DOI QR코드

DOI QR Code

파티클 필터를 이용한 건물 에너지 시뮬레이션 모델의 미지변수 추정

Particle Filter for Estimation of Uncertain Variables in Building Simulation Models

  • 투고 : 2017.07.05
  • 심사 : 2017.08.28
  • 발행 : 2017.10.30

초록

Kalman filtering has been used to estimate state variables of a building simulation model such as room air or surface temperatures. However, the Kalman filter can be used only for a linear model and unfortunately most of the building models are strongly non-linear. For example, the convective heat transfer coefficient is strongly influenced by state variables such as room or surface temperatures. In this study, the authors introduce the particle filter (PF), one of the representative nonlinear filters. The particle filter can estimate state variables and uncertain model parameters simultaneously by using the state augmentation technique. For a virtual experiment, a single zone model was developed based on the heat balance method. A series of experiments were conducted to test PF's estimation performance with regard to three uncertain model parameters (the heat capacity of the room air, indoor convective heat transfer coefficient, and the thermal resistance of a wall) and unknown internal heat gain. It is concluded that PF can successfully estimate the aforementioned four parameters. In addition, the more particles are used, the more accurate estimation can be achieved.

키워드

과제정보

연구 과제 주관 기관 : 국토교통부

참고문헌

  1. ASHRAE. (2013). ASHRAE handbook of fundamentals. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
  2. Bageshwar, V. L., Gebre-Egziabher, D., Garrard, W. L., & Georgiou, T. T. (2009). Stochastic observability test for discrete-time kalman filters, Journal of Guidance, Control, and Dynamics, 32(4), 1356-1370 https://doi.org/10.2514/1.38128
  3. Ching J., Beck, J. L., & Porter, K. A. (2006). Bayesian state and parameter estimation of uncertain dynamical systems, Probabilistic Engineering Mechanics, 21(1), 81-96 https://doi.org/10.1016/j.probengmech.2005.08.003
  4. Clarke, J. (2001). Energy Simulation in Building Design, 1st ed., Taylor & Francis
  5. Crassidis, J. L., & Junkins J. L. (2011). Optimal estimation of dynamic systems, Second Edition, CRC Press
  6. Federspiel, C. C. (1997). Estimating the inputs of gas transport processes in buildings, IEEE transactions on control systems technology, 5(5), 480-489 https://doi.org/10.1109/87.623034
  7. Fux, S. F., Ashouri, A., Benz, M. J., & Guzzella, L. (2014). EKF based self-adaptive thermal model for a passive house, Energy and Buildings, 68, 811-817 https://doi.org/10.1016/j.enbuild.2012.06.016
  8. Hedrick, J. K., & Girard, A. (2005). Control of nonlinear dynamic systems: Theory and applications. Controllability and Observability of Nonlinear Systems, 48
  9. Heo, Y. S., Choudhary, R., & Augenbroe, G. (2012). Calibration of building energy models for retrofit analysis under uncertainty, Energy and Buildings, 47, 550-560 https://doi.org/10.1016/j.enbuild.2011.12.029
  10. IBPSA (1987-2015). Proceedings of the International Building Performance Simulation Association (IBPSA) conference ('87. '91, '93, '95, '97, '99, '01, '03, '05, '07, '09, '11, '13, '15)
  11. Kim, D. W., Park, C. S., & Kim, I. H. (2013). Use of Kalman filter for estimating unknown internal loads, Proceedings of the 13th IBPSA Conference (International Building Performance Simulation Association), Aug. 25-28, Chambery, France
  12. Kim, D. W., Park, C. S., & Lee, S. E. (2017). Feasibility of building energy simulation to architectural and engineering Design, Journal of the Architectural Institute of Korea Structure & Construction, 33(5), 63-72 https://doi.org/10.5659/JAIK_SC.2017.33.4.63
  13. Kim, P. & Huh, L. (2011). Kalman Filter for Beginners: with MATLAB Examples, CreateSpace Independent Publishing Platform
  14. Mathworks (2013). Statistics Toolbox: User's Guide, R2013a, MathWorks, Inc.
  15. Ogata, K. (2004). System dynamics, 4th Edition, Pearson Prentice Hall
  16. Park, C. S., Augenbroe, G., Messadi, T., Thitisawat, M., & Sadegh, N. (2004). In-situ calibration of a lumped simulation model of smart double-skin facade systems, Energy and Buildings, 36(11) 1117-1130 https://doi.org/10.1016/j.enbuild.2004.04.003
  17. Raftery, P., Keane, M., & Costa, A. (2011). Calibrating whole building energy models: detailed case study hourly measured data, Energy and buildings, 43, 3666-3679 https://doi.org/10.1016/j.enbuild.2011.09.039
  18. Rao, S.S. (2009). Engineering optimization - theory and practice, 4th Ed., John Wiley & Sons, Inc.
  19. Reddy T. A. (2006). Literature review on calibration of building energy simulation programs: uses, problems, procedures, uncertainty, and tools, ASHRAE transactions, 2006, 112(2), 226-240
  20. Reddy, T. A., Maor, I., & Panjapornpon, C. (2007). Calibrating detailed building energy simulation programs with measured data part II: application to three case study office buildings, HVAC&R Research, 13(2), 243-265 https://doi.org/10.1080/10789669.2007.10390953
  21. Schmidt. S. F. (1966). Applications of state space methods to navigation problems. Advanced Control Systems, 3, 293-340
  22. Simon, D. (2006). Optimal state estimation: kalman, H infinity, and nonlinear approaches, John Wiley & Sons
  23. Wetter, M., & Wright, J. (2004). A comparison of deterministic and probabilistic optimization algorithms for non-smooth simulation-based optimization, Building and Environment, 39, 989-999 https://doi.org/10.1016/j.buildenv.2004.01.022
  24. Yoon, S. H., Park, C. S., & Augenbroe, G. (2011). On-line parameter estimation and optimal control strategy of a double-skin system, Building and Environment, 46(5), 1141-1150 https://doi.org/10.1016/j.buildenv.2010.12.001