References
- Acun, B. (2010), "Energy based seismic performance assessment of reinforced concrete columns", Ph.D. Dissertation, Middle East Technical University, Ankara, Turkey.
- Acun, B. and Sucuoglu, H. (2012), "Energy dissipation capacity of reinforced concrete columns under cyclic displacements", ACI Struct. J., 109(4), 531-540.
- Akbas, B. and Shen, J. (2003), "Earthquake resistant design and energy concepts", Tech. J.-Digest, 14(2), 865-888.
- Akbas, B., Shen, J. and Hao, A.H. (2001), "Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective", Struct. Des. Tall Build., 10(3), 193-217. https://doi.org/10.1002/tal.172
- Akkar, S.D. and Miranda, E. (2005), "Statistical evaluation of approximate methods for estimating maximum deformation demands on existing structures", J. Struct. Eng., 131(1), 160-172. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(160)
- ASCE (2007), ASCE/SEI 41-06: Seismic Rehabilitation of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, U.S.A.
- ATC 40 (1996), Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council, Washington, U.S.A.
- Aydinoglu, M.N. (2003), "An incremental response spectrum analysis procedure based on inelastic spectral displacements for multi-mode seismic performance evaluation", Bull. Earthq. Eng., 1(1), 3-36. https://doi.org/10.1023/A:1024853326383
- Bertero, V.V. and Gilmore, A.T. (1994), Use of Energy Concepts in Earthquake Resistant Analysis and Design: Issues and Future Directions, Advances in Earthquake Engineering Practice, Short Course in Structural Engineering, Architectural and Economic Issues, University of California, Berkeley, U.S.A.
- Cao, V.V., Ronagh, H.R. and Baji, H. (2014), "Seismic risk assessment of deficient reinforced concrete frames in near-fault regions", Adv. Concrete Constr., 2(4), 261-280. https://doi.org/10.12989/acc.2014.2.4.261
- Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144
- Clough, R.W. (1996), Effects of Stiffness Degradation on Earthquake Ductility Requirement, University of California, Berkeley, U.S.A.
- Computers and Structures Inc (2011), SAP2000: Integrated Structural Analysis and Design Software, CSI, Version 15.1.0, Berkeley, U.S.A.
- EC 8 (2004), Eurocode 8: Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
- ElAssaly, M. (2013), "Towards seismic vulnerability assessment of the building stock in Egypt", Arab. J. Sci. Eng., 38(11), 2953-2969. https://doi.org/10.1007/s13369-012-0467-z
- Eom, T.S. and Park, H.G. (2010), "Evaluation of energy dissipation of slender reinforced concrete members and its applications", Eng. Struct., 32(9), 2884-2893. https://doi.org/10.1016/j.engstruct.2010.05.007
- Eom, T.S., Park, H.G. and Kang, S.M. (2009), "Energy based cyclic force displacement relationship for reinforced concrete short coupling beams", Eng. Struct., 31(9), 2020-2031. https://doi.org/10.1016/j.engstruct.2009.03.008
- Fajfar, P. (2000), "A nonlinear analysis method for performance-based seismic design", Earthq. Spec., 16(3), 573-592. https://doi.org/10.1193/1.1586128
- Fajfar, P. and Fischinger, M. (1988), "N2-A method for non-linear seismic analysis of regular buildings", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo, Kyoto, Japan, August.
- Fajfar, P. and Gaspersic, P. (1996), "The N2 method for seismic damage analysis of RC buildings", Earthq. Eng. Struct. Dyn., 25(1), 31-46. https://doi.org/10.1002/(SICI)1096-9845(199601)25:1<31::AID-EQE534>3.0.CO;2-V
- Fajfar, P., Marusic, D. and Perus, I. (2005), "Torsional effects in the pushover-based seismic analysis of buildings", J. Earthq. Eng., 9(6), 831-854. https://doi.org/10.1080/13632460509350568
- FEMA 273 (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, U.S.A.
- FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, U.S.A.
- FEMA 440 (2005), Improvement of Nonlinear Static Seismic Analysis Procedures, Federal Emergency Management Agency, Washington, U.S.A.
- Freeman, S.A. (1998), "Development and use of capacity spectrum method", Proceedings of the 6th U.S. National Conference on Earthquake Engineering, Seattle, Washington, U.S.A., May.
