangkar, A. (2014), "Soil-structure interaction of very flexible pipes: Centrifuge and numerical investigations", Int. J. Geomech., 15(6), 04014091. DOI: 10.1061/(ASCE)GM.1943-5622.0000442
  9. Cakir, T. (2014), "Backfill and subsoil interaction effects on seismic behavior of a cantilever wall", Geomech. Eng., Int. J., 6(2), 117-138. https://doi.org/10.12989/gae.2014.6.2.117
  10. Dezfooli, M.S., Abolmaali, A. and Razavi, M. (2014), "Coupled nonlinear finite-element analysis of soilsteel pipe structure interaction", Int. J. Geomech., 15(1), 04014032. DOI: 10.1061/(ASCE)GM.1943-5622.0000387
  11. Fatahi, B., Tabatabaiefar, S.H.R. and Samali, B. (2014), "Soil-structure interaction vs site effect for seismic design of tall buildings on soft soil", Geomech. Eng., Int. J., 6(3), 293-320. https://doi.org/10.12989/gae.2014.6.3.293
  12. James, R.W. and Brown, D.E. (1987), "Wheel load induced earth pressures on box culverts", Transportation Research Record 1129; Transportation Research Board of the National Academics, Washington, D.C., USA, pp. 55-62.
  13. Kang, J., Parker, F., Kang, Y.J. and Yoo, C. (2008), "Effects of frictional forces acting on sidewalls of buried box culverts", Int. J. Numer. Anal. Methods Geomech., 32(3), 289-306. https://doi.org/10.1002/nag.628
  14. Kansas Department of Transportation (2011), Design manual, Volume III-Bridge section.
  15. Kim, K. and Yoo, C.H. (2005), "Design loading on deeply buried box culverts", J. Geotech. Geoenviron. Eng., 131(1), 20-27. DOI: 10.1061/(ASCE)1090-0241(2005)131:1(20)
  16. Lawson, W.D., Wood, T.A., Newhouse, C.D. and Jayawcikrama, P.W. (2009), Culvert Rating Guide; Texas Department of Transportation.
  17. Lawson, W.D., Wood, T.A., Newhouse, C.D. and Jayawcikrama, P.W. (2010), Evaluating Existing Culverts for Load Capacity Allowing for Soil-structure Interaction, Rep. No. 0-5849-1; Texas Department of Transportation.
  18. Lees, A.S. and Richards, D.J. (2011), "Centrifuge modelling of temporary roadway systems subject to rolling type loading", Geomech. Eng., Int. J., 3(1), 45-59. https://doi.org/10.12989/gae.2011.3.1.045
  19. Livaoglu, R. (2013), "Soil interaction effects on sloshing response of the elevated tanks", Geomech. Eng., Int. J., 5(4), 283-000. https://doi.org/10.12989/gae.2013.5.4.283
  20. McGrath, T.J., Liepins, A.A. and Beaver, J.L. (2005), "Live load distribution widths for reinforced concrete box sections", Transportation Research Record; Transportation Research Board of the National Academics, Washington, D.C., USA, pp. 99-108.
  21. Nagy, N., Mohamed, M. and Boot, J.C. (2010), "Nonlinear numerical modelling for the effects of surface explosions on buried reinforced concrete structures", Geomech. Eng., Int. J., 2(1), 1-18. https://doi.org/10.12989/gae.2010.2.1.001
  22. National Cooperative Highway Research Program (NCHRP) (2010), Recommended design specifications for live load distribution to buried structures, Report No. 647; Transportation Research Board, Washington D.C., USA, 75 p.
  23. Sanford, T.C. (2010), Soil-structure interaction of buried structures, A2K04: Committee on Subsurface Soil-Structure Interaction, University of Maine, 6 p.
  24. Sawamura, Y., Kishida, K. and Kimura, M. (2014), "Centrifuge model test and FEM analysis of dynamic interactive behavior between embankments and installed culverts in multiarch culvert embankments", Int. J. Geomech., 15(3), 04014050. DOI: 10.1061/(ASCE)GM.1943-5622.0000361
  25. Sun, L., Hopkins, T.C. and Beckham, T.L. (2011), "Long-term monitoring of culvert load reduction using an imperfect ditch backfilled with geofoam", Transportation Research Record; 2212, Transportation Research Board of the National Academics, Washington, D.C., USA, pp. 56-64.
  26. Tadros, M.K., Benak, J.V. and Gilliland, M.K. (1987), "Soil pressure on box culverts", ACI Struct. J., 86(4), 439-450.
  27. Yoo, C.H., Parker, F. and Kang, J. (2005), Bedding and fill heights for concrete roadway pipe and box culverts, Research report; Highway Research Center, Auburn University, AL, USA.

피인용 문헌

  1. Performance of steel-reinforced high-density polyethylene pipes in soil during installation: a numerical study vol.15, pp.4, 2020, https://doi.org/10.1007/s11440-019-00822-w
  2. Friction coefficient and stress-strain on a soil-buried box culvert jacking in highway construction vol.23, pp.9, 2016, https://doi.org/10.1177/1369433220901819