DOI QR코드

DOI QR Code

A numerical study on optimal FTMD parameters considering soil-structure interaction effects

  • Etedali, Sadegh (Department of Civil Engineering, Birjand University of Technology) ;
  • Seifi, Mohammad (Department of Civil Engineering, Birjand University of Technology) ;
  • Akbari, Morteza (Department of Civil Engineering, Birjand University of Technology)
  • 투고 : 2017.12.29
  • 심사 : 2018.09.28
  • 발행 : 2018.12.10

초록

The study on the performance of the nonlinear friction tuned mass dampers (FTMD) for the mitigation of the seismic responses of the structures is a topic that still inspires the efforts of researchers. The present paper aims to carry out a numerical study on the optimum tuning of TMD and FTMD parameters using a multi-objective particle swarm optimization (MOPSO) algorithm including soil-structure interaction (SSI) effects for seismic applications. Considering a 3-story structure, the performances of the optimized TMD and FTMD are compared with the uncontrolled structure for three types of soils and the fixed base state. The simulation results indicate that, unlike TMDs, optimum tuning of FTMD parameters for a large preselected mass ratio may not provide a best and optimum design. For low mass ratios, optimal selection of friction coefficient has an important key to enhance the performance of FTMDs. Consequently, a free parameter search of all FTMD parameters provides a better performance in comparison with considering a preselected mass ratio for FTMD in the optimum design stage of the FTMD. Furthermore, the SSI significant effects on the optimum design of the TMD and FTMD. The simulation results also show that the FTMD provides a better performance in reducing the maximum top floor displacement and acceleration of the building in different soil types. Moreover, the performance of the TMD and FTMD decrease with increasing soil softness, so that ignoring the SSI effects in the design process may give an incorrect and unrealistic estimation of their performance.

