대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

폴리머 격자 보강재를 이용한 3D 프린팅 시멘트계 외장재의 구조 거동 분석

Structural Behavior Analysis of Polymer Lattice Reinforced 3D Printing Cementitious Cladding

  • 김학범 (고려대학교 일반대학원 건축사회환경공학과) ;
  • 박민재 (고려대학교 일반대학원 건축사회환경공학과) ;
  • 주영규 (고려대학교 건축사회환경공학부)
  • 투고 : 2018.04.03
  • 심사 : 2018.11.12
  • 발행 : 2018.11.30
⟨ 이전 논문 다음 논문 ⟩

초록

Cladding that finishes the exterior of a building could enhance the value of the building, and shape control is an important factor. With the recent development of 3D printing, cementitious claddings were printed by 3D printer in China, U.S.A and elsewhere. On the other hand, the structural safety of the exterior panel should be examined, as casualties occur when the exterior panel fails due to typhoon or impact. Cement-based cladding is reinforced by wire mesh to improve safety. Introducing 3D printing composite system with polymer and cement, makes it possible to produce claddings fast and accurate. Prior to the development of 3D printing cementitious cladding, the major parameters influencing the optimal shape were identified based on structural performance. The wind load, joint, and bond behavior between polymer and cement were considered. Polymer laminate shape, order, and thickness were variables, and finite element analysis was performed.

키워드

과제정보

연구 과제 주관 기관 : 국토교통부

참고문헌

  1. ABAQUS. (2010). ABAQUS analysis user's manual (Ver.6.7), ABAQUS, Inc., Pawtucket, RI.
  2. AIK Committee. (2016). Korean Building Code-structural 2016, Ministry of Land, Infrastructure and Transport, Korea.
  3. A, Liew., D. Lopez Lopez., T, Van Mele., & P, Block. (2017). Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor, Engineering Structures, 137, 323-335 https://doi.org/10.1016/j.engstruct.2017.01.075
  4. Cho, K. P., & Jeong, S. H. (2007). Estimation of Wind Loads for the Cladding of Tall Buildings using TVL Method, Proceedinds of WEIIK Symposium, 248-254.
  5. F, Fraternali., G, Carpentieri., M, Modano., F, Fabbrocino., & R, E. Skelton. (2015). A tensegrity approach to the optimal reinforcement of masonry domes and vaults through fiber-reinforced composite materials, Composite Structures, 134, 247-254 https://doi.org/10.1016/j.compstruct.2015.08.087
  6. I, Farina. (2016). On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers, Composites Part B, 90, 76-85. https://doi.org/10.1016/j.compositesb.2015.12.006
  7. Jorgen, S. Bergstrom., & Danika, Hayman. (2015). An Overview of Mechanical Properties and Material Modeling Polylactide (PLA) for Medical Applications, Annals of Biomedical Engineering.
  8. Korea ALC Association. (2004). Drawing,2 of ALC Architecture, Korea ALC Association, Seoul, Korea.
  9. Kwon, G., Engelhardt, M. D., & Klingner, R. E. (2012). Parametric Studies and Preliminary Design Recommendations on the Use of Postinstalled Shear Connectors for Strengthening Noncomposite Steel Bridges, Journal of Bridge Engineering, 17(2), 310-317. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000261
  10. Lee, K. Y. (2013). A Study on the Flexural Strengthening Effect of Flange Strengthened I-Shape PFRP Flexural Member with Carbon Fiber Sheet, Master Thesis, Department of Civil Engineering, Hongik University
  11. Lubos, BEHALEK. (2012). Friction Properties of Composites with Natural Fibres, Synthetic and Biodegradable Polymer Matrix, Proceedings of the 4 th international Conference NANOCON 2012.
  12. Ministry of Land, Infrastructure and Transport. (1997). Autoclaved Lightweight Concrete Panel Design Code, Ministry of Land, Infrastructure and Transport, Korea.
  13. PCI. (2016). ARCHITECTURAL PRECAST CONCRETE Third Edition, Mixed Sources
  14. Park, Y. M., Kim, H. W., Park, K. H., & Kim, S. J. (2017). Study on Construction Example of Free Formed Curved Facade using External UHPC Panels - Focused on the Remodeling Construction of Samsung-dong KEB Hana Bank, Journal of Korea Institute of Building Construction, 17(1), 64-65.
  15. R.J.M. Wolfs. (2015). 3D PRINTING OF CONCRETE STRUCTURES, Master Thesis, Department of the Built Environment Master Architecture, Building and Planning Specialization Structural Design, Eindhoven University of Technology.