DOI QR코드

DOI QR Code

A study on the comparison of a steel building with braced frames and with RC walls

  • Buyuktaskin, Almila H. Arda (Department of Architecture, Structural and Earthquake Engineering Working Group, Istanbul Technical University)
  • 투고 : 2016.06.26
  • 심사 : 2017.01.13
  • 발행 : 2017.03.25

초록

In this study, two geometrically identical multi-storey steel buildings with different lateral load resisting systems are structurally analyzed under same earthquake conditions and they are compared with respect to their construction costs of their structural systems. One of the systems is a steel structure with eccentrically steel braced frames. The other one is a RC wall-steel frame system, that is a steel framed structure in combination with a reinforced concrete core and shear walls of minimum thickness that the national code allows. As earthquake resisting systems, steel braced frames and reinforced concrete shear walls, for both cases are located on identical places in either building. Floors of both buildings will be of reinforced concrete slabs of same thickness resting on composite beams. The façades are assumed to be covered identically with light-weight aluminum cladding with insulation. Purpose of use for both buildings is an office building of eight stories. When two systems are structurally analyzed by FEM (finite element method) and dimensionally compared, the dual one comes up with almost 34% less cost of construction with respect to their structural systems. This in turn means that, by using a dual system in earthquake zones such as Turkey, for multi-storey steel buildings with RC floors, more economical solutions can be achieved. In addition, slender steel columns and beams will add to that and consequently more space in rooms is achieved.

키워드

참고문헌

  1. Arda, T.S. (1978), "Stability bracings for steel roofs and buildings", Sakarya Engineering-Architecture State Academy Publishers, Istanbul, Turkey.
  2. Arda, T.S. and Yardimci, N. (1991), "Calculation of composite members for steel structures according to plastic design", Kurtis Publishers, Istanbul, Turkey.
  3. Celep, D. (2007), "Comparison with respect to earthquake loads of a multi-storey steel building with steel bracings and reinforced concrete shear walls", MSc. Dissertation under the advisory of Asst. Professor Dr. H. Almila Arda Buyuktaskin, Gradute School of Science and Technology, Istanbul Technical University, Istanbul, Turkey.
  4. D'Aniello, M., Landolfo, R., Piluso, V. and Rizzano, G. (2012), "Ultimate behaviour of steel beams under non-uniform bending", J. Constr. Steel Res., 78, 144-158. https://doi.org/10.1016/j.jcsr.2012.07.003
  5. D'Aniello, M., La Manna Ambrosino, G., Portioli, F. and Landolfo, R. (2013), "Modelling aspects of the seismic response of steel concentric braced frames", Steel Compos. Struct., 15(5), 539-566. https://doi.org/10.12989/scs.2013.15.5.539
  6. D'Aniello, M., La Manna Ambrosino, G., Portioli, F. and Landolfo, R. (2015), "The influence of out-of-straightness imperfection in physical-theory models of bracing members on seismic performance assessment of concentric braced structures", Struct. Des. Tall Spec. Build., 24(3), 176-197. https://doi.org/10.1002/tal.1160
  7. Della Corte, G., D'Aniello, M. and Landolfo, R. (2013), "Analytical and numerical study of plastic over strength of shear links", J. Constr. Steel Res., 82, 19-32. https://doi.org/10.1016/j.jcsr.2012.11.013
  8. Della Corte, G., D'Aniello, M. and Mazzolani, F.M. (2007), "Inelastic response of shear links with axial restraints: numerical vs. analytical results", Proceedings of the 5th International Conference on Advances in Steel Structures, Singapore, December.
  9. Guneyisi, E.M., D'Aniello, M., Landolfo, R. and Mermerdas, K. (2013), "A novel formulation of the flexural overstrength factor for steel beams", J. Constr. Steel Res., 90, 60-71. https://doi.org/10.1016/j.jcsr.2013.07.022
  10. Guneyisi, E.M., D'Aniello, M., Landolfo, R. and Mermerdas, K. (2014), "Prediction of the flexural overstrength factor for steel beams using artificial neural network", Steel Compos. Struct., 17(3), 215-236. https://doi.org/10.12989/scs.2014.17.3.215
  11. Hana, L., Li, W. and Yang, Y. (2009), "Seismic behaviour of concrete-filled steel tubular frame to rc shear wall high-rise mixed structures", J. Constr. Steel Res., 65(5), 1249-1260. https://doi.org/10.1016/j.jcsr.2008.12.005
  12. Mazzolani, F.M., Della Corte, G. and D'Aniello, M. (2009), "Experimental analysis of steel dissipative bracing systems for seismic upgrading", J. Civ. Eng. Manage., 15(1), 7-19. https://doi.org/10.3846/1392-3730.2009.15.7-19
  13. Rajesh, M.N. and Prasad, S.K. (2014), "Seismic performance study on rc wall buildings from pushover analysis", Int. J. Res. Eng. Technol., 3(6), 165-171.
  14. Safkan, I. (2012), "Comparison of Eurocode 8 and Turkish Earthquake Code 2007 for Residential RC Buildings in Cyprus", Proceedings of the 15th World Conference on Earthquake Engineering, Portugal, September.
  15. Sun, G., He, R., Qiang, G. and Fang, Y. (2011), "Cyclic behavior of partially-restrained steel frame with rc infill walls", J. Constr. Steel Res., 67(12), 1821-1834. https://doi.org/10.1016/j.jcsr.2011.06.002
  16. Tenchini, A., D'Aniello, M., Rebelo, C., Landolfo, R., da Silva, L.S. and Lima, L. (2014), "Seismic performance of dual-steel moment resisting frames", J. Constr. Steel Res., 101, 437-454. https://doi.org/10.1016/j.jcsr.2014.06.007
  17. TS-498 (1997), Turkish Design Code for Loads, Turkish Standards Institution, Ankara, Turkey.
  18. TS-500 (2000), Turkish Design Code for Reinforced Concrete Structures, Turkish Standards Institution, Ankara, Turkey.
  19. TS-648 (1982), Turkish Design Code for Steel Structures, Turkish Standards Institution, Ankara, Turkey.
  20. Turkish Earthquake Code (2007), Ministry of Public Works and Settlement Government of Republic of Turkey

피인용 문헌

  1. A study towards interdisciplinary research: a Material-based Integrated Computational Design Model (MICD-m) in architecture 2017, https://doi.org/10.1080/00038628.2017.1416575
  2. Mechanical property test and analysis on the main body frame structure of electrical dust precipitator vol.26, pp.2, 2017, https://doi.org/10.1590/s1517-707620210002.1290
  3. Cyclic loading test of abnormal joints in SRC frame-bent main building structure vol.20, pp.4, 2017, https://doi.org/10.12989/eas.2021.20.4.417