DOI QR코드

DOI QR Code

Seismic response of SiO2 nanoparticles-reinforced concrete pipes based on DQ and newmark methods

  • Motezaker, Mohsen (Department of Civil Engineering, School of Science and Engineering, Sharif University of Technology, International Campus) ;
  • Kolahchi, Reza (Department of Mechanical Engineering, Kashan Branch, Islamic Azad University)
  • Received : 2017.04.11
  • Accepted : 2017.05.18
  • Published : 2017.06.25

Abstract

Dynamic analysis of a concrete pipes armed with Silica ($SiO_2$) nanoparticles subjected to earthquake load is presented. The structure is modeled with first order shear deformation theory (FSDT) of cylindrical shells. Mori-Tanaka approach is applied for obtaining the equivalent material properties of the structure considering agglomeration effects. Based on energy method and Hamilton's principle, the motion equations are derived. Utilizing the harmonic differential quadrature method (HDQM) and Newmark method, the dynamic displacement of the structure is calculated for the Kobe earthquake. The effects of different parameters such as geometrical parameters of pipe, boundary conditions, $SiO_2$ volume percent and agglomeration are shown on the dynamic response of the structure. The results indicate that reinforcing the concrete pipes by $SiO_2$ nanoparticles leads to a reduction in the displacement of the structure during an earthquake.

Keywords

References

  1. Brush, D.O. and Almroth, B.O. (1975), Buckling of Bars, Plates and Shells, McGraw-Hill, New York, U.S.A.
  2. Cheraghi, A. and Zahrai, S.M. (2015), "Innovative multi-level control with concentric pipes along brace to reduce seismic response of steel frames", J. Constr. Steel Res., 127, 120-135.
  3. Gonzalez-Nicieza, C., Ordiales-Martinez, V., Lain-Huerta, R., Lain-Huerta, C. and Alvarez-Fernandez, M.I. (2017), "Failure analysis of a cracked concrete pipe in a 50 MW thermosolar power plant", Eng. Fail. Anal., In press.
  4. Heidarzadeh, A., Kolahchi, R. and Rabani Bidgoli, M. (2016), "Concrete pipes reinforced with $AL_2O_3$ nanoparticles considering agglomeration: Magneto-thermo-mechanical stress analysis", J. Civil Eng., 1-8.
  5. Jafarian Arani, A. and Kolahchi, R. (2016), "Buckling analysis of embedded concrete columns armed with carbon nanotubes", Comput. Concrete, 17(5), 567-578. https://doi.org/10.12989/cac.2016.17.5.567
  6. Kolahchi, R. and Moniribidgoli, A.M. (2016b), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech., 37(2), 265-274. https://doi.org/10.1007/s10483-016-2030-8
  7. Kolahchi, R., Rabani Bidgoli, M., Beygipoor, G. and Fakhar, M.H. (2015), "A nonlocal nonlinear analysis for buckling in embedded FG-SWCNT-reinforced microplates subjected to magnetic field", J. Mech. Sci. Technol., 29(9), 3669-3677. https://doi.org/10.1007/s12206-015-0811-9
  8. Kolahchi, R., Safari, M. and Esmailpour, M. (2016a), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023
  9. Lai, Z. and Varma, A.H. (2017), "Seismic behavior and modeling of concrete partially filled spirally welded pipes (CPF-SWP)", Thin Wall Struct., 113, 240-252. https://doi.org/10.1016/j.tws.2016.12.025
  10. Mahjoubi, S. and Maleki, S. (2016), "Seismic performance evaluation and design of steel structures equipped with dual-pipe dampers", J. Constr. Steel Res., 122, 25-39. https://doi.org/10.1016/j.jcsr.2016.01.023
  11. Nedjar, D., Hamane, M., Bensafi, M., Elachachi, S.M. and Breysse, D. (2007), "Seismic response analysis of pipes by a probabilistic approach", Soil Dyn. Earthq. Eng., 27(2), 111-115. https://doi.org/10.1016/j.soildyn.2006.06.001
  12. Shi, D.L. and Feng, X. (2004), "The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites", J. Eng. Mater. Technol., 126(3), 250-270. https://doi.org/10.1115/1.1751182
  13. Simsek, M. (2010), "Non-linear vibration analysis of a functionally graded Timoshenko beam under action of a moving harmonic load", Compos. Struct., 92(10), 2532-2546. https://doi.org/10.1016/j.compstruct.2010.02.008
  14. Simsek, M. (2010), "Non-linear vibration analysis of a functionally graded Timoshenko beam under action of a moving harmonic load", Compos. Struct., 92(10), 2532-2546. https://doi.org/10.1016/j.compstruct.2010.02.008
  15. Zaghi, A.E. and Saiidi, M.S. (2010), "Seismic performance of pipe-pin two-way hinges in concrete bridge columns", J. Earthq. Eng., 14(8), 1253-1302. https://doi.org/10.1080/13632469.2010.490321
  16. Zamani Nouri, A. (2017), "Mathematical modeling of concrete pipes reinforced with CNTs conveying fluid for vibration and stability analyses", Comput. Concrete, 19(3), 325-331. https://doi.org/10.12989/cac.2017.19.3.325
  17. Zamanian, M., Kolahchi, R. and Rabani Bidgoli, M. (2016), "Agglomeration effects on the buckling behaviour of embedded concrete columns reinforced with $SiO_2$ nano-particles", Wind Struct., 24(1), 43-57. https://doi.org/10.12989/WAS.2017.24.1.043
  18. Zhang, C., Zhou, W., Ma, G., Hu, C. and Li, S. (2015), "A meso-scale approach to modeling thermal cracking of concrete induced by water-cooling pipes", Comput. Concrete, 15(4), 485-501. https://doi.org/10.12989/cac.2015.15.4.485
  19. Zhu, Z., Qiang, S. and Chen, W. (2013), "A new method solving the temperature field of concrete around cooling pipes", Comput. Concrete, 11(5), 441-462. https://doi.org/10.12989/cac.2013.11.5.441

Cited by

  1. Buckling response of smart plates reinforced by nanoparticles utilizing analytical method vol.35, pp.1, 2020, https://doi.org/10.12989/scs.2020.35.1.001
  2. Eringen's nonlocal model sandwich with Kelvin's theory for vibration of DWCNT vol.25, pp.4, 2017, https://doi.org/10.12989/cac.2020.25.4.343
  3. A first-principle study of nonlinear large amplitude vibration and global optimization of 3D penta-graphene plates based on the Bees Algorithm vol.231, pp.9, 2020, https://doi.org/10.1007/s00707-020-02706-7
  4. Application of Kelvin's approach for material structure of CNT: Polynomial volume fraction law vol.76, pp.1, 2017, https://doi.org/10.12989/sem.2020.76.1.129
  5. Novel Numerical Approach for Free Vibration of Nanocomposite Joined Conical-Cylindrical-Conical Shells vol.59, pp.1, 2017, https://doi.org/10.2514/1.j059518