DOI QR코드

DOI QR Code

Dynamic behaviors of viscous damper on concrete archaized building with lintel-column joint

  • Xue, Jianyang (School of Civil Engineering, Xi' an University of Architecture and Technology) ;
  • Dong, Jinshuang (School of Civil Engineering, Xi' an University of Architecture and Technology) ;
  • Sui, Yan (School of Civil Engineering, Xi' an University of Architecture and Technology)
  • Received : 2016.07.09
  • Accepted : 2017.01.04
  • Published : 2017.10.25

Abstract

In order to analyze the vibration control effect of viscous damper in the concrete archaized buildings with lintel-column joints under seismic action, 3 specimens were tested under dynamic excitation. Two specimens with viscous damper were defined as the controlled component and one specimen without viscous damper was specified as the non-controlled component. The loading process and failure patterns were obtained from the test results. The failure characteristics, skeleton curves and mechanical behavior such as the load-displacement hysteretic loops, load carrying capacity, degradation of strength and rigidity, ductility and energy dissipation of the joints were analyzed. The results indicate that the load-bearing capacity of the controlled component is significantly higher than that of the non-controlled component. The former component has an average increase of 27.4% in yield load and 22.4% in ultimate load, respectively. Meanwhile, the performance of displacement ductility and the ability of energy dissipation for the controlled component are superior to those of the non-controlled component as well. Compared with non-controlled component, equivalent viscous damping coefficients are improved by 27.3%-30.8%, the average increase is 29.0% at ultimate load for controlled component. All these results reflect that the seismic performance of the controlled component is significantly better than that of the non-controlled component. These researches are helpful for practical application of viscous damper in the concrete archaizing buildings with lintel-column joints.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Xi'an University of Architecture and Technology

References

  1. Abdi, H., Hejazi, F., Saifulnaz, R., Karim, I.A. and Jaafar, M.S. (2015), "Response modification factor for steel structure equipped with viscous damper device", J. Steel Struct., 15(3), 605-622. https://doi.org/10.1007/s13296-015-9008-4
  2. Elnashai, A.S., Broderick, B.M. and Dowling, P.J. (1995), "Earthquake-resistant composite steel/concrete structures", Struct. Eng., 73, 121-121.
  3. GB 50011 (2010), Code for Seismic Design of Buildings, Ministry of Housing and Urban-Rural Development, Beijing, China
  4. GB/T 17742 (2008), The Chinese Seismic Intensity Scale, Ministry of Housing and Urban-Rural Development, Beijing, China.
  5. Gosain, N.K., Jirsa, J.O. and Brown, R.H. (1977), "Shear requirements for load reversals on RC members", J. Struct. Div., 103(7), 1461-1476.
  6. Han, L.H. (2007), CFST Structure: Theory and Practice, Science Press, Beijing, China.
  7. Housner, G.W., Bergman, L., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F. and Yao, J.T. (1997), "Structural control: past, present, and future", J. Eng. Mech., 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
  8. JGT 209 (2012), Dampers for Vibration Energy Dissipation of Buildings, Ministry of Housing and Urban-Rural Development, Beijing, China.
  9. Li, P. (2014), "Experimental study on seismic behavior of RC column-beam joint built in traditional style", M.Sc. Dissertation, Xi'an University of Architecture & Technology, Xi'an, China.
  10. Parmar, A., Patel, V., Kotak, B. and Patel, M. (2014), "Seismic response control of asymmetric building using VISCOUS DAMPER", J. Civil Eng. Technol., 5(12), 267-276.
  11. Sivaselvan, M.V. and Reinhorn, A.M. (2000), "Hysteretic models for deteriorating inelastic structures", J. Eng. Mech., 126(6), 633-640. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:6(633)
  12. Song, J.K. and Pincheira, J. (2000), "Spectral displacement demands of stiffness-and strength-degrading systems", Earthq. Spectr., 16(4), 817-851. https://doi.org/10.1193/1.1586141
  13. Song, Z.B. (2001), "The application of viscous damping energy consumption technology in structural seismic strengthening", M.Sc. Dissertation, China Academy of Building Research, Beijing, China.
  14. Tian, Y.F. (2012), Building Construction of Chinese Imitated Ancient Building, Chemical Industry Press, Beijing, China.
  15. Wang, C.X., Xu, K. and Tian, L.Q. (2011), "Structure design of mingtang for protection of the ruins of ancient buildings built in the Sui and Tang Dynasty in Luoyang City", Steel Constr., 26(8), 26-31.
  16. Xie, L. (2006), "Study on application of imitations of traditional Chinese architecture in landscape architecture", M.Sc. Dissertation, Zhejiang A&F University, Hangzhou, China.
  17. Xie, Q.F., Li, P., Ge, H.P., Sui, Y. and Wu, K. (2015), "Experimental study on seismic behavior of RC column-beam joint built in traditional style", World Earthq. Eng., 31(4), 150-158.
  18. Xue, J.Y., Wu, Z.J., Sui, Y. and Liu, Z.Q. (2015), "Experimental study on seismic performance of steel double-beams column exterior joints in antique style building", J. Build. Struct., 36(3), 80-89.
  19. Xue, J.Y., Wu, Z.J., Sui, Y., Ge, H.P. and Wu, K. (2016), "Experimental study and numerical analysis on aseismic performance of steel double-beam-column interior-joints in traditional style building", Eng. Mech., 33(5), 97-105.
  20. Zheng, Z.C., Moritaka, H. and Shimoda, K. (2006), "The seismic retrofit of the Kagoshima airport terminal building-the 3D inelastic analysis of the structure with viscous damper walls", Build. Struct., 30(6), 19-26.
  21. Zhu, D.S., Li, X. and Chang, S. (2014), "Seismic response control of viscous damper on concrete-filled steel tubular frame Piers", J. Chongqing Jiaotong Univ., 33(4), 1-6.