대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

사전균열이 발생한 철근콘크리트 보의 외적 포스트텐셔닝 전단보강에서 보강깊이의 효과

Strengthening Depth Effect in Externally Post-tensioning Shear Strengthening of Pre-cracked Reinforced Concrete Beam

  • 이수헌 (경북대학교 융복합시스템공학부) ;
  • 신경재 (경북대학교 건설환경에너지공학부) ;
  • 이희두 (경북대학교 건설환경에너지공학부)
  • 투고 : 2018.07.31
  • 심사 : 2018.11.07
  • 발행 : 2018.11.30
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the shear strengthening effect of externally post-tensioning (EPT) method using high-strength steel rod in pre-cracked reinforced concrete (RC) beams. Three- and four-point bending tests were performed on a total of 8 specimens by adjusting the strengthening depths in the deviator position of EPT. The effective strengthening depths were 435, 535, and 610 mm. The pre-loading up to about 2/3 of ultimate load capacity measured in unstrengthened RC beam were applied in the beam to be post-tensioned. The EPT method was then applied to the pre-damaged RC beams and re-loading was added until the end of the test. EPT restored deflections of 3 mm or more, which account for about 40% of deflection when the pre-loading was applied. The shear strengthening increases more than 3 times and 36~107% in terms of the stiffness and load-carrying capacity compared to unstrengthening RC beams. The increased load-carrying capacities of the post-tensioned beam with strengthening depths of 435 and 535 mm are almost the same as 36~61%, and those of 610 mm are 84~107%, which shows the greatest shear strengthening effect.

