DOI QR코드

DOI QR Code

A Study on the characteristic analysis and optimization according to Ballast design of Induction Lamp

고출력 무전극램프의 점등회로 설계를 통한 특성분석 및 최적화에 관한 연구

  • Chung, Young-Il (Department of Information and TeleCommunication Engineering, Wonkwang University) ;
  • Jung, Dae-Chul (Department of Information and TeleCommunication Engineering, Wonkwang University) ;
  • Park, Dae-Hee (Department of Information and TeleCommunication Engineering, Wonkwang University) ;
  • Kim, Yong-Kab (Department of Information and TeleCommunication Engineering, Wonkwang University)
  • Received : 2017.01.12
  • Accepted : 2017.02.20
  • Published : 2017.02.28

Abstract

In this paper, we implemented for the development of a high output induction lamp system, which lamp design is optimized by gas type, mixing ratio, pressure and discharge tube size, amalgam type and mixing ratio, and characteristics of ferrite core in the lamp. It's the circuit design by improving the power factor and efficiency according to the driving method, which has analyzing the characteristics according to the waveform and frequency. Finally, luminaries design part for applying the optimal lighting system considering the surrounding environment, the characteristics of the lighting circuit for electrodeless lamp has analyzed and the improvement has been proceeded. In conclusion, the driving frequency has optimized at 135kHz with degrading $7{\sim}10^{\circ}C$ based on the results of the optical characteristics of the induction lamp on peak noise FET(Q3,Q4) damage.

본 논문에서는 고출력 무전극 램프 시스템 개발에서 램프 내에 가스종류, 혼합비, 압력과 방전관 사이즈, 아말감종류 및 혼합비, 페라이트코어의 특성등의 최적화를 통한 램프 설계 부분을 연구하였다. 또한 구동방식에 따른 점등회로의 역율 및 효율개선, 파형이나 인가 주파수에 따른 특성 분석을 통한 점등회로설계 부분 등을 고려하였으며, 최종적으로 주변 환경을 고려 무전극 등기구 설계를 수행 하였다. 고출력 무전극 램프용 점등회로의 설계를 통한 특성분석을 진행하여 개선 보완을 통하여 효울을 향상 시켰으며 점등회로의 구동주파수에 따른 무전극 램프의 광학적 특성 및 시스템 영향을 확인한 결과, $7{\sim}10^{\circ}C$ 정도 낮은 특성의 135kHz로 구동하는 점등회로를 최적화하였다. 실험적으로 Peak Noise 발생으로 인한 FET(Q3,Q4) demage 현상을 개선하였다. 최종적으로 무전극램프용 점등회로 최종 설계도을 통해 약 2~3배 이상의 수명을 확보함으로써 안정기의 신뢰성 및 무전극 램프 시스템의 효율이 높음을 알 수 있었다.

Keywords

References

  1. Michio Takagaki, Takeshi Fukuyo, Shinchi Irisawa, "Mercury-Free Arc Tube for a Discharge," US Patent, No. 7,170,230,B2, 2007.
  2. Hyun-seob Cho, "The study of induction heating apparatus with high efficiency" Journal of korea institute of information electronics and communication technology, Vol. 9, No. 2, pp185-189, Apr. 2016. https://doi.org/10.17661/jkiiect.2016.9.2.185
  3. Ui-hyo Jeong, Jae-phil Hyung, "High Temperature Reliability Study of Low Frequency In-door Electrodeless Lamp", The Korean Reliability Society, Journal of Applied Reliability Vol.14, No.3,pp203-207, Sep 2014
  4. Jae-hyun Kwon, Jun-myung Lee, "Thermal characteristics of the design on residential 13.5W COB LED down light heat sink", Journal of korea institute of information electronics and communication technology, Vol. 7, No. 1, pp20-25, Mar. 2014 https://doi.org/10.17661/jkiiect.2014.7.1.020
  5. Icadescent Sculpture of Dylan Kehde Roelofs, "Tesla's wireless 'sensitive brush' Bulbs http://www.incandescentsculpture.com/wordpress/teslas-sensitive-brush-bulbs-orthe-invention-of-the-fluorescent-light/(2014-12-05)
  6. Jun-myung Lee, "A study on the LED-based media transmission mechanics VLC system module and efficiency", Journal of korea institute of information electronics and communication technology, Vol. 6, No. 1, pp51-56, Mar. 2013
  7. Sam Ben-Yaakov, Moshe Shvartsas and Jim Lester, "A Behavioral SPICE Compatible Model of an Electrodeless Fluorescent Lamp", IEEE, pp 948-951, 2002.
  8. Louis Robert Nerone, "Novel Self-Oscillating Class E Ballast for Compact Fluorescent Lamps", IEEE Trans. Power Electronics, Vol. 16, pp 175-183, 2001. https://doi.org/10.1109/63.911141
  9. Jae-yup No, Chin-Woo Yi, "A design of Self-Exciting Electronic Ballast Using the Simulation Method", J. Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 19, pp 8-12, 2005. https://doi.org/10.5207/JIEIE.2005.19.8.008
  10. Wang-Sik Kim, Jae-Hyun Han, Gye-Hyun Jo, Chong-Yeun Park, "Development of Self Oscillating Electronic Ballast for Fluorescent Lamp Using SEPIC Converter", J. Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 17, pp 20-25, 2003. https://doi.org/10.5207/JIEIE.2003.17.4.020
  11. Hyun-Moo Lee, Kang-Hun Koh, Hee-Seok Koh, (Hyun-Woo Lee, "A Design of PFC Circuit for Reducing the Harmonic in Constant Voltage-fed Electronic Ballast Circuit", J. Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 18, pp 41-48, 2004. https://doi.org/10.5207/JIEIE.2004.18.4.041
  12. Gi-Jung Kim, "Understanding electronic ballast circuits and characteristics for HID lamps", J. Korea Electric Engineers Association, pp 25-28, November 2001.
  13. S. Sagiroglu, I. Colak and R. Bayindir, "Power fator correction technique based on artificial neural networks", Energy Conservation & Management, pp 3204-3215, 2006.