- Freeman, S.A., Nicoletti, J.P. and Tyrell, J.V. (1975), "Evaluations of existing buildings for seismic risk-a case study of puget sound naval shipyard, Bremerton, Washington", Proceedings of the U.S. National Conference on Earthquake Engineering, Ann Arbor, Michigan, U.S.A., June.
- Goel, R.K. (2008), "Evaluation of current nonlinear static procedures for reinforced concrete buildings", Proceedings of the 14th World Conference on Earthquake Engineering, Bejing, China, October.
- Gupta, B. and Kunnath, S.K. (2000), "Adaptive spectra-based pushover procedure for seismic evaluation of structures", Earthq. Spec., 16(2), 367-391. https://doi.org/10.1193/1.1586117
- Habibi, A., Chan, W.K. and Albermani, F. (2013), "Energy-based design method for seismic retrofitting with passive energy dissipation systems", Eng. Struct., 46, 77-86. https://doi.org/10.1016/j.engstruct.2012.07.011
- Hakim, R.A., Alama, M.S. and Ashour, S.A. (2014), "Seismic assessment of RC building according to ATC 40, FEMA 356 and FEMA 440", Arab. J. Sci. Eng., 39(11), 7691-7699. https://doi.org/10.1007/s13369-014-1395-x
- Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st World Conference on Earthquake Engineering, Berkeley, California, U.S.A., June.
- Lee, S.S. and Goel, S.C. (2001), Performance Based Design of Steel Moment Frames Using Target Drift and Yield Mechanism, Research Report UMCEE 01-17, Department of Civil and Environmental Engineering, University of Michigan, U.S.A.
- Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002), "Energy based seismic design of structures using yield mechanism and target drift", J. Struct. Eng., 128(8), 1046-1054. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1046)
- Leelataviwat, S., Saewon, W. and Goel, S.C. (2008), "An energy based method for seismic evaluation of structures", Proceedings of the 14th World Conference on Earthquake Engineering, Bejing, China, October.
- Liao, W.C. and Ve Goel, S.C. (2012), "Performance-based plastic design and energy based evaluation of seismic resistant RC moment frame", J. Mar. Sci. Technol., 20(3), 304-310.
- Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Div., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
- Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. Dyn., 30(4), 485-499. https://doi.org/10.1002/eqe.17
- Neville, A. (1996), Properties of Concrete, John Wiley & Sons, New York, U.S.A.
- Park, H.G. and Eom, T.S. (2006), "A simplified method for estimating the amount of energy dissipated by flexure dominated reinforced concrete members for moderate cyclic deformations", Earthq. Spec., 22(3), 459-490. https://doi.org/10.1193/1.2197547
- PEER Strong Ground Motion Database (2015), http://ngawest2.berkeley.edu/
- Shen, J. and Akbas, B. (1999), "Seismic energy demand in steel moment frames", J. Earthq. Eng., 3(4), 519-559. https://doi.org/10.1080/13632469909350358
- Sucuoglu, H. and Erberik, A. (2004), "Energy-based hysteresis and damage models for deteriorating systems", Earthq. Eng. Struct. Dyn., 33(1), 69-88. https://doi.org/10.1002/eqe.338
- Takeda, T., Sozen, M.A. and Nielsen, N.N. (1970), "Reinforced concrete response to simulated earthquakes", J. Struct. Div., 96(12), 2557-2573.
- Terapathana, S. (2012), "An energy method for earthquake resistant design of RC structures", Ph.D. Dissertation, University of Southern California, Los Angeles, U.S.A.
- TSDC (2007), Turkish Seismic Design Code, Ministry of Public Works and Settlement, Ankara, Turkey.
- Uang, C.M. and Bertero, V.V. (1988), Use of Energy as a Design Criterion in Earthquake Resistant Design, Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California, Berkeley, U.S.A.
- Vision 2000 (1995), Performance Based Seismic Engineering of Buildings, Structural Engineers Association of California, Sacramento, California, U.S.A.
- Yang, Y., Liu, R., Xue, Y. and Li, H. (2017), "Experimental study on seismic performance of reinforced concrete frames retrofitted with eccentric buckling-restrained braces (BRBs)", Earthq. Struct., 12(1), 79-89. https://doi.org/10.12989/eas.2017.12.1.079
Cited by
- Artificial Ground Motions and Nonlinear Response of RC Structures vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/8849623