키워드

과제정보

연구 과제 주관 기관 : 한국연구재단

참고문헌

  1. ACI Committee 318. (2014). Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14), American Concrete Institute (ACI), Farmington Hills, MI, USA.
  2. Adhikary, B. B., Mutsuyoshi, H., & Ashraf, M. (2004). Shear strengthening of reinforced concrete beams using fiber-reinforced polymer sheets with bonded anchorage, ACI Structural Journal, 101(5), 660-668.
  3. Adhikary, B. B, Mutsuyoshi, H., & Sano, M. (2000). Shear strengthening of reinforced concrete beams using steel plates bonded on beam web: experiments and analysis, Construction and Building Materials, 14(5), 237-244. https://doi.org/10.1016/S0950-0618(00)00023-4
  4. Al-Sulaimani, G. J., Sharif, A., Basunbul, I. A., Baluch, M. H., & Ghaleb, B. N. (1994). Shear repair for reinforced concrete by fiberglass plate bonding, ACI Structural Journal, 91(4), 458-464.
  5. Altin, S., Anil, O., & Kara, M. E. (2005). Improving shear capacity of existing RC beams using external bonding of steel plates, Engineering Structures, 27(5), 781-791. https://doi.org/10.1016/j.engstruct.2004.12.012
  6. Arslan, G., Sevuk, F., & Ekiz, I. (2008). Steel plate contribution to load-carrying capacity of retrofitted RC beams, Construction and Building Materials, 22(3), 143-153. https://doi.org/10.1016/j.conbuildmat.2006.10.009
  7. Barnes, R. A., Baglin, P. S., Mays, G. C., & Subedi, N. K. (2001). External steel plate systems for the shear strengthening of reinforced concrete beams, Engineering Structures, 23(9), 1162-1176. https://doi.org/10.1016/S0141-0296(00)00124-3
  8. Bilotta, A., Ceroni, F., Di Ludovico, M., Nigro, E., Pecce, M., & Manfredi, G. (2011). Bond efficiency of EBR and NSM FRP systems for strengthening concrete members, Journal of Composites for Construction, 15(5), 757-772. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000204
  9. Bukhari, I. A., Vollum, R. L., Ahmad, S., & Sagaseta, J. (2010). Shear strengthening of reinforced concrete beams with CFRP, Magazine of Concrete Research, 62(1), 65-77. https://doi.org/10.1680/macr.2008.62.1.65
  10. Chajes, M. J., Januska, T. F., Mertz, D. R., Thomson, T. A., & Finch, W. W. (1995). Shear strengthening of reinforced concrete beams using externally applied composite fabrics. ACI Structural Journal, 92(3), 295-303.
  11. De Lorenzis, L., Miller, B., & Nanni, A. (2001). Bond of fiber-reinforced polymer laminates to concrete, ACI Materials Journal, 98(3), 256-264.
  12. Del Vecchio, C., Di Ludovico, M., Balsamo, A., Prota, A., Manfredi, G., & Dolce, M. (2014). Experimental investigation of exterior RC beam-column joints retrofitted with FRP systems, Journal of Composites for Construction, 18(4), 04014002. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000459
  13. Dias, S. J. E., & Barros, J. A. O. (2011). Shear strengthening of RC T-section beams with low strength concrete using NSM CFRP laminates, Cement & Concrete Composites, 33(2), 334-345. https://doi.org/10.1016/j.cemconcomp.2010.10.002
  14. Dias, S. J. E., & Barros, J. A. O. (2012). NSM shear strengthening technique with CFRP laminates applied in high-strength concrete beams with or without pre-cracking, Composites: Part B, 43(2), 290-301. https://doi.org/10.1016/j.compositesb.2011.09.006
  15. Grelle, S. V., & Sneed, L. H. (2013). Review of anchorage systems for externally bonded FRP laminates, International Journal of Concrete Structures and Materials, 7(1), 17-33, https://doi.org/10.1007/s40069-013-0029-0
  16. Han, S. H., Hong, K. N., Shin, B. G., Lim, J. M., & Kwak, S. S. (2011). Characteristics of shear behavior of reinforced concrete beams strengthened with near surface mounted CFRP strips, Journal of the Korea Institute for Structural Maintenance and Inspection, 15(5), 178-189. (in Korean) https://doi.org/10.11112/jksmi.2011.15.5.178
  17. Hall, J. D., Schuman, P. M., & Hamilton III, H. R. (2002). Ductile anchorage for connecting FRP strengthening of under-reinforced masonry buildings, Journal of Composites for Construction, 6(1), 3-10. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:1(3)
  18. Harajli, H. H. (1993). Strengthening of concrete beams by external prestressing, PCI Journal, 38(6),76-88.
  19. Hong, K. N., Lee, S., Han, S. H., & Kang, P. (2018). Long-term flexural behavior of RC beams strengthened in flexure with NSM Fe-SMA strips, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(3), 103-110. (in Korean) https://doi.org/10.11112/JKSMI.2018.22.3.103
  20. Iovinella, I., Prota, A., & Mazzotti, C. (2013). Influence of surface roughness on the bond of FRP laminates to concrete, Construction and Building Materials, 40, 533-542. https://doi.org/10.1016/j.conbuildmat.2012.09.112
  21. Jin, Q., & Leung, C. K. Y. (2011). Fiber-reinforced-cementitious-composites plate for anchoring FRP sheet on concrete member, Journal of Composites for Construction, 15(5), 790-798. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000211
  22. Khalifa, A., Alkhrdaji, T., Nanni, A., & Lansburg, S. (1999). Anchorage of surface mounted FRP reinforcement, Concrete International: Design and Construction, 21(10), 49-54.
  23. Kim, I. S., Jirsa, J. O., & Bayrak, O. (2011). Use of carbon fiber-reinforced polymer anchors to repair and strengthen lap splices of reinforced concrete columns, ACI Structural Journal, 108(5), 630-640.
  24. Krauser, L. (2006). Repairs, modifications, and strengthening with post-tensioning, PTI Journal, 4(1), 24-40.
  25. Park, R., & Paulay, T. (1975). Reinforced Concrete Structures, John Wiley & Sons, New York, USA, 270-310.
  26. Rabbat, B. G., & Sowlat, K. (1987). Testing of segmental concrete girders with external tendons, PCI Journal, 32(2), 86-107.
  27. Norris, T., Saadatmanesh, H., Ehsani, M. R. (1997). Shear and flexural strengthening of R/C beams with carbon fiber sheets, Journal of Structural Engineering-ASCE, 123(7), 903-911. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(903)
  28. Sharif, A., Al-Sulaimani, G. J., Basunbul, I. A., Baluch, M. H., & Husain, M. (1995). Strengthening of shear-damaged RC beams by external bonding of steel plates, Magazine of Concrete Research, 47(173), 329-334. https://doi.org/10.1680/macr.1995.47.173.329
  29. Shin, K. J., & Lee, S. H. (2010). Flexural behaviour of RC beams strengthened with high-tension steel rod, Magazine of Concrete Research, 62(2), 137-147. https://doi.org/10.1680/macr.2008.62.2.137
  30. Subedi, N. K., & Baglin, P. S. (1998). External plate reinforcement for concrete beams, Journal of Structural Engineering-ASCE, 124(12), 1490-1495. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1490)
  31. Suntharavadivel, T. G., & Aravinthan, T. (2005). Overview of external post-tensioning in bridges, Southern Engineering Conference, 1-10.
  32. Taljsten, B., & Elfgren, L. (2000). Strengthening concrete beams for shear using CFRP-materials: evaluation of different application methods, Composites: Part B, 31(2), 87-96.
  33. Teng, S., Kong, F. K., Poh, S. P., Guan, L. W., & Tan, K. H. (1996). Performance of strengthened concrete deep beams predamaged in shear, ACI Structural Journal, 93(2), 159-170.
  34. Triantafillou, T. C. (1998). Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites, ACI Structural Journal, 95(2), 107-115.
  35. Yao, J., Teng, J. G., & Chen, J. F. (2005). Experimental study on FRP-to-concrete bonded joints, Composites: Part B, 36(2), 99-113. https://doi.org/10.1016/j.compositesb.2004.06.001