키워드

참고문헌

  1. Bakre, S. and Jangid, R. (2007), "Optimum parameters of tuned mass damper for damped main system", Struct. Control Health Monit., 14(3), 448-470. https://doi.org/10.1002/stc.166
  2. Bekdas, G. and Nigdeli, S.M. (2017), "Metaheuristic based optimization of tuned mass dampers under earthquake excitation by considering soil-structure interaction", Soil Dyn. Earthq. Eng., 92, 443-461. https://doi.org/10.1016/j.soildyn.2016.10.019
  3. Brzeski, P., Kapitaniak, T. and Perlikowski, P. (2016), "The use of tuned mass absorber to prevent overturning of the rigid block during earthquake", Int. J. Struct. Stab. Dyn., 16(10), 1550075. https://doi.org/10.1142/S0219455415500753
  4. Chang, C. (1999), "Mass dampers and their optimal designs for building vibration control", Eng. Struct., 21(5), 454-463. https://doi.org/10.1016/S0141-0296(97)00213-7
  5. Coello Coello, C.A. and Lechuga, M.S. (2002), "MOPSO: A proposal for multiple objective particle swarm optimization", Proceedings of the 2002 Congress on Evolutionary Computation (CEC 2002), Honolulu, Hawaii, U.S.A., May.
  6. Constantinou, M., Mokha, A. and Reinhorn, A. (1990), "Teflon bearings in base isolation II: Modeling", J. Struct. Eng., 116(2), 455-474. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(455)
  7. Etedali S. and Tavakoli S. (2017), "PD/PID controller design for seismic control of high-rise buildings using multi-objective optimization: A comparative study with LQR controller", J. Earthq. Tsunami, 11(3), 1750009. https://doi.org/10.1142/S1793431117500099
  8. Etedali, S. (2017), "A new modified independent modal space control approach toward control of seismic-excited structures", Bull. Earthq. Eng., 15(10), 4215-4243. https://doi.org/10.1007/s10518-017-0134-6
  9. Etedali, S. and Mollayi, N. (2018), "Cuckoo search-based least squares support vector machine models for optimum tuning of tuned mass dampers", Int. J. Struct. Stab. Dyn., 18(2), 1850028. https://doi.org/10.1142/S0219455418500281
  10. Etedali, S., Sohrabi, M.R. and Tavakoli, S. (2013), "An independent robust modal PID control approach for seismic control of buildings", J. Civil Eng Urban., 3(5), 279-291.
  11. Etedali, S., Zamani, A.A. and Tavakoli, S. (2018), "A GBMO-based $PI^{\lambda}D^{\mu}$ controller for vibration mitigation of seismic-excited structures", Automat. Constr., 87(C), 1-12. https://doi.org/10.1016/j.autcon.2017.12.005
  12. Farshidianfar, A. and Soheili, S. (2013), "Ant colony optimization of tuned mass dampers for earthquake oscillations of high-rise structures including soil-structure interaction", Soil Dyn. Earthq. Eng., 51, 14-22. https://doi.org/10.1016/j.soildyn.2013.04.002
  13. Gewei, Z. and Basu, B. (2011), "A study on friction-tuned mass damper: Harmonic solution and statistical linearization", J. Vib. Control, 17(5), 721-731. https://doi.org/10.1177/1077546309354967
  14. Gholizad, A. and Ojaghzadeh Mohammadi, S.D. (2017), "Reliability-based design of tuned mass damper using Monte Carlo simulation under artificial earthquake records", Int. J. Struct. Stab. Dyn., 17(10), 1750121. https://doi.org/10.1142/S0219455417501218
  15. Hadi, M.N. and Arfiadi, Y. (1998), "Optimum design of absorber for MDOF structures", J. Struct. Eng., 124(11), 1272-1280. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:11(1272)
  16. Heidari, A.H., Etedali, S. and Javaheri-Tafti M.R. (2018), "A hybrid LQR-PID control design for seismic control of buildings equipped with ATMD", Front. Struct. Civ. Eng., 12(1), 44-57. https://doi.org/10.1007/s11709-016-0382-6
  17. Kaveh, A., Mohammadi, S., Hosseini, O.K., Keyhani, A. and Kalatjari, V. (2015), "Optimum parameters of tuned mass dampers for seismic applications using charged system search", Iran. J. Sci. Technol. Trans. Civ. Eng., 39(C1), 21-40.
  18. Kennedy, J. (2011), Particle Swarm Optimization, in Encyclopedia of Machine learning, Springer, Boston, Massachusetts, U.S.A., 760-766.
  19. Keshtegar, B. and Etedali, S. (2017), "Novel mathematical models based on regression analysis scheme for optimum tuning of TMD parameters", J. Solid Fluid Mech., 6(4), 59-75.
  20. Khatibinia, M., Gholami, H. and Labbafi S. (2016), "Multi-objective optimization of tuned mass dampers considering soil-structure interaction", Int. J. Optim. Civ. Eng., 6(4), 595-610.
  21. Lee, C.L., Chen, Y.T., Chung, L.L. and Wang Y.P. (2006), "Optimal design theories and applications of tuned mass dampers", Eng. Struct., 28(1), 43-53. https://doi.org/10.1016/j.engstruct.2005.06.023
  22. Leung, A. and Zhang, H. (2009), "Particle swarm optimization of tuned mass dampers", Eng. Struct., 31(3), 715-728. https://doi.org/10.1016/j.engstruct.2008.11.017
  23. Lin, C.C., Lin, G.L. and Chiu, K.C. (2017), "Robust design strategy for multiple tuned mass dampers with consideration of frequency bandwidth", Int. J. Struct. Stab. Dyn., 17(1), 1750002. https://doi.org/10.1142/S021945541750002X
  24. MATLAB (2000), The MathWorks, Inc., Natick, Massachusetts, U.S.A.
  25. Mohebbi, M., Shakeri, K., Ghanbarpour, Y. and Majzoub, H. (2013), "Designing optimal multiple tuned mass dampers using genetic algorithms (GAs) for mitigating the seismic response of structures", J. Vib. Control, 19(4), 605-625 https://doi.org/10.1177/1077546311434520
  26. Pisal, A.Y. and Jangid, R. (2014), "Seismic response of multi-story structure with multiple tuned mass friction dampers", Int. J. Adv. Struct. Eng., 6(1), 46.
  27. Ricciardelli, F. and Vickery, B.J. (1999), "Tuned vibration absorbers with dry friction damping", Earthq. Eng. Struct. Dyn., 28(7), 707-723. https://doi.org/10.1002/(SICI)1096-9845(199907)28:7<707::AID-EQE836>3.0.CO;2-C
  28. Sadek, F., Mohraz, B., Taylor, A.W. and Chung R.M. (1997), "A method of estimating the parameters of tuned mass dampers for seismic applications", Earthq. Eng. Struct. Dyn., 26(6), 617-636. https://doi.org/10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z
  29. Salvi, J. and Rizzi, E. (2012), "A numerical approach towards best tuning of tuned mass dampers", Proceedings of the 25th International Conference on Noise and Vibration Engineering, Leuven, Belgium, September.
  30. Shi, Y. (2001), "Particle swarm optimization: Developments, applications and resources", Proceedings of the 2001 Congress on Evolutionary Computation, Seoul, South Korea, May.
  31. Shi, Y. and Eberhart, R. (1998), "A modified particle swarm optimizer", Proceedings of the IEEE World Congress on Computational Intelligence, Anchorage, Alaska, U.S.A., May.
  32. Shourestani, S., Soltani, F., Ghasemi, M. and Etedali, S. (2018), "SSI effects on seismic behavior of smart base-isolated structures", Geomech. Eng., 14(2), 161-174. https://doi.org/10.12989/GAE.2018.14.2.161
  33. Spyrakos, C., Maniatakis, C.A. and Koutromanos, I. (2009), "Soil-structure interaction effects on base-isolated buildings founded on soil stratum", Eng. Struct., 31(3), 729-737. https://doi.org/10.1016/j.engstruct.2008.10.012
  34. Tsai, H.C. and Lin, G.C. (1993), "Optimum tuned-mass dampers for minimizing steady-state response of support-excited and damped systems", Earthq. Eng. Struct. Dyn., 22(11), 957-973. https://doi.org/10.1002/eqe.4290221104
  35. Warburton, G. (1982), "Optimum absorber parameters for various combinations of response and excitation parameters", Earthq. Eng. Struct. Dyn., 10(3), 381-401. https://doi.org/10.1002/eqe.4290100304
  36. Wen, Y.K. (1976), "Method for random vibration of hysteretic systems", J. Eng. Mech. Div., 102(2), 249-263.
  37. Zerva, A. (2016), Spatial Variation of Seismic Ground Motions: Modeling and Engineering Applications, CRC Press.

피인용 문헌

  1. An integrated damping system for tall buildings vol.29, pp.7, 2018, https://doi.org/10.1002/tal.1724
  2. A control scheme for AMD in the presence of time-delays and SSI effects for tall buildings vol.79, pp.2, 2018, https://doi.org/10.12989/sem.2021.79.2.267