DOI QR코드

DOI QR Code

Design of Miniaturized Microstrip Patch Antennas Using Non-Foster Circuits for Compact Controlled Reception Pattern Antenna Array

  • Ha, Sang-Gyu (Department of Electronics and Computer Engineering, Hanyang University) ;
  • Cho, Jeahoon (Department of Electronics and Computer Engineering, Hanyang University) ;
  • Jung, Kyung-Young (Department of Electronics and Computer Engineering, Hanyang University)
  • Received : 2017.03.27
  • Accepted : 2017.04.04
  • Published : 2017.04.30

Abstract

The global positioning system (GPS) is a useful system in civilian and military applications. However, because of the weak signal, GPS receivers are vulnerable to interference caused by unwanted signals or intentional jammers. To alleviate this issue, a controlled reception pattern antenna (CRPA) array can be employed to adaptively place radiation pattern nulls toward the direction of the signal interference. The performance of the CRPA array improves as the number of antenna elements increases. Therefore, antenna miniaturization is highly desirable for CRPA applications. We designed a compact CRPA array based on seven electrically miniaturized microstrip patch antennas (MPAs) on a 5-inch ground platform. We used a non-Foster matching circuit to match efficiently miniaturized MPAs on an FR-4 substrate. Experimental results show that the non-Foster matching circuit significantly improves such elements of antenna performance as return loss and antenna gain. In addition, we confirmed that the mutual coupling of the proposed CRPA array is less than -45 dB.

Keywords

References

  1. J. G. Ryu, D. G. Oh, H. H Kim, and S. Y. Hong, "Proposal of an algorithm for the efficient forward link adaptive coding and modulation system for satellite communication," Journal of Electromagnetic Engineering and Science, vol. 16, no. 2, pp. 80-86, 2016. https://doi.org/10.5515/JKIEES.2016.16.2.80
  2. B. Byun, J. C. Hyun, S. Seo, and H. Choo, "Optimum array configuration to improve null steering time for mobile CRPA systems," Journal of Electromagnetic Engineering and Science, vol. 16, no. 2, pp. 74-79, 2016. https://doi.org/10.5515/JKIEES.2016.16.2.74
  3. S. Chen, G. Liu, X. Chen, T. Lin, X. Liu, and Z. Duan, "Compact dual-band GPS microstrip antenna using multilayer LTCC substrate," IEEE Antennas Wireless Propagation Letters, vol. 9, pp. 421-423, 2010. https://doi.org/10.1109/LAWP.2010.2049822
  4. D. Pozar and S. Duffly, "A dual-band circularly polarized aperture-coupled stacked microstrip antenna for global positioning satellite," IEEE Transactions on Antennas and Propagation, vol. 45, no. 11, pp. 1618-1625, 1997. https://doi.org/10.1109/8.650073
  5. O. Tade, P. Gardner, and P. Hall, "Negative impedance converters for broadband antenna matching," in Proceedings of the 42nd European Microwave Conference, Amsterdam, Netherlands, 2012, pp. 613-616.
  6. E. Ugarte-Munoz, S. Hrabar, D. Segovia-Vargas, and A. Kiricenko, "Stability of non-Foster elements for use in active metamaterials and antennas," IEEE Transactions on Antennas and Propagation, vol. 60, no. 7, pp. 3490-3494, 2012. https://doi.org/10.1109/TAP.2012.2196957

Cited by

  1. Design of a planar periodic lossy magnetic surface to improve active array patterns with enhanced isolation pp.1751-8733, 2018, https://doi.org/10.1049/iet-map.2018.5453
  2. Design of Small CRPA Arrays with Circular Microstrip Loops for Electromagnetically Coupled Feed vol.18, pp.2, 2018, https://doi.org/10.26866/jees.2018.18.2.129
  3. Design and Fabrication of VHF Band Small Antenna Using Composite Right/Left-Handed Transmission Lines vol.14, pp.1, 2019, https://doi.org/10.1007/s42835-018-00033-5